Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

General advice:

Remove contaminated clothing.

If inhaled:

Take the person into the fresh air and keep him warm, let him rest; if there is difficulty in breathing, medical advice is required.

In case of skin contact:

In case of skin contact wash affected areas thoroughly with soap and plenty of water. Consult a doctor in the event of a skin reaction.

In case of eye contact:

Hold the eyes open and rinse with preferably lukewarm water for a sufficiently long period of time (at least 10 minutes). Contact an ophthalmologist.

If swallowed:

DO NOT induce the patient to vomit, medical advice is required.

Most important symptoms and effects, both acute and delayed

Notes to physician: Basic first aid, decontamination, symptomatic treatment.

Indication of any immediate medical attention and special treatment needed

Therapeutic measures: No information available.

Fire-fighting measures

Suitable extinguishing media:

Carbon dioxide (CO2), Foam, extinguishing powder, in cases of larger fires, water spray should be used.

Unsuitable extinguishing media:

High volume water jet

Special hazards arising from the substance or mixture:

Burning releases carbon monoxide, carbon dioxide, oxides of nitrogen and traces of hydrogen cyanide. In the event of fire and/or explosion do not breathe fumes.

Advice for fire-fighters:

Firemen must wear self-contained breathing apparatus.

Do not allow contaminated extinguishing water to enter the soil, ground-water or surface waters.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:

Put on protective equipment. Ensure adequate ventilation/exhaust extraction. Keep unauthorized persons away.

Environment related measures:

Do not allow to escape into waterways, wastewater or soil.

Methods and material for containment and cleaning up:

Take up with absorbent for chemicals or, if necessary with dry sand and store in closed containers.

Handling and storage

Precautions for safe handling

Ensure adequate ventilation and, if necessary, exhaust ventilation when handling or transferring the product.

The precautions required in the handling of acrylic acid esters must be taken.

The personal protective measures described in section 8 must be observed. Avoid contact with skin and eyes absolutely.

Keep away from foodstuffs, drinks and tobacco. Wash hands before breaks and at end of work and use skin-protecting ointment. Keep working clothes separately. Change contaminated or soaked clothing immediately.

Conditions for safe storage, including any incompatibilities

Keep container dry and tightly closed in a cool and well ventilated place. Further information on the storage conditions which must be observed to preserve quality can be found in our product information sheet.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Respiratory protection

Respiratory protection required in insufficiently ventilated working areas and during spraying. An air-fed mask, or for short periods of work, a combination of charcoal filter and particulate filter is recommended.

Persons who suffer from skin complaints or other hypersensitivity reactions of skin should not work with the product.

Hand protection

Suitable materials for safety gloves; EN 374:

Butyl rubber - IIR: thickness >=0,5mm; breakthrough time >=60min.

Recommendation: contaminated gloves should be disposed of.

Unsuitable materials for protective gloves; EN 374:

Nitrile rubber - NBR (>= 0.35 mm)

Fluorinated rubber - FKM (>= 0,4 mm)

Polyvinyl chloride - PVC (>= 0.5 mm)

Polychloroprene - CR: thickness >=0,5mm

Natural rubber - NR: thickness >=0,5mm

Eye protection

Wear eye/face protection.

Skin and body protection

Wear suitable protective clothing.

Stability and reactivity


This information is not available.

Chemical stability

This information is not available.

Possibility of hazardous reactions

In case of heating risk of exothermic polymerisation. Strong exothermic reactions with peroxides may occur in presence of heavy metal ions.

Conditions to avoid

This information is not available.

Incompatible materials

This information is not available.

Hazardous decomposition products

No hazardous decomposition products when stored and handled correctly.

Disposal considerations

Dispose in accordance with applicable international, national and local laws, ordinances and statutes. For disposal within the EC, the appropriate code according to the European Waste Catalogue (EWC) should be used.

Waste treatment methods

After containers have been emptied as thoroughly as possible (e.g. by pouring, scraping or draining until "drip-dry"), they can be sent to an appropriate collection point set up within the framework of the existing take-back scheme of the chemical industry. Containers must be recycled in compliance with national legislation and environmental regulations.

None disposal into waste water.