Registration Dossier

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
flammable solids
Type of information:
experimental study
Adequacy of study:
key study
Study period:
July 2016 - December 2016
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Remarks:
Study is well documented and performed in line with standard guidelines. Study done to GLP.
Qualifier:
according to
Guideline:
EU Method A.10 (Flammability (Solids))
Deviations:
no
GLP compliance:
yes (incl. certificate)
Specific details on test material used for the study:
Identification: Resin acids and Rosin acids, maleated, esters with glycerol
Appearance/Physical state: Yellow solid
Batch: 168000
Purity: 100%
Expiry date: 01 March 2017
Storage conditions: Approximately 4 °C in the dark
Key result
Test procedure:
burning rate test: preliminary screening test
Burning time:
> 2 min
Remarks on result:
substance does not ignite and propagate combustion either by burning with flame or smouldering along 200 mm of the powder train within the 2 minutes test period
Interpretation of results:
not classified based on GHS criteria
Conclusions:
The pile failed to ignite during the 2 minutes that the Bunsen flame was applied. The test item has been determined to be not highly flammable as it failed to ignite in the preliminary screening test.
Executive summary:

The flammability of ester of maleated rosin with glycerol was determined according to EU method A.10. The flammability (solids) was determined by measuring the burning rate of test item prepared as a pile of set dimensions.The pile failed to ignite during the 2 minutes that the Bunsen flame was applied. The test item has been determined to be not highly flammable as it failed to ignite in the preliminary screening test.

Description of key information

The flammability of ester of maleated rosin with glycerol was determined according to EU method A.10. The flammability (solids) was determined by measuring the burning rate of test item prepared as a pile of set dimensions.The pile failed to ignite during the 2 minutes that the Bunsen flame was applied. The test item has been determined to be not highly flammable as it failed to ignite in the preliminary screening test.

Key value for chemical safety assessment

Flammability:
not classified

Additional information

Justification for classification or non-classification