Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 273-761-1 | CAS number: 69012-64-2 Amorphous silicon dioxide particles from the volatilization and vaporization of furnace feed materials in the manufacture of ferrosilicon and silicon.
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Formulation
Documentsopen allclose all
Formulation
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 15: Use as laboratory reagent
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category formulated:
- PC 0: Other: Building and construction preparations
- Substance supplied to that use in form of:
- as such
- in a mixture
- Related assessment:
- use not assessed
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Product category formulated:
- PC 0: Other: Building and construction preparations
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category formulated:
- PC 0: Other: Building and construction preparations
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Melting and casting
- Environmental release category (ERC):
- ERC2: Formulation into mixture
Contributing activity / technique for workers
- Name of activity / technique:
- Melting and casting
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category formulated:
- PC 7: Base metals and alloys
- Substance supplied to that use in form of:
- in a mixture
- Pattern of exposure:
- accidental / infrequent
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Substance supplied to that use in form of:
- as such
Formulation
- Name:
- silica fumes
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- silica fumes
- Type of information reported:
- single nanoform
- This nanoform is covered by a registration:
- yes
- Name of nanoform:
- Silica-fume_spherical-amorphous-OR
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D90
- Typical value:
- ca. 87.2 nm
- Range:
- >= 80 - <= 155 nm
- Percentile:
- D50
- Typical value:
- ca. 25.8 nm
- Range:
- >= 20 - <= 47 nm
- Percentile:
- D10
- Typical value:
- ca. 11.9 nm
- Range:
- >= 9 - <= 21 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 82 - <= 92 %
- Structure:
- amorphous
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Crystal system:
- not applicable
- Typical specific surface area:
- ca. 12 m²/g
- Range of specific surface area:
- >= 10.6 - <= 14.2 m²/g
- Skeletal density:
- ca. 2.65 g/cm³
- Surface treatment applied:
- no
- Name:
- silica fumes
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- silica fumes
- Type of information reported:
- single nanoform
- This nanoform is covered by a registration:
- yes
- Name of nanoform:
- Silica-fume_spherical-amorphous
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D90
- Typical value:
- ca. 87.2 nm
- Range:
- >= 80 - <= 155 nm
- Percentile:
- D50
- Typical value:
- ca. 25.8 nm
- Range:
- >= 20 - <= 47 nm
- Percentile:
- D10
- Typical value:
- ca. 11.9 nm
- Range:
- >= 9 - <= 21 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 82 - <= 92 %
- Structure:
- amorphous
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Crystal system:
- not applicable
- Typical specific surface area:
- ca. 12 m²/g
- Range of specific surface area:
- >= 10.6 - <= 14.2 m²/g
- Skeletal density:
- ca. 2.65 g/cm³
- Surface treatment applied:
- no
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category formulated:
- PC 9b: Fillers, putties, plasters, modelling clay
- Substance supplied to that use in form of:
- as such
- in a mixture
Referenceopen allclose all
Contributing activity / technique for the environmentopen allclose all
Contributing activity / technique for workersopen allclose all
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category formulated:
- PC 0: Other: Building and construction preparations
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC2: Formulation into mixture
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Product category formulated:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Product category formulated:
- PC 32: Polymer preparations and compounds
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Product category formulated:
- PC 32: Polymer preparations and compounds
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category formulated:
- PC 0: Other: Building and construction preparations
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC2: Formulation into mixture
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Product category formulated:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Product category formulated:
- PC 32: Polymer preparations and compounds
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category formulated:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category formulated:
- PC 0: Other: Building and construction preparations
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Product category formulated:
- PC 32: Polymer preparations and compounds
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Product category formulated:
- PC 0: Other: Building and construction preparations
