Registration Dossier

Administrative data

First-aid measures

1. Description of first aid measures

General information

Remove soiled or soaked clothing immediately

After inhalation:
When inhaled remove to fresh air and seek medical aid.

After contact with skin:
In case of contact with skin wash off immediately with soap and water

After contact with eyes:
In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice

After ingestion:
Summon a doctor immediately.

2. Most important symptoms and effects, both acute and delayed

No symptoms known currently.

No hazards known at this time.

3. Indication of any immediate medical attention and special treatment needed

Treat symptomatically.

Fire-fighting measures

1. Extinguishing media

Suitable extinguishing media:
water spray jet
alcohol-resistant foam
carbon dioxide
dry powder

2. Special hazards arising from the substance or mixture

In case of fires, hazardous combustion gases are formed:
Nitrous gases (NOx)

3. Advice for firefighters

Special protective equipment for firefighting:
Use self-contained breathing apparatus

Accidental release measures

1. Personal precautions, protective equipment and emergency procedures

Wear suitable personal protective equipment.

2. Environmental precautions

Do not allow to enter drains or waterways

3. Methods and material for containment and cleaning up

Take up with absorbent material (eg sand, kieselguhr, universal binder)

4. Reference to other sections

Additional information:
Information regarding Handling and storage
Information regarding personal protective measures
Information regarding Waste Disposal

Handling and storage

1. Precautions for safe handling

Advice on safe handling:
Open and handle container with care.

Hygiene measures:
Wash hands before breaks and after work.
Use barrier skin cream.
Remove soiled or soaked clothing immediately and clean thoroughly before using again.

Advice on protection against fire and explosion:
Observe the general rules of industrial fire protection

2. Conditions for safe storage, including any incompatibilities

Advice on storage compatibility:
Do not store with acids

Further information on storage conditions:
- sensitive to frost - In case of the product becoming opaque, thickening or being frozen due
to the effects of cold, allow to thaw slowly at room temperature. Stir briefly before use.

3. Specific end use(s)

No further recommendations.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
not restricted
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
not restricted
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
not restricted
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
not restricted
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

1.Exposure controls

General protective measures:
Avoid contact with eyes and skin

1.1 Hand protection:

a) For long-term exposure:
Butyl rubber gloves
Minimum breakthrough time / gloves : 480 min
Minimum thickness / gloves 0,7 mm

b) For short-term exposure (splash protection):
Nitrile rubber gloves.
Minimum breakthrough time / gloves : 30 min
Minimum thickness / gloves 0,4 mm
These types of protective gloves are offered by various
manufacturers. Please note the manufacturers´ detailed
statements, especially about the minimum thickness and the
minimum breakthrough time. Consider also the particular
working conditions under which the gloves are being used.

1.2 Eye protection : safety glasses

1.3 Body protection : protective clothing

Stability and reactivity

1. Reactivity
see section 3. "Possibility of hazardous reactions"

2. Chemical stability
Under normal conditions the product is stable.

3. Possibility of hazardous reactions
Reactions with acids.

4. Conditions to avoid
Acidic materials.

5. Incompatible materials
not known

6. Hazardous decomposition products
When handled and stored appropriately, no dangerous decomposition products are known

Disposal considerations

1. Waste treatment methods

In accordance with local authority regulations, take to special waste incineration plant

Uncleaned packaging:
Packaging that cannot be cleaned should be disposed of as product waste