Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

General instructions       Warning ! Flammable liquid

IN CASE OF HEAVY OR PERSISTENT DISTURBANCES, CALL A DOCTOR OR SEEK MEDICAL ADVICE URGENTLY

Route of exposure

Inhalation

Remove victim to fresh air and keep at rest in a position comfortable for breathing.

seek medical advice immediately.

if necessary, give oxygen

Check for possible heart rate problems

if breathing has stopped: administer artificial respiration.

Keep under medical surveillance

Skin contact

Take off immediately all contaminated clothing

after contact with skin, wash immediately with plenty of water, for at least 15 minutes.

in case of serious contamination, seek immediate hospital treatment

Eye contact

Do not wear contact lenses in any work area.

flush immediately with plenty of water, holding the eyelids open ( >15' )

Get medical advice (ophthalmologist)

Ingestion

give nothing to drink and do not induce vomiting (risk of pulmonary aspiration).

Risk of serious damage if inhaled into lungs, (caused e.g by vomiting), seek medical advice urgently.

If swallowed, rinse mouth with water (only if the person is conscious)

Protective equipment for first-aiders

if exposure is likely to exceed the occupational exposure limit, in a ventilated space, use an approved respiratory protective equipment; in confined space, use a autonomous breathing apparatus.

Indication of any  medical attention       no information available

Fire-fighting measures

Technical measures

call the safety and environment service immediately.

evacuate non-essential personnel

use fine spray or fog to control fire by preventing its spread and absorbing some of its heat.

keep tankage cool by continuous spraying with water (for non cryogenic storage).

Extinguishing media       

Suitable

for minor fires : carbon dioxide (CO2) or powder

for more extensive fires : foam. water spray (mist) to cool the surfaces exposed to the fire.

Not to be used

do not use water jets (stick jets) for extinguishing fire since they could help to spread the flames

Special peril

complete combustion, with an excess of oxygen forms: carbon dioxide (CO2), water vapour , NOx.

partial combustion forms also: carbon monoxide (CO), soot and cracked products: aldehydes, ketones , carbon , polycyclic aromatic hydrocarbons (PCA or PAH) , etc...

Special exposure hazards

the vapour is heavier than air and explosive mixtures can accumulate in low spots: it may be ignited at some distance away from the spill resulting in flashbacks.

fire may cause pressure rise with risk of bursting and subsequent explosion

spreading of fire- and explosion hazard by liquid layers on the water surface

Protective equipment for firefighters

wear suitable breathing equipment, in case of risk of exposure to vapour or fumes.

protective clothing, goggles and self-contained breathing equipment should be made available for firemen.

Accidental release measures

Personal precautions       

For non-emergency personnel

according to exposure conditions, wear suitable:

industrial gloves

goggles/spectacles

breathing apparatus

Avoid contact with skin and eyes and inhalation.

For emergency responders

wear suitable breathing equipment, in case of risk of exposure to vapour or fumes.

Environmental precautions

installations must be designed to avoid accidental spill on soil and water.

avoid discharge of the material in a stream or a sewerage system or cause ground contamination.

After spillage / leakage

call the safety and environment service immediately.

evacuate non-essential personnel

stop the spill at source if possible, without endangering the operator.

the vapour is heavier than air and explosive mixtures can accumulate in low spots: it may be ignited at some distance away from the spill resulting in flashbacks.

avoid proximity or contact with hot surfaces, flames, electrostatic charges or sparks.

no smoking

maintain the level of gases under the explosion limits by artificial aeration.

on soil

soil recovery by physical means.

never use dispersant.

take up small spills with dry chemical absorbent.

absorb product with an adequate material such as paper, rags, sawdust,...

dispose safely in accordance with local or national regulations.

dispose to an hazardous or special waste collection point.

on water

use floating absorbent material to be removed mechanically.

if the material has been discharged into a stream or a sewerage system, inform the authorities of the possible presence of floating materials.

dispose safely in accordance with local or national regulations.

Handling and storage

Important       refer to any national measures that may be relevant.

HANDLING

handle under adequate ventilation

In use, may form flammable / explosive vapour-air mixture.

avoid producing or diffusing fumes, vapour or spray into the air. (particulary during loading or unloading product)

the vapour is heavier than air and explosive mixtures can accumulate in low spots: it may be ignited at some distance away from the spill resulting in flashbacks.

all possible sources of ignition must be removed.

avoid proximity or contact with hot surfaces, flames, electrostatic charges or sparks.

where exposure is likely, protective clothing must be worn including gloves

use suitable anti-static safety shoes and  protective clothing

shower and eye fountain available.

When using, do not eat, drink or smoke.

Technical measures

cleaning, inspection and maintenance of storage tanks requires the implementation of strict procedures

working has to be made only on cold, degassed and ventilated storage tanks. (risk of explosive atmosphere)

take precautionary measures against static discharge during blending and transfer operations.

use explosion proof electrical equipment

all conductive materials must be electrically earthed.

Do not use air for transfers

STOCKAGE

use only containers, joints, pipes, etc...made in a material suitable for use with aromatic hydrocarbons.

store away from heating source.  avoid static electricity build up with connection to earth.