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category formulated:
- PC 0: Other: Building and construction preparations
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
- Name:
- silica fumes
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- silica fumes
- Type of information reported:
- single nanoform
- This nanoform is covered by a registration:
- yes
- Name of nanoform:
- Silica-fume_spherical-amorphous-OR
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D90
- Typical value:
- ca. 87.2 nm
- Range:
- >= 80 - <= 155 nm
- Percentile:
- D50
- Typical value:
- ca. 25.8 nm
- Range:
- >= 20 - <= 47 nm
- Percentile:
- D10
- Typical value:
- ca. 11.9 nm
- Range:
- >= 9 - <= 21 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 82 - <= 92 %
- Structure:
- amorphous
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Crystal system:
- not applicable
- Typical specific surface area:
- ca. 12 m²/g
- Range of specific surface area:
- >= 10.6 - <= 14.2 m²/g
- Skeletal density:
- ca. 2.65 g/cm³
- Surface treatment applied:
- no
- Name:
- silica fumes
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- silica fumes
- Type of information reported:
- single nanoform
- This nanoform is covered by a registration:
- yes
- Name of nanoform:
- Silica-fume_spherical-amorphous
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D90
- Typical value:
- ca. 87.2 nm
- Range:
- >= 80 - <= 155 nm
- Percentile:
- D50
- Typical value:
- ca. 25.8 nm
- Range:
- >= 20 - <= 47 nm
- Percentile:
- D10
- Typical value:
- ca. 11.9 nm
- Range:
- >= 9 - <= 21 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 82 - <= 92 %
- Structure:
- amorphous
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Crystal system:
- not applicable
- Typical specific surface area:
- ca. 12 m²/g
- Range of specific surface area:
- >= 10.6 - <= 14.2 m²/g
- Skeletal density:
- ca. 2.65 g/cm³
- Surface treatment applied:
- no
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Product category formulated:
- PC 0: Other: Building and construction preparations
- Substance supplied to that use in form of:
- as such
Referenceopen allclose all
Contributing activity / technique for the environmentopen allclose all
Contributing activity / technique for workers
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Product category formulated:
- PC 32: Polymer preparations and compounds
- Substance supplied to that use in form of:
- as such
Formulation
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Name:
- Silica fumes
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Silica fumes
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category formulated:
- PC 12: Fertilisers
- Substance supplied to that use in form of:
- in a mixture
- Insignificant exposure via the following route:
- oral
- dermal
- eye
- inhalatory
- Insignificant release via the following route:
- water
- air
- soil
- Pattern of exposure:
- accidental / infrequent
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Formulation
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Formulation
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Name of activity / technique:
- Formulation
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 13: Treatment of articles by dipping and pouring
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Product category formulated:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 21: Laboratory chemicals
- PC 0: Other: surface treatments
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
- Name:
- silica fumes
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- silica fumes
- Type of information reported:
- single nanoform
- This nanoform is covered by a registration:
- yes
- Name of nanoform:
- Silica-fume_spherical-amorphous-OR
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D90
- Typical value:
- ca. 87.2 nm
- Range:
- >= 80 - <= 155 nm
- Percentile:
- D50
- Typical value:
- ca. 25.8 nm
- Range:
- >= 20 - <= 47 nm
- Percentile:
- D10
- Typical value:
- ca. 11.9 nm
- Range:
- >= 9 - <= 21 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 82 - <= 92 %
- Structure:
- amorphous
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Crystal system:
- not applicable
- Typical specific surface area:
- ca. 12 m²/g
- Range of specific surface area:
- >= 10.6 - <= 14.2 m²/g
- Skeletal density:
- ca. 2.65 g/cm³
- Surface treatment applied:
- no
- Name:
- silica fumes
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- silica fumes
- Type of information reported:
- single nanoform
- This nanoform is covered by a registration:
- yes
- Name of nanoform:
- Silica-fume_spherical-amorphous
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D90
- Typical value:
- ca. 87.2 nm
- Range:
- >= 80 - <= 155 nm
- Percentile:
- D50
- Typical value:
- ca. 25.8 nm
- Range:
- >= 20 - <= 47 nm
- Percentile:
- D10
- Typical value:
- ca. 11.9 nm
- Range:
- >= 9 - <= 21 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 82 - <= 92 %
- Structure:
