Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 245-910-0 | CAS number: 23847-08-7
Guidance on Safe Use
Administrative data
First-aid measures
Description of first aid measures
· General information:
- Take affected persons out of danger area and lay down.
- Immediately remove any clothing soiled by the product.
- In case of irregular breathing or respiratory arrest provide artificial respiration.
· After inhalation: Supply fresh air.
· After skin contact:
- Immediately rinse with water. If skin irritation continues, consult a doctor.
· After eye contact:
- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical treatment.
· After swallowing:
- Rinse out mouth and then drink plenty of water.
Most important symptoms and effects, both acute and delayed:
- No further relevant information available.
Indication of any immediate medical attention and special treatment needed
- No further relevant information available.
Fire-fighting measures
Extinguishing media
· Suitable extinguishing agents:
- CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
- Use fire extinguishing methods suitable to surrounding conditions.
· For safety reasons unsuitable extinguishing agents:
- Water with full jet
Special hazards arising from the substance or mixture
- Formation of toxic gases is possible during heating or in case of fire.
- In case of fire, the following can be released:
- Carbon monoxide
- Carbon dioxide
Advice for firefighters
· Protective equipment:
- Wear self-contained respiratory protective device.
· Additional information
- Cool endangered receptacles with water spray.
- Collect contaminated fire fighting water separately. It must not enter the sewage system.
Accidental release measures
Personal precautions, protective equipment and emergency procedures
- Ensure adequate ventilation.
- Wear protective equipment. Keep unprotected persons away.
- Avoid formation of dust.
- Keep away from ignition sources.
Environmental precautions:
- Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and cleaning up:
- Pick up mechanically.
- Dispose of the material collected according to regulations.
Handling and storage
Precautions for safe handling
- Prevent formation of dust.
- Any unavoidable deposit of dust must be regularly removed.
- Ensure good ventilation/exhaustion at the workplace.
· Information about fire and explosion protection:
- Dust can combine with air to form an explosive mixture.
- Keep ignition sources away - Do not smoke.
- Protect against electrostatic charges.
Conditions for safe storage, including any incompatibilities
·Storage:
- Requirements to be met by storerooms and receptacles: Store only in the original receptacle.
- Information about storage in one common storage facility: Store away from oxidising agents.
- Further information about storage conditions:
- Keep container tightly sealed.
- Store in cool, dry conditions in well sealed receptacles.
Specific end use(s)
- No further relevant information available.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- UN3077
Shipping information
- Proper shipping name and description:
- 3077 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (1,1'-dithiobis[hexahydro-2H-azepin-2-one])
- Chemical name:
- 1,1'-dithiobis[hexahydro-2H-azepin-2-one]
- Labels:
- 9
Special provisions / remarks
- Special provisions:
- 274, 335, 375, 601
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- UN3077
Shipping information
- Proper shipping name and description:
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (1,1'-dithiobis[hexahydro-2H-azepin-2-one])
- Chemical name:
- 1,1'-dithiobis[hexahydro-2H-azepin-2-one]
- Labels:
- 9
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- UN3077
Shipping information
- Proper shipping name and description:
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (1,1'-dithiobis[hexahydro-2H-azepin-2-one])
- Chemical name:
- 1,1'-dithiobis[hexahydro-2H-azepin-2-one]
- Labels:
- 9
- Marine pollutant
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- UN3077
Shipping information
- Proper shipping name and description:
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (1,1'-dithiobis[hexahydro-2H-azepin-2-one])
- Chemical name:
- 1,1'-dithiobis[hexahydro-2H-azepin-2-one]
- Labels:
- 9
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Control parameters
· Ingredients with limit values that require monitoring at the workplace:
- The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace.
Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
- Do not eat, drink, smoke or sniff while working.
- Keep away from foodstuffs, beverages and feed.
- Store protective clothing separately.
- Avoid contact with the eyes and skin.
- The usual precautionary measures are to be adhered to when handling chemicals.
· Respiratory protection: Not necessary if room is well-ventilated.
· Protection of hands: Protective gloves
- Only use chemical-protective gloves with CE-labelling of category III.
- The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
- Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
· Material of gloves
- The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
· Penetration time of glove material
- The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
· Eye protection: Safety glasses
· Body protection: Protective work clothing
Stability and reactivity
Reactivity: No decomposition if used and stored according to specifications.
Chemical stability: No decomposition if used and stored according to specifications.
Thermal decomposition: No No decomposition if used and stored according to specifications.
Possibility of hazardous reactions: Risk of dust explosion.
Conditions to avoid: Keep away from heat and direct sunlight.
Incompatible materials: Acids and bases.
Hazardous decomposition products: No dangerous decomposition products known.
Disposal considerations
The relevant EU Directives as well as local, regional and national regulations have to be observed. It is the responsability of the waste producer, to assign separate industrial- and process-specific waste disposal codes according to the European Waste Catalogue. In addition, it is recommended to clarify details with the corresponding waste disposer.
Disposal method: In case, where no further utalization is intended and recycling is not possible, dispose the product according to the local regulations and laws, e.g. by incineration in a suitable plant.
Contaminated packaging: Bring empty containers to an approved waste disposal plant for recycling or disposal.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
