Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Move affected person to fresh air. Seek medical attention.
Emergency measure - Eyes: Immediately flush eyes with large amounts of water for at
least 15 minutes. If symptoms persist, seek medical
attention.
Emergency measure - Skin: Wash affected area with plenty of soap and water. Do not
use organic solvent. If symptoms persist, seek medical
attention.
Emergency measure - Ingestion: Rinse out mouth with water. Seek medical attention.

Fire-fighting measures

Recommended extinguishing agent: Carbon dioxide, dry chemical powder, alcohol or polymer foam
extinguishers may be used.

Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg carbon, nitrogen and
sulphur oxides and molybdenum containing compounds).

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.


Wear appropriate personal protective equipment conforming to
the relevant national or international standards as
mentioned in section 2.3.10.


Absorb spillages with a suitable inert material (eg sand or
soil). Carefully transfer the spillage to waste containers,
or use a sealed industrial vacuum machine. Containers filled
with waste material must be labelled in the same way as the
original containers.


Clean the spillage area with water and detergent.


Dispose of waste material by incineration in accordance with
local regulations.


Do not discharge to drain.

Handling and storage

Handling: The substance should be stored, handled and used in
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure by
ingestion or skin contact.


Local exhaust ventilation controls are necessary to reduce
exposure to the substance.


When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipment should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard EN374

Chemical resistant clothing to Standard EN368

Eye protection to Standard EN166


When necessary appropriate respiratory protection should be
used. e.g. a dust mask conforming to EN149 FFP1 or a vapour
mask conforming to EN405 FFA1.


The standards mentioned above should be regarded as a
minimum.

Storage: Store in a cool, dry, well-ventilated area, away from bright
light.


Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: 200l Steel drums.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport: Containers should be transported upright and secured against
falling down. Containers should be labelled and tightly
sealed.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported

Chemical reaction with water: None reported

Dust explosion: None anticipated as the substance is a paste.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Recovery from minor spillages or accidental discharge is not
economically or technically feasible, and such waste
material should be disposed of by incineration. In
principle, it may be possible to recover larger spillages of
uncontaminated material for subsequent use.

Industry - Possibility of neutralisation: No chemical treatment is practicable to neutralize the
hazardous properties.

Industry - Possibility of destruction: controlled discharge: Not recommended.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg carbon,
nitrogen, sulphur oxides and molybdenum containing
compounds) could be formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment.

Industry - Possibility of destruction - other: None.

Public at large - Possibility of recovery/recycling: Not practical as although the substance is available to the
general public it will be in very small quantities
(typically 0.1%) in the final engine oil products.

Public at large - Possibility of neutralisation: Not applicable as quantities available to the general public
will be typically less than 0.1% in engine oil products.

Public at large - Possibility of destruction: controlled discharge: Not recommended.

Public at large - Possibility of destruction - incineration: Used engine oil may be disposed of via incineration. Stack
gases should be scrubbed.

Public at large - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment.

Public at large - Possibility of destruction - others: None.