- amorphous
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Crystal system:
- not applicable
- Typical specific surface area:
- ca. 12 m²/g
- Range of specific surface area:
- >= 10.6 - <= 14.2 m²/g
- Skeletal density:
- ca. 2.65 g/cm³
- Surface treatment applied:
- no
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Product category formulated:
- PC 0: Other: Building and construction preparations
- Substance supplied to that use in form of:
- as such
Referenceopen allclose all
Contributing activity / technique for the environmentopen allclose all
Contributing activity / technique for workersopen allclose all
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Substance supplied to that use in form of:
- as such
Formulation
- Name:
- silica fumes
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- silica fumes
- Type of information reported:
- single nanoform
- This nanoform is covered by a registration:
- yes
- Name of nanoform:
- Silica-fume_spherical-amorphous-OR
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D90
- Typical value:
- ca. 87.2 nm
- Range:
- >= 80 - <= 155 nm
- Percentile:
- D50
- Typical value:
- ca. 25.8 nm
- Range:
- >= 20 - <= 47 nm
- Percentile:
- D10
- Typical value:
- ca. 11.9 nm
- Range:
- >= 9 - <= 21 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 82 - <= 92 %
- Structure:
- amorphous
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Crystal system:
- not applicable
- Typical specific surface area:
- ca. 12 m²/g
- Range of specific surface area:
- >= 10.6 - <= 14.2 m²/g
- Skeletal density:
- ca. 2.65 g/cm³
- Surface treatment applied:
- no
- Name:
- silica fumes
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- silica fumes
- Type of information reported:
- single nanoform
- This nanoform is covered by a registration:
- yes
- Name of nanoform:
- Silica-fume_spherical-amorphous
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D90
- Typical value:
- ca. 87.2 nm
- Range:
- >= 80 - <= 155 nm
- Percentile:
- D50
- Typical value:
- ca. 25.8 nm
- Range:
- >= 20 - <= 47 nm
- Percentile:
- D10
- Typical value:
- ca. 11.9 nm
- Range:
- >= 9 - <= 21 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 82 - <= 92 %
- Structure:
- amorphous
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Crystal system:
- not applicable
- Typical specific surface area:
- ca. 12 m²/g
- Range of specific surface area:
- >= 10.6 - <= 14.2 m²/g
- Skeletal density:
- ca. 2.65 g/cm³
- Surface treatment applied:
- no
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category formulated:
- PC 0: Other: Building and construction preparations
- Substance supplied to that use in form of:
- as such
Referenceopen allclose all
Contributing activity / technique for the environmentopen allclose all
Contributing activity / technique for workersopen allclose all
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category formulated:
- PC 0: Other: Building and construction preparations
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category formulated:
- PC 0: Other: Building and construction preparations
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category formulated:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
- Name:
- Fumed, silica (amorphous)
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- Fumed, silica (amorphous)
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- ERC3: Formulation into solid matrix
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Product category formulated:
- PC 0: Other: Refractory products as filler
- Substance supplied to that use in form of:
- as such
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Formulation
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- mixing, forming
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Name of activity / technique:
- mixing and forming
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Product category formulated:
- PC 0: Other: refractory products
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category formulated:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Product category formulated:
- PC 32: Polymer preparations and compounds
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category formulated:
- PC 9a: Coatings and paints, thinners, paint removes
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC2: Formulation into mixture
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- Product category formulated:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category formulated:
- PC 0: Other: Building and construction preparations
- Substance supplied to that use in form of:
- as such
Formulation
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC2: Formulation into mixture
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category formulated:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 32: Polymer preparations and compounds
- Substance supplied to that use in form of:
- as such
- in a mixture
- Related assessment:
- use not assessed
