Registration Dossier

Administrative data

First-aid measures

General advice:
If exposed or concerned: get medical advice/attention.

Inhalation:
If inhaled, remove person to fresh air; keep warm and comfortable for breathing. If concernd call a POISON CENTER or doctor/physician.

Skin contact:
After contact with skin, wash immediately with plenty of soap and water. If skin irritation or rash occurs: get medical advice/attention.

Eye contact:
In the case of contact with eyes, rinse cautiously with water for 15 minutes at least. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation occurs: get medical advice/attention.

Ingestion:
If swallowed, rinse mouth; call a POISON CENTER/seek medical advice and show the SDS or label.

Fire-fighting measures

Suitable extinguishing media:
Water spray, carbon dioxide, dry chemical powder, appropriate foam.

Unsuitable extinguishing agents:
Unknown.

Special exposure hazards:
In the event of fire, may produce toxic fumes that are irritating and contain carbon monoxide (CO), nitrogen oxides (NOx) and other hazardous substances.

Special protective equipment for fire-fighters:
In the event of fire, wear self-contained breathing apparatus and protective suitable clothes. Equipment must be conformed with EN criteria. Collect contaminated fire extinguishing water separately. This must not be discharged into drains.

Accidental release measures

Personal Precautions:
Alert and restrict entry. Do not enter the contaminated area without suitable protective equipment such as suitable disposable clothes with long sleeves, apposite gloves, safety goggles, safety shoes and half mask or face mask (all used masks are EC certified). Keep away from/remove sources of ignition.

Enviromental Precautions:
Collect the spillage. Do not flush into surface water or sanitary sewer system. Do not allow under any circumstances to reach drains, surface water and ground water.

Methods for cleaning or taking up:
Spray powder with water to prevent the formation of dust. Take up mechanically and fill into suitable labelled, closed bags/containers.

Handling and storage

Handling:
Ensure sufficient ventilation. Avoid dust formation. Wear personal protective equipment.

Storage: Keep only in the original container. Keep container tightly closed in a well-ventilated

Transport information

Land transport (ADR/RID)

UN number:
Not classified as hazardous for transport
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not classified as hazardous for transport
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not classified as hazardous for transport
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not classified as hazardous for transport
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure control:
Provide adequate ventilation.
In case of dust being formed, provide for adequate extraction.

Personal protection:
Personal protective equipment, such as suitable disposable clothes with long sleeves, apposite gloves, safety goggles, safety shoes and half mask/face mask (all used masks are EC certified), should be worn in the event of accident or for cleaning/maintenance procedures.

Smoking, eating and drinking should be prohibited in the application area.
Wash hands before breaks and at the end of workday.

Stability and reactivity

Stability:
Stable under recomanded storage conditions.

Incompatibilities:
Strong oxidizing agents, strong bases and strong acids.

Condition to avoid:
Eliminate ignition sources.

Hazardous decomposition products:
Thermal decomposition and burning may produce carbon monoxide (CO), nitrogen oxides (NOx) and other toxic gases and vapours.

Disposal considerations

Waste disposal: The generation of waste should be avoided or minimized wherever possible. Contain spilled material, and prevent runoff and contactwith soil, waterways, drains or sewers. Disposal of this product, solutions and any by-products should comply at all times with the requirements of environmental protection and waste disposal legislation and any regional and local authority requirements.