Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Water solubility

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
water solubility
Type of information:
(Q)SAR
Adequacy of study:
supporting study
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
results derived from a valid (Q)SAR model and falling into its applicability domain, with adequate and reliable documentation / justification
Justification for type of information:
See attached QMRF/QPRF
Principles of method if other than guideline:
The result was obtained using an appropriate QSAR method (see attached QMRF and QPRF for details).

The model is an adaptation of the existing SRC model WaterNT v 1.01, aka WaterFrag, which is a component of the EPI Suite. This model is based on fragment values. That is, the chemical structure is broken down into its constituent functional groups, and the contribution of each group toward the overall solubility is calculated. Certain correction factors may also apply. Whilst this method is good in principle, it suffers from not having reliable fragment values for substances containing Si-O bonds. Therefore, multiple linear regression on a set of organosilicon compounds has been used to generate new fragment values for silicon and oxygen bound to silicon (with separate values for –OH and other oxygen). The adapted model applies to substances containing Si-O bonds.
Water solubility:
32 000 mg/L
Temp.:
20 °C
Conclusions:
A water solubility of 3.2E+04 mg/L at 20°C was obtained for the hydrolysis product using an appropriate calculation method. The result is considered reliable.

Description of key information

Water solubility [dichloro(cyclohexyl)methylsilane]: Not relevant due to very rapid hydrolysis in contact with water

Water solubility [cyclohexyl(methyl)silanediol]: above approximately 30 mg/L condensation reactions can occur over time, limiting the concentration dissolved in water. The calculated solubility is 3.2E+04 mg/L (QSAR)

Key value for chemical safety assessment

Additional information

The requirement to conduct a water solubility study for dichloro(cyclohexyl)methylsilane is waived on the basis that in contact with water, the substance hydrolyses very rapidly to form cyclohexyl(methyl)silanediol and hydrochloric acid.

The hydrolysis product, cyclohexyl(methyl)silanediol, may undergo condensation reactions in water; this become important above approximately 30 mg/L and can limit the concentration dissolved in water. For details, see the overall physicochemical properties discussion.

Cyclohexyl(methyl)silanediol is very hydrophilic and hence the calculated solubility is 3.2E+04 mg/L at 20°C using a QSAR method. This QSAR method for water solubility cannot be validated for because the saturation concentration in water is limited by condensation reactions rather than lack of true solubility, as discussed above. The prediction is considered valid for use in calculation of the environmental exposure modelling and toxicokinetics modelling because it is considered to adequately describe the hydrophilicity of the substance and hence the partitioning behaviour.