Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

General advice : Pay attention to self protection and imediately call for a doctor. Move out of dangerous area. Take off all contaminated clothing

immediately.

Inhalation : Remove to fresh air. If breathing is irregular or stopped, administer artificial respiration. If breathing is difficult, oxygen may be given

by qualified personnel. Obtain medical attention.

Skin contact : Immediately remove contaminated clothing and shoes. Wash off with soap and water. Obtain medical attention. Wash clothing before re-use. Discard contaminated leather articles such as shoes and belt.

Eye contact : Immediately flush eyes with water and continue washing for at least 15 minutes. Obtain medical attention without delay, preferably from an ophthalmologist.

Ingestion : If patient is fully conscious, give two glasses of milk or water at once. Do NOT induce vomiting. Call a physician immediately.

Fire-fighting measures

Suitable extinguishing media: Dry powder, Alcohol-resistant foam, Carbon dioxide (CO2)

Extinguishing media which shall not be used for safety reasons: Water - reacts violently with water.

Specific hazards during fire fighting: In case of fire, formation of hydrochloric acid, highly dispersed silicic acid.

Special protective equipment for fire-fighters: Wear self-contained breathing apparatus and protective suit.

Accidental release measures

Personal precautions : Use personal protective equipment.

Methods for cleaning up : Take up with an absorbent for chemicals or, otherwise use dry sand.

Handling and storage

Handling

Advice on safe handling:  Only open container under local extraction. Handle and open container with care. Take measures to prevent the build up of

electrostatic charge. Explosion protection necessary.

Storage

Requirements for storage areas and containers:  Keep container closed when not in use. Keep away from heat and flame.

Other data: stable

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
2987
Shipping information
Proper shipping name and description:
CHLOROSILANES, CORROSIVE, N.O.S
contains Cyanoethyltrichlorosilane
Chemical name:
Cyanoethyltrichlorosilane
Language:
English
Labels:
8
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
2987
Shipping information
Proper shipping name and description:
CHLOROSILANES, CORROSIVE, N.O.S
Contains Cyanoethyltrichlorosilane
Chemical name:
Cyanoethyltrichlorosilane
Language:
English
Labels:
8
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
2987
Shipping information
Proper shipping name and description:
CHLOROSILANES, CORROSIVE, N.O.S
Contains Cyanoethyltrichlorosilane
Chemical name:
Cyanoethytrichlorosilane
Labels:
8
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
2987
Shipping information
Proper shipping name and description:
CHLOROSILANES, CORROSIVE, N.O.S
Contains Cyanoethyltrichlorosilane
Chemical name:
Cyanoethyltrichlorosilane
Labels:
8
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Personal protective equipment

Respiratory protection : Respirator with a vapour filter (EN 141); Respiratory protection mask with Filtertype ABEK

Hand protection :

Advise : This recommendation is valid only for our Product as delivered. If this product will be mixed with other substances you need to contact a supplier of CE approved protective gloves (e.g. KCL GmbH, D-36124 Eichenzell, Tel. 0049 (0) 6659 87300, Fax.0049 (0) 6659 87155, email: vertrieb@kcl.de).

Material : 706 Lapren

Minimum break through time: 35 min

Glove thickness : 0,65 mm

Producer : KCL GmbH, D-36124 Eichenzell, Tel. 0049 (0) 665987300, Fax. 0049 (0) 6659 87155, email: vertrieb@kcl.de.

Advise : This recommendation is valid only for our Product as delivered. If this product will be mixed with other substances you need to contact a supplier of CE approved protective gloves (e.g. KCL GmbH, D-36124 Eichenzell, Tel. 0049 (0) 6659 87300, Fax.0049 (0) 6659 87155, email: vertrieb@kcl.de).

Material : 890 Vitoject

Minimum break throughtime: > 480 min

Glove thickness : 0,7 mm

Producer : KCL GmbH, D-36124 Eichenzell, Tel. 0049 (0) 665987300, Fax. 0049 (0) 6659 87155, email: vertrieb@kcl.de.

Eye protection : Safety glasses with side-shields conforming to EN166 Face-shield

Protective measures : Do not breathe vapour. Avoid contact with skin and eyes. If feeling unwell, a doctor should be consulted (if possible show

MSDS).

Stability and reactivity

Conditions to avoid :

Avoid contact with:  Water, Aqueous acids and alkalies, Ketones, Aldehydes, Alcohols, Organic acids, Peroxides, Amines, Strong oxidizing agents

Materials to avoid :

Reacts violently and exothermically with water to form:  Hydrogen chloride

Reacts rapidly if combined with: Aqueous acids, Aqueous bases, Ketones, Aldehydes, Alcohols, Organic acids, Peroxides, Amines, Oxidizing agents

Hazardous reactions : Hazardous polymerisation does not occur.

Further information :

Apply the following regulations and datasheets of the German BG Chemie. M 004 "Irritating substances - corrosive substances". M 053 "General industrial protective measures for handling dangerous substances".

Hazardous decomposition products:  

Burning can produce the following combustion products: Carbon oxides nitrogen oxides (NOx) Oxides of silicon, Hydrogen chloride, Hydrogen cyanide (hydrocyanic acid), Chlorine, Carbon monoxide (highly toxic if inhaled), carbon dioxide (in sufficient concentrations can act as an asphyxiant).  Acute overexposure to the products of combustion may result in irritation of the respiratory tract.

Disposal considerations

Product :

According to local regulations, can be taken to an appropriate incinerator equipped with exhaust gas cleaning.

Contaminated packaging :

Dispose of as unused product.