Registration Dossier
Registration Dossier
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 236-948-9 | CAS number: 13560-89-9
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data

Density
Administrative data
Link to relevant study record(s)
- Endpoint:
- relative density
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- March 2013
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: The data contained in this report has been generated in a laboratory holding a current statement of GLP Compliance, issued by the UK GLP Monitoring Authority, MHRA, but not as part of a formal GLP study.
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.3 (Relative Density)
- Deviations:
- no
- Principles of method if other than guideline:
- Relative Density in accordance with EU A3 Air Comparison Pycnometer Method using Helium, SOP 060.01 Issue No. 7 issued November 2011, Expires November 2013.
Instrument: Micromeritics Accupyc 1330 TC Pycnometer LIMS 1042 (PQ Done:27/02/13, PQ Due:27/05/13) - GLP compliance:
- no
- Remarks:
- The data contained in this report has been generated in a laboratory holding a current statement of GLP Compliance, issued by the UK GLP Monitoring Authority, MHRA, but not as part of a formal GLP study.
- Type of method:
- pycnometer method
- Key result
- Type:
- relative density
- Density:
- > 1.706 - < 1.713 g/cm³
- Temp.:
- 20 °C
- Remarks on result:
- other: 2 tests, 5 runs per test
- Conclusions:
- Using the AccuPyc 1330TC Pycnometer, with a water bath temperature measured at 20degC +/- 0.5degC, Dechlorane plus 25 was found to have a mean relative density of 1.71 g/cm3.
- Executive summary:
Experimental determination of the density of Dechlorane plus 25 was performed using an AccuPyc 1330TC Pycnometer in accordance with EU A3 Air Comparison Pycnometer Method using Helium. 2 tests of 5 runs each were performed using 2.2547 g and 2.5305 g of the sample. Test 1 resulted in a relative density of 1.7079 g/cm3 and Test 2 resulted in a relative density of 1.7097 g/cm3. Dechlorane plus 25 was found to have a mean relative density of 1.71 g/cm3.
- Endpoint:
- relative density
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- March 2013
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: The data contained in this report has been generated in a laboratory holding a current statement of GLP Compliance, issued by the UK GLP Monitoring Authority, MHRA, but not as part of a formal GLP study.
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.3 (Relative Density)
- Deviations:
- no
- Principles of method if other than guideline:
- Relative Density in accordance with EU A3 Air Comparison Pycnometer Method using Helium, SOP 060.01 Issue No. 7 issued November 2011, Expires November 2013.
Instrument: Micromeritics Accupyc 1330 TC Pycnometer LIMS 1042 (PQ Done:27/02/13, PQ Due:27/05/13) - GLP compliance:
- no
- Remarks:
- The data contained in this report has been generated in a laboratory holding a current statement of GLP Compliance, issued by the UK GLP Monitoring Authority, MHRA, but not as part of a formal GLP study.
- Type of method:
- pycnometer method
- Key result
- Type:
- relative density
- Density:
- > 1.727 - < 1.734 g/cm³
- Temp.:
- 20 °C
- Remarks on result:
- other: 2 tests, 5 runs per test
- Conclusions:
- Using the AccuPyc 1330TC Pycnometer, with a water bath temperature measured at 20degC +/- 0.5degC, Dechlorane plus 35 was found to have a mean relative density of 1.73 g/cm3.
- Executive summary:
Experimental determination of the density of Dechlorane plus 35 was performed using an AccuPyc 1330TC Pycnometer in accordance with EU A3 Air Comparison Pycnometer Method using Helium. 2 tests of 5 runs each were performed using 1.7560 g and 1.8613 g of the sample. Test 1 resulted in a relative density of 1.7295 g/cm3 and Test 2 resulted in a relative density of 1.7296 g/cm3. Dechlorane plus 25 was found to have a mean relative density of 1.73 g/cm3.
- Endpoint:
- relative density
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- March 2013
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: The data contained in this report has been generated in a laboratory holding a current statement of GLP Compliance, issued by the UK GLP Monitoring Authority, MHRA, but not as part of a formal GLP study.
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.3 (Relative Density)
- Deviations:
- no
- Principles of method if other than guideline:
- Relative Density in accordance with EU A3 Air Comparison Pycnometer Method using Helium, SOP 060.01 Issue No. 7 issued November 2011, Expires November 2013.
Instrument: Micromeritics Accupyc 1330 TC Pycnometer LIMS 1042 (PQ Done:27/02/13, PQ Due:27/05/13) - GLP compliance:
- no
- Remarks:
- The data contained in this report has been generated in a laboratory holding a current statement of GLP Compliance, issued by the UK GLP Monitoring Authority, MHRA, but not as part of a formal GLP study.
