Sodium mentholate

Density

Link to relevant study record(s)

Reference

Endpoint:

bulk density

Type of information:

experimental study

Adequacy of study:

key study

Study period:

2020

Reliability:

2 (reliable with restrictions)

Rationale for reliability incl. deficiencies:

test procedure in accordance with national standard methods with acceptable restrictions

Reason / purpose for cross-reference:

reference to same study

Reason / purpose for cross-reference:

reference to same study

Reason / purpose for cross-reference:

reference to same study

Qualifier:

no guideline followed

Principles of method if other than guideline:

The bulk density of the test item was determined with a measuring cylinder via weight measuring a proper volume. For details refer to below sections.

GLP compliance:

no

Type of method:

pour and tap (for solids)

Type:

bulk density

Density:

0.43 g/cm³

Remarks on result:

other: Temperature not of significant relevance for solid samples

Conclusions:

Bulk density was measured to be 0.430 g/cm³.

Executive summary:

The bulk density of the test item was determined in an in-house study with a measuring cylinder via weight measuring a proper volume. Bulk density was measured to be 0.430 g/cm³.

Description of key information

The bulk density of the test item was determined in an in-house study with a measuring cylinder via weight measuring a proper volume. Bulk density was measured to be 0.430 g/cm³.

Key value for chemical safety assessment

Relative density at 20C:

0.43

Additional information

Relative density is calculated by dividing the bulk density of the test item through the density of water at 4 °C. Temperature of the sample density is not of significant relevance because of the solid state. Therefore 20 °C are applicable for chemical safety assessment.