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category formulated:
- PC 0: Other: Building and construction preparations
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Product category formulated:
- PC 0: Other: Building and construction preparations
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category formulated:
- PC 0: Other: Building and construction preparations
- Substance supplied to that use in form of:
- as such
Formulation
- Name:
- silica fumes
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- silica fumes
- Type of information reported:
- single nanoform
- This nanoform is covered by a registration:
- yes
- Name of nanoform:
- Silica-fume_spherical-amorphous-OR
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D90
- Typical value:
- ca. 87.2 nm
- Range:
- >= 80 - <= 155 nm
- Percentile:
- D50
- Typical value:
- ca. 25.8 nm
- Range:
- >= 20 - <= 47 nm
- Percentile:
- D10
- Typical value:
- ca. 11.9 nm
- Range:
- >= 9 - <= 21 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 82 - <= 92 %
- Structure:
- amorphous
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Crystal system:
- not applicable
- Typical specific surface area:
- ca. 12 m²/g
- Range of specific surface area:
- >= 10.6 - <= 14.2 m²/g
- Skeletal density:
- ca. 2.65 g/cm³
- Surface treatment applied:
- no
- Name:
- silica fumes
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- silica fumes
- Type of information reported:
- single nanoform
- This nanoform is covered by a registration:
- yes
- Name of nanoform:
- Silica-fume_spherical-amorphous
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D90
- Typical value:
- ca. 87.2 nm
- Range:
- >= 80 - <= 155 nm
- Percentile:
- D50
- Typical value:
- ca. 25.8 nm
- Range:
- >= 20 - <= 47 nm
- Percentile:
- D10
- Typical value:
- ca. 11.9 nm
- Range:
- >= 9 - <= 21 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 82 - <= 92 %
- Structure:
- amorphous
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Crystal system:
- not applicable
- Typical specific surface area:
- ca. 12 m²/g
- Range of specific surface area:
- >= 10.6 - <= 14.2 m²/g
- Skeletal density:
- ca. 2.65 g/cm³
- Surface treatment applied:
- no
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category formulated:
- PC 0: Other: Building and construction preparations
- Substance supplied to that use in form of:
- as such
Referenceopen allclose all
Contributing activity / technique for the environmentopen allclose all
Contributing activity / technique for workersopen allclose all
Formulation
- Name:
- silica fumes
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- silica fumes
- Type of information reported:
- single nanoform
- This nanoform is covered by a registration:
- yes
- Name of nanoform:
- Silica-fume_spherical-amorphous-OR
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D90
- Typical value:
- ca. 87.2 nm
- Range:
- >= 80 - <= 155 nm
- Percentile:
- D50
- Typical value:
- ca. 25.8 nm
- Range:
- >= 20 - <= 47 nm
- Percentile:
- D10
- Typical value:
- ca. 11.9 nm
- Range:
- >= 9 - <= 21 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 82 - <= 92 %
- Structure:
- amorphous
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Crystal system:
- not applicable
- Typical specific surface area:
- ca. 12 m²/g
- Range of specific surface area:
- >= 10.6 - <= 14.2 m²/g
- Skeletal density:
- ca. 2.65 g/cm³
- Surface treatment applied:
- no
- Name:
- silica fumes
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- silica fumes
- Type of information reported:
- single nanoform
- This nanoform is covered by a registration:
- yes
- Name of nanoform:
- Silica-fume_spherical-amorphous
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D90
- Typical value:
- ca. 87.2 nm
- Range:
- >= 80 - <= 155 nm
- Percentile:
- D50
- Typical value:
- ca. 25.8 nm
- Range:
- >= 20 - <= 47 nm
- Percentile:
- D10
- Typical value:
- ca. 11.9 nm
- Range:
- >= 9 - <= 21 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 82 - <= 92 %
- Structure:
- amorphous
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Crystal system:
- not applicable
- Typical specific surface area:
- ca. 12 m²/g
- Range of specific surface area:
- >= 10.6 - <= 14.2 m²/g
- Skeletal density:
- ca. 2.65 g/cm³
- Surface treatment applied:
- no
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Product category formulated:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- Substance supplied to that use in form of:
- as such
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for workers
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Substance supplied to that use in form of:
- as such
Formulation
- Name:
- silica fumes
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- silica fumes
- Type of information reported:
- single nanoform
- This nanoform is covered by a registration:
- yes
- Name of nanoform:
- Silica-fume_spherical-amorphous-OR
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D90
- Typical value:
- ca. 87.2 nm
- Range:
