Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 231-588-9 | CAS number: 7646-78-8
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
4.1 Description of first aid measures
· General information Remove contaminated clothing.
· After inhalation Supply fresh air; consult doctor in case of symptoms.
· After skin contact
Seek medical treatment.
Immediately wash with water and soap and rinse thoroughly.
· After eye contact Rinse opened eye for several minutes under running water. Then consult doctor.
· After swallowing
Drink large quantities of water, do not induce vomiting. Consult a physician immediately.
Drink copious amounts of water and provide fresh air. Instantly call for doctor.
· 4.2 Most important symptoms and effects, both acute and delayed
No further relevant information available.
· 4.3 Indication of any immediate medical attention and special treatment needed
No further relevant information available.
· General information Remove contaminated clothing.
· After inhalation Supply fresh air; consult doctor in case of symptoms.
· After skin contact
Seek medical treatment.
Immediately wash with water and soap and rinse thoroughly.
· After eye contact Rinse opened eye for several minutes under running water. Then consult doctor.
· After swallowing
Drink large quantities of water, do not induce vomiting. Consult a physician immediately.
Drink copious amounts of water and provide fresh air. Instantly call for doctor.
· 4.2 Most important symptoms and effects, both acute and delayed
No further relevant information available.
· 4.3 Indication of any immediate medical attention and special treatment needed
No further relevant information available.
Fire-fighting measures
5.1 Extinguishing media
· Suitable extinguishing agents
Product itself is non-combustible; In the case of fire adapt the extinguishing measures to the
surroundings.
· For safety reasons unsuitable extinguishing agents
Water.
Foam.
· 5.2 Special hazards arising from the substance or mixture Hydrogen chloride (HCl)
· 5.3 Advice for firefighters
· Protective equipment:
Do not inhale explosion gases or combustion gases.
Wear self-contained breathing apparatus.
· Suitable extinguishing agents
Product itself is non-combustible; In the case of fire adapt the extinguishing measures to the
surroundings.
· For safety reasons unsuitable extinguishing agents
Water.
Foam.
· 5.2 Special hazards arising from the substance or mixture Hydrogen chloride (HCl)
· 5.3 Advice for firefighters
· Protective equipment:
Do not inhale explosion gases or combustion gases.
Wear self-contained breathing apparatus.
Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Wear protective clothing.
Wear protective equipment. Keep unprotected persons away.
· 6.2 Environmental precautions:
Do not allow to enter the ground/soil.
Inform respective authorities in case product reaches water or sewage system.
Dilute with much water.
· 6.3 Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Use neutralising agent.
Dispose of contaminated material as waste according to item 13.
Ensure adequate ventilation.
6.4 Reference to other sections
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for information on disposal.
Wear protective clothing.
Wear protective equipment. Keep unprotected persons away.
· 6.2 Environmental precautions:
Do not allow to enter the ground/soil.
Inform respective authorities in case product reaches water or sewage system.
Dilute with much water.
· 6.3 Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Use neutralising agent.
Dispose of contaminated material as waste according to item 13.
Ensure adequate ventilation.
6.4 Reference to other sections
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for information on disposal.
Handling and storage
· 7.1 Precautions for safe handling
Use only in well ventilated areas.
Ensure that suitable extractors are available on processing machines
· Information about protection against explosions and fires:
Cool endangered containers by water spray
· 7.2 Conditions for safe storage, including any incompatibilities
· Storage
· Requirements to be met by storerooms and containers:
No special requirements.
Store only in the original container.
· Information about storage in one common storage facility: Not required.
· Further information about storage conditions:
Keep container tightly closed and dry in a cool, well-ventilated place.
Protect from humidity and keep away from water.
Keep container tightly sealed.
Store in cool, dry conditions in well sealed containers.
· Storage class LGK 8B
· 7.3 Specific end use(s) No further relevant information available.
Use only in well ventilated areas.
Ensure that suitable extractors are available on processing machines
· Information about protection against explosions and fires:
Cool endangered containers by water spray
· 7.2 Conditions for safe storage, including any incompatibilities
· Storage
· Requirements to be met by storerooms and containers:
No special requirements.
Store only in the original container.
· Information about storage in one common storage facility: Not required.
· Further information about storage conditions:
Keep container tightly closed and dry in a cool, well-ventilated place.
Protect from humidity and keep away from water.
Keep container tightly sealed.
Store in cool, dry conditions in well sealed containers.
