Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

Link to relevant study record(s)

Description of key information

In the skin permeability study for dimethylbis(octadecyloxy)silane, conducted according to a draft OECD Test Guideline, and in compliance with GLP, no skin penetration of the test substance was observed.  

Key value for chemical safety assessment

Additional information

The test item dimethylbis(octadecyloxy)silane was assessed for its potential to permeate porcine skin. The test item was tested at a concentration of 3 mg/ml suspended in ethanol/water (40% v/v).

Each donor chamber was filled with 1 ml of the test item suspended in ethanol/water (40% v/v). The same solvent was slowly pumped through the acceptor chambers with a flow rate of 1 to 2 ml per hour. The liquid leaving the acceptor chambers was collected and the fractions were

changed following the schedule below:

Experiments I and Il: 0; 0.5; l, 2; 4; 6; 8; and 24 hours following the application of the test item.

The conductivity across the skin samples of each chamber was measured at the same intervals. The blank samples (at 0 hours) were collected immediately prior to filling the donor chambers

at the maximal flow rate of the pumps. Air bubbles were observed in all of the acceptor chambers after 24 hours possibly blocking

some of the skin area. However, since the conductivity across the skin was hardly affected even after 24 hours, it was judged that the air bubbles did not have any relevant effect on the skin penetration. The samples were analysed by atom absorption spectroscopy.

No reproducible permeation of the skin occurred at any time point within the time frame of the experiments.

In conclusion, it can be stated that during the described permeability test and under the experimental conditions reported, the test item did not penetrate the skin.