- >= 80 - <= 155 nm
- Percentile:
- D50
- Typical value:
- ca. 25.8 nm
- Range:
- >= 20 - <= 47 nm
- Percentile:
- D10
- Typical value:
- ca. 11.9 nm
- Range:
- >= 9 - <= 21 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 82 - <= 92 %
- Structure:
- amorphous
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Crystal system:
- not applicable
- Typical specific surface area:
- ca. 12 m²/g
- Range of specific surface area:
- >= 10.6 - <= 14.2 m²/g
- Skeletal density:
- ca. 2.65 g/cm³
- Surface treatment applied:
- no
- Name:
- silica fumes
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- silica fumes
- Type of information reported:
- single nanoform
- This nanoform is covered by a registration:
- yes
- Name of nanoform:
- Silica-fume_spherical-amorphous
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D90
- Typical value:
- ca. 87.2 nm
- Range:
- >= 80 - <= 155 nm
- Percentile:
- D50
- Typical value:
- ca. 25.8 nm
- Range:
- >= 20 - <= 47 nm
- Percentile:
- D10
- Typical value:
- ca. 11.9 nm
- Range:
- >= 9 - <= 21 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 82 - <= 92 %
- Structure:
- amorphous
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Crystal system:
- not applicable
- Typical specific surface area:
- ca. 12 m²/g
- Range of specific surface area:
- >= 10.6 - <= 14.2 m²/g
- Skeletal density:
- ca. 2.65 g/cm³
- Surface treatment applied:
- no
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category formulated:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- Substance supplied to that use in form of:
- as such
- in a mixture
Referenceopen allclose all
Contributing activity / technique for the environmentopen allclose all
Contributing activity / technique for workersopen allclose all
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Product category formulated:
- PC 32: Polymer preparations and compounds
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category formulated:
- PC 32: Polymer preparations and compounds
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC2: Formulation into mixture
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Product category formulated:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Substance supplied to that use in form of:
- as such
- in a mixture
Formulation
- Name:
- silica fumes
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- silica fumes
- Type of information reported:
- single nanoform
- This nanoform is covered by a registration:
- yes
- Name of nanoform:
- Silica-fume_spherical-amorphous-OR
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D90
- Typical value:
- ca. 87.2 nm
- Range:
- >= 80 - <= 155 nm
- Percentile:
- D50
- Typical value:
- ca. 25.8 nm
- Range:
- >= 20 - <= 47 nm
- Percentile:
- D10
- Typical value:
- ca. 11.9 nm
- Range:
- >= 9 - <= 21 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 82 - <= 92 %
- Structure:
- amorphous
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Crystal system:
- not applicable
- Typical specific surface area:
- ca. 12 m²/g
- Range of specific surface area:
- >= 10.6 - <= 14.2 m²/g
- Skeletal density:
- ca. 2.65 g/cm³
- Surface treatment applied:
- no
- Name:
- silica fumes
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- silica fumes
- Type of information reported:
- single nanoform
- This nanoform is covered by a registration:
- yes
- Name of nanoform:
- Silica-fume_spherical-amorphous
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D90
- Typical value:
- ca. 87.2 nm
- Range:
- >= 80 - <= 155 nm
- Percentile:
- D50
- Typical value:
- ca. 25.8 nm
- Range:
- >= 20 - <= 47 nm
- Percentile:
- D10
- Typical value:
- ca. 11.9 nm
- Range:
- >= 9 - <= 21 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 82 - <= 92 %
- Structure:
- amorphous
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 %
- Crystal system:
- not applicable
- Typical specific surface area:
- ca. 12 m²/g
- Range of specific surface area:
- >= 10.6 - <= 14.2 m²/g
- Skeletal density:
- ca. 2.65 g/cm³
- Surface treatment applied:
- no
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category formulated:
- PC 0: Other: Building and construction preparations
- Substance supplied to that use in form of:
- as such
- in a mixture
Referenceopen allclose all
Contributing activity / technique for the environmentopen allclose all
Contributing activity / technique for workersopen allclose all
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Product category formulated:
- PC 0: Other: Building and construction preparations
- Substance supplied to that use in form of:
- as such
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Substance supplied to that use in form of:
- as such
- in a mixture
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Formulation
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category formulated:
- PC 0: Other: Building and construction preparations
- Substance supplied to that use in form of:
- as such
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.