Registration Dossier

Administrative data

First-aid measures

General information:
- Immediately remove any clothing soiled by the product.
After inhalation:
-Supply fresh air; consult doctor in case of complaints.
After skin contact:
- At first remove dust mechanically.
- Immediately wash with water and soap and rinse thoroughly.
- If skin irritation continues, consult a doctor.
After eye contact:
- Remove contact lenses.
- Protect unharmed eye.
- Rinse opened eye for several minutes under running water. Then consult a doctor.
After swallowing:
- Rinse out mouth and then drink plenty of water.
- Do not induce vomiting; call for medical help immediately.
- A person vomiting while laying on their back should be turned onto their side.
- Never give anything to the mouth of an unconscious person.
Treatment:
- If swallowed, gastric irrigation.

Fire-fighting measures

Suitable extinguishing agents:
- Use fire extinguishing methods suitable to surrounding conditions.
Special hazards caused by the substance, its products of combustion or resulting gases:
- Formation of toxic gases is possible during heating or in case of fire.
In case of fire, the following can be released:
- Carbon monoxide and carbon dioxide
- Zinc compounds
Protective equipment:
- Do not inhale explosion gases or combustion gases.
- Wear fully protective suit.
- Wear self-contained respiratory protective device.
Additional information
- Product is not combustible.
- Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
- Collect contaminated fire fighting water separately. It must not enter the sewage system.

Accidental release measures

Person-related safety precautions:
- Wear protective equipment. Keep unprotected persons away.
- Ensure adequate ventilation
- Avoid formation of dust.
Measures for environmental protection:
- Do not allow to enter sewers/ surface or ground water.
Measures for cleaning/collecting:
- Pick up mechanically.
- Send for recovery or disposal in suitable receptacles.
- Prevent formation of dust.
Additional information:
-No dangerous substances are released.

Handling and storage

Handling:
Information for safe handling:
- No special measures required.
- Keep receptacles tightly sealed.
- Prevent formation of dust.
- Ensure good ventilation/exhaustion at the workplace.
- Any unavoidable deposit of dust must be regularly removed.
- Wear suitable respiratory protective device when aerosols are formed.
Information about fire - and explosion protection:
- No special measures required.
Storage / Requirements to be met by storerooms and receptacles:
- No special requirements.
Information about storage in one common storage facility:
- Store away from feed and foodstuffs.
Further information about storage conditions:
- Keep container tightly sealed.
- Store in dry conditions.
- Storage temperature: 0 °C up to 50 °C.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
Not classified for transport regulation.

Exposure controls / personal protection

Ingredients with limit values that require monitoring at the workplace:
- The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace.
Additional information:
- The lists valid during the making were used as basis.
Personal protective equipment / General protective and hygienic measures:
- The usual precautionary measures are to be adhered to when handling chemicals.
- Keep away from foodstuffs, beverages and feed.
Respiratory protection:
- If dust occurs wear suitable respiratory device.
Protection of hands:
- chemicals resistant gloves.
- The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
- Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/the chemical mixture.
- Softening of the callus when wearing air-impermeable gloves is possible.
- Check protective gloves prior to each use for their proper condition.
- After use of gloves apply skin-cleaning agents and skin cosmetics.
- Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation

Material of gloves
- The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material:
-The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Eye protection:
- Tightly sealed goggles
Body protection:
- Protective work clothing
- Selection of protective clothing is subject to the specific kind of work and the corresponding risk potential.

Stability and reactivity

Thermal decomposition / conditions to be avoided:
- No decomposition if used according to specifications.
- To avoid thermal decomposition do not overheat.
- Stable up to 100°C
Dangerous reactions:
- No dangerous reactions known.
Dangerous decomposition products:
- No dangerous decomposition products known.

Additional information:
- Soluble in organic solvents.
- Stable for 1 year after production.

Disposal considerations

Recommendation:
- Disposal must be made according to official regulations.
European waste catalogue:
16 00 00 WASTES NOT OTHERWISE SPECIFIED IN THE LIST
16 03 00 off-specification batches and unused products
16 03 06 organic wastes other than those mentioned in 16 03 05

Recommendation:
- Disposal must be made according to official regulations.
Recommended cleansing agents:
- Water, if necessary together with cleansing agents.