- Type of method:
- pycnometer method
- Key result
- Type:
- relative density
- Density:
- > 1.71 - < 1.717 g/cm³
- Temp.:
- 20 °C
- Remarks on result:
- other: 2 tests, 5 runs per test
- Conclusions:
- Using the AccuPyc 1330TC Pycnometer, with a water bath temperature measured at 20degC +/- 0.5degC, Dechlorane plus 515 was found to have a mean relative density of 1.71 g/cm3.
- Executive summary:
Experimental determination of the density of Dechlorane plus 515 was performed using an AccuPyc 1330TC Pycnometer in accordance with EU A3 Air Comparison Pycnometer Method using Helium. 2 tests of 5 runs each were performed using 3.7155 g and 4.0436 g of the sample. Test 1 resulted in a relative density of 1.7115 g/cm3 and Test 2 resulted in a relative density of 1.7164 g/cm3. Dechlorane plus 25 was found to have a mean relative density of 1.71 g/cm3.
Referenceopen allclose all
Test 1 (Wt. taken = 2.2547g)
Run |
Volume (cm3) |
Density (g/cm3) |
1 |
1.3194 |
1.7089 |
2 |
1.3220 |
1.7056 |
3 |
1.3191 |
1.7093 |
4 |
1.3212 |
1.7065 |
5 |
1.3193 |
1.7090 |
Mean |
1.3202 |
1.7079 |
Standard Deviation |
0.0013 |
0.0017 (RSD = 0.10%) |
Test 2 (Wt. taken = 2.5305g)
Run |
Volume (cm3) |
Density (g/cm3) |
1* |
1.4751 |
1.7155 |
2 |
1.4786 |
1.7115 |
3 |
1.4814 |
1.7081 |
4 |
1.4773 |
1.7129 |
5 |
1.4821 |
1.7074 |
6 |
1.4812 |
1.7084 |
Mean |
1.4801 |
1.7097 |
Standard Deviation | 0.0021 | 0.0024 (RSD = 0.14%) |
* Due to a run precision function of the instrument, the analysis stopped when 5 results are gained that have a variation of less than 0.05% of the cell volume, Run 1 was not used to calculate the mean value as it was ouside this acceptance criteria.
Test 1 (Wt. taken = 1.7560g)
Run |
Volume (cm3) |
Density (g/cm3) |
1 |
1.0139 |
1.7319 |
2 |
1.0150 |
1.7301 |
3 |
1.0154 |
1.7294 |
4 |
1.0162 |
1.7280 |
5 |
1.0163 |
1.7295 |
Mean |
1.0153 |
1.7295 |
Standard Deviation |
0.0010 |
0.0016 (RSD = 0.09%) |
Test 2 (Wt. taken = 1.8613g)
Run |
Volume (cm3) |
Density (g/cm3) |
1 |
1.0780 |
1.7267 |
2 |
1.0756 |
1.7304 |
3 |
1.0778 |
1.7269 |
4 |
1.0757 |
1.7303 |
5 |
1.0737 |
1.7336 |
Mean |
1.0762 |
1.7296 |
Standard Deviation | 0.0018 | 0.0029 (RSD = 0.17%) |
Test 1 (Wt. taken = 3.7155g)
Run |
Volume (cm3) |
Density (g/cm3) |
1 |
2.1716 |
1.7110 |
2 |
2.1702 |
1.7120 |
3 |
2.1696 |
1.7125 |
4 |
2.1698 |
1.7123 |
5 |
2.1730 |
1.7098 |
Mean |
2.1709 |
1.7115 |
Standard Deviation |
0.0014 |
0.0011 (RSD = 0.06%) |
Test 2 (Wt. taken = 4.0436g)
Run |
Volume (cm3) |
Density (g/cm3) |
1 |
2.3560 |
1.7163 |
2 |
2.3549 |
1.7171 |
3 |
2.3576 |
1.7152 |
4 |
2.3556 |
1.7166 |
5 |
2.3552 |
1.7169 |
Mean |
2.3558 |
1.7164 |
Standard Deviation | 0.0011 | 0.0008 (RSD = 0.05%) |
Description of key information
Relative Density in accordance with EU A3, Air Comparison Pycnometer Method using Helium
Key value for chemical safety assessment
- Relative density at 20C:
- 1.71
Additional information
The data contained in this report has been generated in a laboratory holding a current statement of GLP Compliance, issued by the UK GLP Monitoring Authority, MHRA, but not as part of a formal GLP study.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