· Storage class LGK 8B
· 7.3 Specific end use(s) No further relevant information available.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- 1827
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- 1827
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- 1827
Shipping information
- Proper shipping name and description:
- STANNIC CHLORIDE, ANHYDROUS
· IMDG, IATA STANNIC CHLORIDE, ANHYDROUS - Chemical name:
- STANNIC CHLORIDE, ANHYDROUS
- Labels:
- 8
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- 1827
Shipping information
- Proper shipping name and description:
- STANNIC CHLORIDE, ANHYDROUS
· IMDG, IATA STANNIC CHLORIDE, ANHYDROUS - Chemical name:
- STANNIC CHLORIDE, ANHYDROUS
- Labels:
- 8
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Additional information about design of technical systems: No further data; see item 7.
· 8.1 Control parameters
· Components with limit values that require monitoring at the workplace:
7646-78-8 tin tetrachloride
IOELV Long-term value: 2 mg/m³
as Sn
· Additional information: The lists that were valid during the compilation were used as basis.
· 8.2 Exposure controls
· Personal protective equipment
· General protective and hygienic measures
Do not eat, drink or smoke while working.
Keep away from foodstuffs, beverages and food.
Take off immediately all contaminated clothing
Wash hands during breaks and at the end of the work.
Avoid contact with the eyes and skin.
· Breathing equipment: In case of formation of vapours/dusts:
· Recommended filter device for short term use: Filter E
Protection of hands:
Protective gloves.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
· Material of gloves
Rubber gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of
quality and varies from manufacturer to manufacturer. As the product is a preparation of several
substances, the resistance of the glove material can not be calculated in advance and has therefore to
be checked prior to the application.
· Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has
to be observed.
· Eye protection:
Goggles, or face shield if necessary
Tightly sealed safety glasses.
· Body protection: suitable clothing
· Boots made from rubber
· Apron: made from rubber
· 8.1 Control parameters
· Components with limit values that require monitoring at the workplace:
7646-78-8 tin tetrachloride
IOELV Long-term value: 2 mg/m³
as Sn
· Additional information: The lists that were valid during the compilation were used as basis.
· 8.2 Exposure controls
· Personal protective equipment
· General protective and hygienic measures
Do not eat, drink or smoke while working.
Keep away from foodstuffs, beverages and food.
Take off immediately all contaminated clothing
Wash hands during breaks and at the end of the work.
Avoid contact with the eyes and skin.
· Breathing equipment: In case of formation of vapours/dusts:
· Recommended filter device for short term use: Filter E
Protection of hands:
Protective gloves.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
· Material of gloves
Rubber gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of
quality and varies from manufacturer to manufacturer. As the product is a preparation of several
substances, the resistance of the glove material can not be calculated in advance and has therefore to
be checked prior to the application.
· Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has
to be observed.
· Eye protection:
Goggles, or face shield if necessary
Tightly sealed safety glasses.
· Body protection: suitable clothing
· Boots made from rubber
· Apron: made from rubber
Stability and reactivity
· 10.1 Reactivity No further relevant information available.
· 10.2 Chemical stability
· Thermal decomposition / conditions to be avoided:
No decomposition if used according to specifications.
· 10.3 Possibility of hazardous reactions
Reacts with water
Reacts with alkali (lyes)
Exothermic reaction
· 10.4 Conditions to avoid No further relevant information available.
· 10.5 Incompatible materials: No further relevant information available.
· 10.6 Hazardous decomposition products: Hydrogen chloride (HCl)
· 10.2 Chemical stability
· Thermal decomposition / conditions to be avoided:
No decomposition if used according to specifications.
· 10.3 Possibility of hazardous reactions
Reacts with water
Reacts with alkali (lyes)
Exothermic reaction
· 10.4 Conditions to avoid No further relevant information available.
· 10.5 Incompatible materials: No further relevant information available.
· 10.6 Hazardous decomposition products: Hydrogen chloride (HCl)
Disposal considerations
· 13.1 Waste treatment methods
· Recommendation Must be specially treated under adherence to official regulations.
· Uncleaned packagings:
· Recommendation: Disposal must be made according to official regulations.
· Recommended cleaning agent: Water, if necessary with cleaning agent.
· Recommendation Must be specially treated under adherence to official regulations.
· Uncleaned packagings:
· Recommendation: Disposal must be made according to official regulations.
· Recommended cleaning agent: Water, if necessary with cleaning agent.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