Keep away from sources of ignition - No smoking.

keep in a well-ventilated place.

keep container tightly closed.

Retain in the original container; if other containers are used: transfer, if necessary, all labelling information to the new container

can form explosive mixture with air particularly in empty uncleaned receptacles

installations must be designed to avoid any propagation of burning slick.

provide a retention storage tank

spreading of fire- and explosion hazard by liquid layers on the water surface

according to local regulations.

Incompatible materials

avoid contact with strong oxidizing materials, acids and bases , halogens (Fluorine, Chlorine, Bromine, Iodine)

container

Suitable       stainless steel

SPECIFIC USE(S)       Restricted to professional users

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
1268
Shipping information
Proper shipping name and description:
PETROLEUM DISTILLATES, N.O.S. (Benzene, Toluene, n-Hexane)
Chemical name:
aromatic hydrocarbons, C6-8, naphta-raffinate pyrolyzate-derived
Language:
English
Labels:
3
Special provisions / remarks
Remarks:
Hazard identification number: 33
Tunnel code: D/E

Inland waterway transport (UN RTDG/ADN(R))

UN number:
1268
Shipping information
Proper shipping name and description:
PETROLEUM DISTILLATES, N.O.S. (Benzene, Toluene, n-Hexane)
Chemical name:
aromatic hydrocarbons, C6-8, naphta-raffinate pyrolyzate-derived
Language:
English
Labels:
3
Special provisions / remarks
Remarks:
Hazards: (3+N2+CMR)

Marine transport (UN RTDG/IMDG)

UN number:
1268
Shipping information
Proper shipping name and description:
PETROLEUM DISTILLATES, N.O.S. (Benzene, Toluene, n-Hexane)
Chemical name:
aromatic hydrocarbons, C6-8, naphta-raffinate pyrolyzate-derived
Labels:
3
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
1268
Shipping information
Proper shipping name and description:
PETROLEUM DISTILLATES, N.O.S. (Benzene, Toluene, n-Hexane)
Chemical name:
aromatic hydrocarbons, C6-8, naphta-raffinate pyrolyzate-derived
Labels:
Class 3 - Flammable liquid
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls       refer to any national measures that may be relevant.

OCCUPATIONAL EXPOSURE LIMIT

Benzene:  

UK: HSE EH40/2005:

Long-term exposure limit (8-hour TWA reference period) : 1 ppm

IRL(2002): OEL (8h): 1 ppm - 3 mg/m³

EC (1999): 1 ppm - 3.25 mg/m³

US (ACGIH-2009): TLV-8h TWA: 0.5 ppm - 1.6 mg/m³ ; TLV-15 min STEL: 2.5 ppm - 8 mg/m³

Toluene:

UK: HSE EH40/2005:

Long-term exposure limit (8-hour TWA reference period) : 50 ppm - 191 mg/m³

Short-term exposure limit (15-minute reference period): 150 ppm - 574 mg/m³

IRL(2002): OEL (8h): 50 ppm - 188 mg/m³ ; (15 min): 150 ppm - 560 mg/m³

US (ACGIH-2009): TLV– 8h TWA: 20 ppm - 75 mg/m³

EC (2006): VL (8h): 50 ppm - 192 mg/m³ ; (15 min) : 100 ppm - 384 mg/m³

n-Hexane:

UK: HSE EH40/2005:

Long-term exposure limit (8-hour TWA reference period) : 20 ppm - 72 mg/m³

IRL(2002): OEL (8h): 20 ppm - 70 mg/m³

US (ACGIH-2009): TLV-8 h TWA: 50 ppm - 176 mg/m³

EC (2006): VL (8h): 20 ppm - 72 mg/m³

Gasoline (Petrol):

US (ACGIH-2009): TLV-8h TWA: 300 ppm - 890 mg/m³ ; TLV-15min STEL: 500 ppm - 1480 mg/m³

EXPOSURE CONTROLS

Appropriate engineering controls

As an isolated and transported chemical intermediate, the substance is manufactured and distributed under strictly    controlled conditions in that it is rigorously contained by technical means during its whole lifecycle (Regulation 1907/2006, Article 17 §3).

Personal protection       

                           

Respiratory protection       

local exhaust ventilation may be needed when working in a closed area; if exposure s likely to exceed the exposure limits of markers of the substance, use approved respiratory protective equipment conforming to EN 140; in confined space, use an autonomous breathing apparatus. Recommended filter type :  Type A or better

Hands protection

gloves resistant to aromatic hydrocarbons

In case of immersion:

recommended material: fluorinated polymer or polyvinyl alcohol

layer thickness : all thicknesses

penetration time according to norm EN 374-3 > 480 minutes

In case of contact with spray:

recommended material: nitrile

layer thickness > 0,45 mm

penetration time according to norm EN 374-3 > 30 minimum

Remarks:

Gloves may degrade in contact with this chemical.

• Carefully check the glove for cracks or damage before reusing it, dispose of gloves where the penetration time is exceeded.

