Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Water solubility

Currently viewing:

Administrative data

Link to relevant study record(s)

Referenceopen allclose all

Endpoint:
water solubility
Type of information:
experimental study
Adequacy of study:
key study
Study period:
November, 1941
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
study well documented, meets generally accepted scientific principles, acceptable for assessment
Qualifier:
no guideline followed
Principles of method if other than guideline:
Lactic acid had been prepared by the method of Smith and Claborn and an analysis (by a modified Eder and Kutter procedure) gave 60 % “directly titratable acid” and 102.0 % “total acid”, both expressed as lactic acid. It had the following physical properties: refractive index = 1.4361 (25 °C) and relative density = 1.2143 (25 °C).

The concentrated solution of potassium lactate salt was obtained by slow addition of a saturated solution of potassium hydroxide to the lactic acid. The reaction flasks were kept cool with an ice bath, as heat and a local excess of alkali caused discoloration. The resulting solution was more dilute than desired and was concentrated in vacuo, with the bath temperature kept below 50 °C. The solution contained a small amount of a gelatinous precipitate at this point , which was removed by filtering through Jena fritted glass filter. To ensure the absence of anhydrides, the final adjustments to the neutral point of phenolphthalein were made after the concentrated solutions had stood for one week, a procedure used by Dietzel and Rosenbaum in the preparation of pure potassium lactate for conductivity work. The potassium content of the solutions was determined by decomposing them with sulfuric acid and weighing the corresponding sulfates. This procedure is satisfactory, as the alkalines used met the AMERICAN CHEMICAL SOCIETY specifications (Am. Chem. Soc., "Specifications for Analytical Reagent Chemicals",1941). The concentrated solutions were diluted to the desired concentrations with triple distillied water.
GLP compliance:
no
Type of method:
other: Gravimetric determination of precipitate.
Key result
Water solubility:
1 126 g/L
Conc. based on:
other: see 'Remarks'
Remarks:
The potassium content of the solution was determined by weighing the sulfate precipitate after decomposition with sulfuric acid.
Temp.:
25 °C
Remarks on result:
other: pH not reported in the literature.
Details on results:
The maximum achievable concentration of Potassium lactate in water is approximately 78 % (w/w). The corresponding water solubility of the substance is reported to be approximately 1126 g/L. The potassium content of the solution was determined by weighing the sulfate precipitate after decomposition with sulfuric acid.
Conclusions:
The maximum solubility of potassium lactate in water at 25 °C determined by gravimetric analysis is 1126 g/L (78 % w/w).
Executive summary:

A concentrated solution of potassium lactate was obtained by slow addition of a saturated solution of potassium hydroxide to the lactic acid. The potassium content of the solution was determined by gravimetric analysis (weighing of precipitate) after decomposition with sulfuric acid. The maximum solubility of potassium lactate in water at 25 °C is 1126 g/L (78 % w/w).

Endpoint:
water solubility
Type of information:
read-across from supporting substance (structural analogue or surrogate)
Adequacy of study:
key study
Justification for type of information:
For details and justification of read-across please refer to the read-across report attached to IUCLID section 13.
Reason / purpose for cross-reference:
read-across source
Water solubility:
1 126 g/L
Conc. based on:
other: see 'Remarks'
Remarks:
The potassium content of the solution was determined by weighing the sulfate precipitate after decomposition with sulfuric acid.
Temp.:
25 °C
Remarks on result:
other: pH not reported in the literature.
Conclusions:
The maximum solubility of potassium lactate in water at 25 °C determined by gravimetric analysis is 1126 g/L (78 % w/w).
Executive summary:

A concentrated solution of potassium lacTate was obtained by slow addition of a saturated solution of potassium hydroxide to the lactic acid. The potassium content of the solution was determined by gravimetric analysis (weighing of precipitate) after decomposition with sulfuric acid. The maximum solubility of potassium lactate in water at 25 °C is 1126 g/L (78 % w/w).

This information is used in a read-across approach in the assessment of the target substance. For justification of read-across please refer to the read-across report attached to IUCLID section 13.

Description of key information

A concentrated solution of potassium lactate was obtained by slow addition of a saturated solution of potassium hydroxide to the lactic acid. The potassium content of the solution was determined by gravimetric analysis (weighing of precipitate) after decomposition with sulfuric acid. The maximum solubility of potassium lactate in water at 25 °C is 1126 g/L (78 % w/w).

Based on this result, it is assumed that the water solubility of the target substance Potassium-(S)-lactate is in the same range and therefore indicated with 1126 g/L.

Key value for chemical safety assessment

Water solubility:
1 126 g/L
at the temperature of:
25 °C

Additional information