Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 215-628-2 | CAS number: 1335-30-4
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
· General information: Immediately remove any clothing soiled by the product.
· After inhalation: Supply fresh air; consult a doctor in case of complaints.
· After skin contact: Generally the product does not irritate the skin. Wash with water.
· After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
· After swallowing: If symptoms persist consult doctor.
· After inhalation: Supply fresh air; consult a doctor in case of complaints.
· After skin contact: Generally the product does not irritate the skin. Wash with water.
· After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
· After swallowing: If symptoms persist consult doctor.
Fire-fighting measures
· Suitable extinguishing agents:
Use fire extinguishing methods suitable to surrounding conditions.
· Special hazards caused by the substance, its products of combustion or resulting gases:
Metal oxide fume
· Protective equipment:
Wear protective equipment.
· Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
Use fire extinguishing methods suitable to surrounding conditions.
· Special hazards caused by the substance, its products of combustion or resulting gases:
Metal oxide fume
· Protective equipment:
Wear protective equipment.
· Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
Accidental release measures
· Person-related safety precautions:
Remove person from danger area.
Wear protective equipment. Keep unprotected persons away.
Avoid formation of dust.
· Measures for environmental protection:
Do not allow to enter sewers/ surface or ground water.
Damp down dust with water spray.
· Measures for cleaning/collecting:
Sweep the spill area; avoid raising dust.
Dispose contaminated material as waste according to subsection "disposal considerations".
· Additional information:
See subsection "handling and storage" for information on safe handling.
See subsection "exposure controls/personal protection" for information on personal protection equipment.
See subsection "disposal considerations" for disposal information.
Remove person from danger area.
Wear protective equipment. Keep unprotected persons away.
Avoid formation of dust.
· Measures for environmental protection:
Do not allow to enter sewers/ surface or ground water.
Damp down dust with water spray.
· Measures for cleaning/collecting:
Sweep the spill area; avoid raising dust.
Dispose contaminated material as waste according to subsection "disposal considerations".
· Additional information:
See subsection "handling and storage" for information on safe handling.
See subsection "exposure controls/personal protection" for information on personal protection equipment.
See subsection "disposal considerations" for disposal information.
Handling and storage
· Handling:
· Information for safe handling:
Prevent formation of dust.
Keep receptacles tightly sealed.
Provide suction extractors if dust is formed.
Use appropriate industrial vacuum cleaners or central vacuum systems for dust removal.
Prevent static electric sparks.
· Information about fire - and explosion protection:
Earth container to avoid electric sparks, especially in contact with flammable substances. The product is not flammable.
· Storage:
· Requirements to be met by storerooms and receptacles:
No special requirements.
· Information about storage in one common storage facility:
Store away from foodstuffs.
· Further information about storage conditions:
Keep container tightly sealed.
Store in dry conditions. This product is hygroscopic.
· Information for safe handling:
Prevent formation of dust.
Keep receptacles tightly sealed.
Provide suction extractors if dust is formed.
Use appropriate industrial vacuum cleaners or central vacuum systems for dust removal.
Prevent static electric sparks.
· Information about fire - and explosion protection:
Earth container to avoid electric sparks, especially in contact with flammable substances. The product is not flammable.
· Storage:
· Requirements to be met by storerooms and receptacles:
No special requirements.
· Information about storage in one common storage facility:
Store away from foodstuffs.
· Further information about storage conditions:
Keep container tightly sealed.
Store in dry conditions. This product is hygroscopic.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
· Additional information about design of technical facilities: see subsection "handling and storage".
· Ingredients with limit values that require monitoring at the workplace:
AGW (ALVEO) (Germany): short-term value: 6 A mg/m³, long-term value: 3 A mg/m³, allg. Staubg.: TRGS 900 2.4, AGS
AGW (EINATEM) (Germany): short-term value: 20 E mg/m³, long-term value: 10 E mg/m³, allg. Staubg.: TRGS 900 2.4, AGS
· Additional information: Based on lists valid at date of MSDS creation.