• The penetration time depends on temperature, glove material, thickness and construction.

Penetration time is measured against EN 374 in laboratory conditions corresponding to permanent static contact and is not necessarily representative of the risk in the workplace.

Contact the gloves' supplier for further information on the selection and resistance of gloves.

Skin and body protection

shower and eye fountain available.

Eye protection

goggles/spectacles

Do not wear contact lenses in any work area.

Other personal protection

where exposure is likely, protective clothing must be worn including gloves

safety non-slip shoes in areas where spills or leaks can occur.

safety shoes (keg / gas cylinder manipulation)

Industrial health measures:

General:

handle in accordance with good industrial hygiene and safety procedures; avoid producing or diffusing fumes, vapour or spray into the air (particulary during loading or unloading product); avoid contact with skin and eyes; avoid splashes (suitable protective clothing, screen, aprons, etc...); do not wipe hands with cloths or rags which have been used for cleaning; remove all contaminated clothing and remove protective clothing when the work is completed; wash skin as soon as possible with soap and water; do not store near food products. When using, do not eat, drink or smoke.

Specific:

substance manufacture, use as intermediate, in formulation (blending) or use as fuel is made either mainly in closed process with no likelihood of exposure or in closed continuous process with occasional situations where controlled exposure can occur.  Tasks where the intervention of workers is required are performed according to the following Risk Management Measures (RMM):

•       Handled substance within a closed system (e.g. sampling collected under closed loop system) or

Ensure material transfers are under containment or extract ventilation and provide extract ventilation to points where emissions occur or

Use sophisticated forms of respiratory protection that require specialised maintenance or, at minimum, wear a mask conforming to EN140 with Type A filter or better.

The required efficiency of the RMM (e.g. efficiency of extract ventilation system) or type of RMM depends of the operational conditions. Further information can be found in the exposure scenarios.

•       Wear suitable gloves tested to EN374

•       Wear suitable eye protection (goggles/spectacles)

Specific:

transfer of the substance (charging/discharging) from or to vessels/large containers is performed at (non-)dedicated facilities. Tasks where the intervention of workers is required are performed according to the following RMM:

•       Handle substance within a closed system or

Ensure material transfers are under containment or extract ventilation and provide extract ventilation to points where emissions occur or

Use sophisticated forms of respiratory protection that require specialised maintenance or, at minimum, wear a mask conforming to EN140 with Type A filter or better.

The required efficiency of the RMM (e.g. efficiency of extract ventilation system) or type of RMM depends of the operational conditions. Further information can be found in the exposure scenarios.

•       Wear suitable gloves tested to EN374.

•       Wear suitable eye protection (goggles/spectacles)

Specific:

use of the substance in laboratory is performed at some occasions, i.e. for analyses of product samples. Tasks are performed according to the following RMM:

•       Perform the tasks indoor provided that the substance is handled in a fume cupboard or under extract ventilation. Local Exhaust Ventilation (LEV) efficiency must be at least 70 %. Higher efficiency of the LEV may be required depending of the operational conditions. Further information can be found in the exposure scenarios.

•       Wear suitable gloves tested to EN374

•       Wear suitable eye protection (goggles/spectacles)

Environmental exposure controls:

Specific:

Substance manufacture, use as an intermediate, in formulation (blending) or used as fuel is either mainly in closed process with no likelihood of exposure or in closed continuous process with occasional situations where controlled exposure can occur. The following RMM applies:

•       If sludge is generated, it should not be applied to natural soils but should be incinerated, contained or reclaimed

•       If waste of the substance is generated, external treatment and disposal of waste should comply with applicable local and/or national regulations

•       Where emission of the substance occurs:

                            •  the treatment of air emission must provide an emission removal of efficiency ranging from 0 to 95%

                            •  the treatment of waste water must provide an emission removal efficiency ranging from 85 to >95%. Treatment may be on the site of production or via a municipal sewage treatment

                            The required removal efficiency depends on the operational conditions and the tonnage of production.

                            Further information can be found in the exposure scenarios.

Stability and reactivity

REACTIVITY       

Stability

stable under normal operating conditions of storage, handling and use

the product is combustible if heated above the flash point.

Hazardous reactions

Highly flammable

CONDITIONS TO AVOID

Keep away from sources of ignition - No smoking.

avoid proximity or contact with hot surfaces, flames, electrostatic charges or sparks.

MATERIALS TO AVOID

avoid strong acids and oxidizing materials

halogens (Fluorine, Chlorine, Bromine, Iodine)

Decomposition products

complete combustion, with an excess of oxygen forms: carbon dioxide (CO2) and water vapour.

partial combustion, forms also: carbon monoxide (CO), soot and cracked products: aldehydes, ketones

Disposal considerations

Waste disposal

hazardous waste

industrial treatment by distillation

incineration

dispose in a safe manner in accordance with local/national regulations.

authorized disposal

do not dispose off this product into the environment

Disposal of contaminated packaging

empty bags may contain flammable or explosive vapour

dispose in a safe manner in accordance with local/national regulations.

authorized disposal

do not dispose off this product into the environment