Registration Dossier

Administrative data

First-aid measures

Description of first aid measures:
Symptoms of poisoning may appear several hours later.
If you feel unwell, seek medical advice (show the label where possible).
Remove contaminated or saturated clothing immediately and dispose of safely.

Inhalation:
Provide fresh air, seek medical advice if necessary.

Skin contact:
Wash off with soap and water.

Eye contact:
Rinse immediately with plenty of water for 15 minutes and seek advice of an eye specialist.

Ingestion:
Flush mouth immediately, then drink plenty of water, avoid vomiting, consult physician

Most important symptoms and effects, both acute and delayed:
Symptoms:
Sensitisation
Mutagenic effects
Symptoms of poisoning may not appear for several hours. Keep under medical supervision for at least 48 hours.

Hazards:
Mutagenic effects
Toxic by inhalation.

Indication of any immediate medical attention and special treatment needed:
Treatment of symptoms.

Fire-fighting measures

Extinguishing media:
Suitable extinguishing media:
Water spray, foam, CO2, dry powder.

Unsuitable extinguishing media:
Do not use a solid water stream as it may scatter and spread fire.

Special hazards arising from the substance or mixture:
May be released in case of fire: carbon monoxide, carbon dioxide, nitric oxides.

Advice for firefighters:
Contaminated extinguishing water must be treated at a suitable disposal plant in accordance with waste management laws.
Water used to extinguish fire should not enter drainage systems, soil or stretches of water.
In case of fire, remove the endangered barrels and bring to a safe place, if this can be done safely.
Keep out unprotected persons.
Wear a self contained respiratory apparatus
Full protective suit

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Keep unauthorized persons away.
Avoid dust formation.

Environmental precautions:
Prevent substance from entering soil, natural bodies of water and sewer systems.
If the product contaminates rivers and lakes or drains inform respective authorities.
Observe regulations on prevention of water pollution (check, dam up, cover up).

Methods and material for containment and cleaning up:
Pick up mechanically. Collect in suitable containers.
Avoid dust formation.
To absorb spilled substance an approved industrial vacuum cleaner is recommended. If necessary, the spilled substance should be moistened.
Pack and label wastes like the pure substance. Do not detach label from the delivery containers prior to disposal.
Disposal according to local authority regulations.
Clean contaminated surface thoroughly.
Avoid excessive dust generation.

Handling and storage

Precautions for safe handling:
Handle and open container with care.
Refill and handle product only in closed system.
Avoid dust formation.
Provide sufficient ventilation and exhaust at the workplace.
Avoid residues of the product on the containers.

Conditions for safe storage, including any incompatibilities:
Advice on protection against fire and explosion.
Keep away from combustion sources such as sparks, flames and unprotected light sources.
When using do not smoke.
Take precautionary measures against static charges, keep away from sources of ignition.

Storage:
Store in original container.
Keep containers tightly closed in a dry, cool and well-ventilated place.

Further information:
In order to ensure due transportation, make certain that stacks are of the correct height, containers are securely fastened so as not to fall off, and labelled according to the regulations.

German storage class:
6.1D - Non-combustible, acute toxic Cat.3 / toxic hazardous materials or hazardous materials causing chronic effects

Specific end use(s):
see exposure controls/personal protection.

Transport information

Land transport (ADR/RID)

UN number:
2811
Proper shipping name and description:
TOXIC SOLID, ORGANIC, N.O.S. (Bismaleinimidresin C 183, 4,4'-Bismaleimidodiphenylmethane)
Chemical name:
Bismaleinimidresin C 183, 4,4'-Bismaleimidodiphenylmethane
Language:
English
Class:
6.1
Classification code:
T2
Packaging group:
4
Labels:
6.1
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
2811
Proper shipping name and description:
TOXIC SOLID, ORGANIC, N.O.S. (Bismaleinimidresin C 183, 4,4'-Bismaleimidodiphenylmethane)
Chemical name:
Bismaleinimidresin C 183, 4,4'-Bismaleimidodiphenylmethane
Language:
English
Class:
6.1
Classification code:
T2
Packaging group:
4
Labels:
6.1
Remarksopen allclose all

Marine transport (IMDG)

UN number:
2811
Proper shipping name and description:
TOXIC SOLID, ORGANIC, N.O.S. (Bismaleinimidresin C 183, 4,4'-Bismaleimidodiphenylmethane)
Chemical name:
Bismaleinimidresin C 183, 4,4'-Bismaleimidodiphenylmethane
Class:
6.1
Packaging group:
4
EmS code:
F-A, S-A
Labels:
6.1
Marine pollutant
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
2811
Proper shipping name and description:
TOXIC SOLID, ORGANIC, N.O.S. (Bismaleinimidresin C 183, 4,4'-Bismaleimidodiphenylmethane)
Chemical name:
Bismaleinimidresin C 183, 4,4'-Bismaleimidodiphenylmethane
Class:
6.1
Packaging group:
4
Labels:
6.1
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Personal protective equipment:
Respiratory protection:
When handling for a short time:
Respirator with P3 particle filter
In the event of prolonged exposure during handling:
In the case of respirable dust, use self-contained breathing apparatus.
Note time limit for wearing respiratory protective equipment.

Hand protection:
Applies to handling for brief periods or of small amounts:
Glove material: Nitrile, for example, Dermatril 740, Kächele-Cama Latex GmbH (KCL), Germany
Material thickness: 0.11 mm
Method: DIN EN 374
Applies to handling for longer periods or of large amounts:
Glove material: Nitrile/Chloroprene, for example, Nitopren 717, Kächele-Cama Latex GmbH (KCL), Germany
Material thickness: 0.65 mm
Method: DIN EN 374
Selection of protective gloves to meet the requirements of specific workplaces.
Suitability for specific workplaces should be clarified with protective glove manufacturers.
The information is based on our own tests, references from the literature and information from glove manufacturers, or derived by analogy with similar materials.
Remember that the useful time per day of a chemical protection glove may be much shorter than the permeation time determined according to EN 374 due to the many different influential factors involved (e.g. temperature).

Eye protection:
Safety glasses with side-shields conforming to EN166
or
When handling larger quantities: basket-shaped glasses

Hygiene measures:
Do not eat, drink, smoke, or sniff while at work. Wash your hands and/or face before breaks and before termination of work.
Remove immediately all contaminated clothing.
Prevent the formation of dust.
Provide adequate ventilation.
Preventive skin protection is recommended.
Avoid contact with skin, eyes, and clothing.

Protective measures:
Handle in accordance with good industrial hygiene and safety practice.
Avoid contact with skin, eyes and clothing.
If there is the possibility of skin/eye contact, the indicated hand/eye/body protection should be used.
The personal protective equipment used must meet the requirements of directive 89/686/EEC and amendments (CE certification).
It should be defined in the work place in the form of a risk analysis according to directive 89/686/EEC and amendments.

Stability and reactivity

Reactivity:
No further information available

Chemical stability:
No further information available

Possibility of hazardous reactions:
Possibility of hazardous reactions: No dangerous reaction known under conditions of normal use.

Conditions to avoid:
No further information available

Incompatible materials:
No further information available

Hazardous decomposition products:
No further information available

Disposal considerations

Waste treatment methods:
Product:
Disposal according to local authority regulations.
Pack and label wastes like the pure substance. Do not detach label from the delivery containers prior to disposal.

Uncleaned packaging:
Do not reuse empty containers and dispose of in accordance with the regulations issued by the appropriate local authorities.

Waste Key Number:
The waste key number must be determined as per the European Waste Types List (decision on EU Waste Types List 2000/532/EC) in cooperation with the disposal firm / producing firm / official authority.