· Personal protective equipment:
· General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals.
· Respiratory protection:
If the WEL value is exceeded.
Filter P2
· Protection of hands:
Protective gloves
Wear gloves for protection against mechanical hazards according to EN 388.
Use gloves of stable material (e.g. Nitrile) - if necessary tricoted to improve the wearability.
Check the condition of the gloves prior to each use.
Check the permeability prior to each anew use of the glove.
Preventive skin protection by use of skin-protecting agents is recommended.
After use of gloves apply skin-cleaning agents and skin cosmetics.
· Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
EN 388: Minimum requirements for efficiency level 1 for all groups.
Recommended thickness of the material: ≥ 0.35 mm
Butyl rubber, BR
Nitrile rubber, NBR
· Penetration time of glove material
EN 420: Minimum requirements for efficiency level 1 for all groups.
For the mixture of chemicals mentioned below the penetration time has to be at least 480 minutes (Permeation according to EN 374 Part 3: Level 6).
· Not suitable are gloves made of the following materials:
Strong material gloves
· Eye protection:
Safety glasses.
· Body protection:
Protective work clothing.
· Ingredients with limit values that require monitoring at the workplace:
AGW (ALVEO) (Germany): short-term value: 6 A mg/m³, long-term value: 3 A mg/m³, allg. Staubg.: TRGS 900 2.4, AGS
AGW (EINATEM) (Germany): short-term value: 20 E mg/m³, long-term value: 10 E mg/m³, allg. Staubg.: TRGS 900 2.4, AGS
· Additional information: Based on lists valid at date of MSDS creation.
· Personal protective equipment:
· General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals.
· Respiratory protection:
If the WEL value is exceeded.
Filter P2
· Protection of hands:
Protective gloves
Wear gloves for protection against mechanical hazards according to EN 388.
Use gloves of stable material (e.g. Nitrile) - if necessary tricoted to improve the wearability.
Check the condition of the gloves prior to each use.
Check the permeability prior to each anew use of the glove.
Preventive skin protection by use of skin-protecting agents is recommended.
After use of gloves apply skin-cleaning agents and skin cosmetics.
· Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
EN 388: Minimum requirements for efficiency level 1 for all groups.
Recommended thickness of the material: ≥ 0.35 mm
Butyl rubber, BR
Nitrile rubber, NBR
· Penetration time of glove material
EN 420: Minimum requirements for efficiency level 1 for all groups.
For the mixture of chemicals mentioned below the penetration time has to be at least 480 minutes (Permeation according to EN 374 Part 3: Level 6).
· Not suitable are gloves made of the following materials:
Strong material gloves
· Eye protection:
Safety glasses.
· Body protection:
Protective work clothing.
Stability and reactivity
· Thermal decomposition / conditions to be avoided:
No decomposition if used according to specifications.
· Materials to be avoided: -
. Dangerous reactions: No dangerous reactions known.
· Dangerous decomposition products: No dangerous decompositions products known.
No decomposition if used according to specifications.
· Materials to be avoided: -
. Dangerous reactions: No dangerous reactions known.
· Dangerous decomposition products: No dangerous decompositions products known.
Disposal considerations
· Product:
· Recommendation: Disposal must be made according to official regulations.
· Waste disposal key:
The disposal of the product has to be carried out in accordance with the legal requirements. EWC waste codes are strictly industry-oriented, therefore waste classification has to be done by the waste producer.
· Uncleaned packaging: -
· Recommendation:
Disposal must be made according to official regulations.
· Recommendation: Disposal must be made according to official regulations.
· Waste disposal key:
The disposal of the product has to be carried out in accordance with the legal requirements. EWC waste codes are strictly industry-oriented, therefore waste classification has to be done by the waste producer.
· Uncleaned packaging: -
· Recommendation:
Disposal must be made according to official regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
