Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures
After inhalation: fresh air. Consult doctor if feeling unwell.
After skin contact: wash off with plenty of water. Remove contaminated clothing.
After eye contact: rinse out with plenty of water with the eyelid held wide open. Call in ophthalmologist if necessary.
After swallowing: immediately make victim drink water (two glasses at most). Consult a physician.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media
Water, Carbon dioxide (CO2), Foam, Dry powder
Unsuitable extinguishing media
For this substance/mixture no limitations of extinguishing agents are given.

Special hazards arising from the substance or mixture
Combustible material, Vapours are heavier than air and may spread along floors.
Development of hazardous combustion gases or vapours possible in the event of fire.

Advice for firefighters
Special protective equipment for firefighters
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Further information
Prevent fire extinguishing water from contaminating surface water or the ground water system.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Advice for non-emergency personnel: Avoid substance contact. Avoid inhalation of dusts. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.

Environmental precautions
Do not empty into drains.

Methods and materials for containment and cleaning up
Cover drains. Collect, bind, and pump off spills.
Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts.

Handling and storage

Precautions for safe handling
Advice on safe handling
Observe label precautions.
Hygiene measures
Change contaminated clothing. Preventive skin protection recommended. Wash hands after working with substance.

Conditions for safe storage, including any incompatibilities
Storage conditions
Tightly closed. Dry.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
UN 3077
Shipping information
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (4'-BUTYL-1,1'-BICYCLOHEXYL-4-ON)
Chemical name:
4'-BUTYL-1,1'-BICYCLOHEXYL-4-ON
Language:
English
Labels:
9
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
UN 3077
Shipping information
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (4'-BUTYL-1,1'-BICYCLOHEXYL-4-ON)
Chemical name:
4'-BUTYL-1,1'-BICYCLOHEXYL-4-ON
Language:
English
Labels:
9
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
UN 3077
Shipping information
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (4'-BUTYL-1,1'-BICYCLOHEXYL-4-ON)
Chemical name:
4'-BUTYL-1,1'-BICYCLOHEXYL-4-ON
Labels:
9
Marine pollutant
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
UN 3077
Shipping information
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (4'-BUTYL-1,1'-BICYCLOHEXYL-4-ON)
Chemical name:
4'-BUTYL-1,1'-BICYCLOHEXYL-4-ON
Labels:
9
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls
Engineering measures
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment.

Individual protection measures
Protective clothing needs to be selected specifically for the workplace, depending on concentrations and quantities of the hazardous substances handled. The chemical resistance of the protective equipment should be enquired at the respective supplier.
Eye/face protection
Safety glasses
Hand protection
full contact:
Glove material:
Nitrile rubber
Glove thickness:
0,11 mm
Break through time:
> 480 min
splash contact:
Glove material:
Nitrile rubber
Glove thickness:
0,11 mm
Break through time:
> 480 min

Other protective equipment
protective clothing
Respiratory protection
required when dusts are generated.
Recommended Filter type: Filter P 1 (acc. to DIN 3181) for solid particles of inert substances
The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Environmental exposure controls
Do not empty into drains.

Stability and reactivity

Reactivity
The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed.

Chemical stability
The product is chemically stable under standard ambient conditions (room temperature) .

Possibility of hazardous reactions
Strong oxidizing agents

Disposal considerations

The substance should be disposed of in accordance with the national regulations.