Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 614-970-3 | CAS number: 69444-47-9
Density
Administrative data
Link to relevant study record(s)
- Endpoint:
- density, other
- Remarks:
- density
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2018
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 109 (Density of Liquids and Solids)
- Version / remarks:
- 2012
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.3 (Relative Density)
- Version / remarks:
- 2008
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EPA OPPTS 830.7300 (Density / Relative Density / Bulk Density)
- Version / remarks:
- 2002
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Remarks:
- signed 2017-02-28
- Type of method:
- air comparison pycnometer (for solids)
- Specific details on test material used for the study:
- Storage conditions: Room temperature in original container and tightly closed
- Dynamic viscosity of test material:
- not applicable test item is a solid
- Type:
- density
- Density:
- 1.165 g/cm³
- Remarks on result:
- other: relative density D4/20 = 1.165
- Conclusions:
- According to OECD Test Guideline 109 (2012), Regulation EC No. 440/2008 Method A.3. and OCSPP Test Guideline 830.7300 (2002), the relative density D4/20 of the test item triethylmethylammonium tetrafluoroborate at 20 °C ± 0.01 °C (compared to water at 4 °C) is D4/20 = 1.165.
Reference
Two tests with different amounts of the test item were performed to determine the relative density D420 at a temperature of 20 °C ± 0.01 °C.
Results of the measurement of the density of the test item
| Test No. | Temperature [°C] | Amount of test item [g] | Average sample volume [cm³] | Density [g/cm³]* |
| 1 | 20 | |||
| 2 | 20 |
* The pressurizing-expansion cycles are performed until 4 subsequent volume measurements have a relative standard deviation (RSD) of ≤ 0.2 %.
The mean density of the test item at 20 °C is 1.165 ± < XX g/cm³ (RSD = X%). The relative density D420 is calculated by dividing the density of the test item by the density of water at 4 °C (0.9999750 g/cm³).
The relative density is D420= 1.165.
Description of key information
According to OECD Test Guideline 109 (2012), Regulation EC No. 440/2008 Method A.3. and OCSPP Test Guideline 830.7300 (2002), the relative density D420 of the test item triethylmethylammonium tetrafluoroborate at 20 °C ± 0.01 °C (compared to water at 4 °C) is D420 = 1.165.
Key value for chemical safety assessment
- Relative density at 20C:
- 1.165
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
