Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 947-115-0
CAS number: -
4.1. Description of first aid measures
Remove contaminated clothing.
Keep patient calm, remove to fresh air, seek medical attention. Immediately administer a
corticosteroid from a controlled/metered dose inhaler.
On skin contact:
Wash thoroughly with soap and water.
On contact with eyes:
Wash affected eyes for at least 15 minutes under running water with eyelids held open.
Rinse mouth immediately and then drink plenty of water, seek medical attention.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms: The most important known symptoms and effects are described in the labelling (see
section 2) and/or in section 11., Further important symptoms and effects are so far not known.
Hazards: No hazard is expected under intended use and appropriate handling.
4.3. Indication of any immediate medical attention and special treatment needed
Treatment: Treat according to symptoms (decontamination, vital functions), no known specific
5.1. Extinguishing media
Suitable extinguishing media:
water spray, dry powder, foam
5.2. Special hazards arising from the substance or mixture
Evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of
5.3. Advice for fire-fighters
Special protective equipment:
Wear a self-contained breathing apparatus.
Contaminated extinguishing water must be disposed of in accordance with official regulations.
6.1. Personal precautions, protective equipment and emergency procedures
Use personal protective clothing.
6.2. Environmental precautions
Contain contaminated water/firefighting water. Do not discharge into drains/surface
6.3. Methods and material for containment and cleaning up
For large amounts: Pump off product.
For residues: Pick up with suitable absorbent material. Dispose of absorbed material in accordance
7.1. Precautions for safe handling
No special measures necessary provided product is used correctly.
Protection against fire and explosion:
No special precautions necessary.
7.2. Conditions for safe storage, including any incompatibilities
Further information on storage conditions: Keep container tightly closed and in a cool place.
8.1. Control parameters
Components with occupational exposure limits
7647-14-5: Sodium chloride (NaCl)
8.2. Exposure controls
Personal protective equipment
Respiratory protection in case of vapour/aerosol release. Particle filter with medium efficiency for solid and liquid particles (e.g. EN 143 or 149, Type P2 or FFP2)
Chemical resistant protective gloves (EN 374)
Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374):
e.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), polyvinylchloride (0.7 mm) and other
Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing.
Manufacturer's directions for use should be observed because of great diversity of types.
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Body protection must be chosen based on level of activity and exposure.
General safety and hygiene measures
Handle in accordance with good industrial hygiene and safety practice. Wearing of closed work clothing is recommended. No eating, drinking, smoking or tobacco use at the place of work.
No hazardous reactions if stored and handled as prescribed/indicated.
Corrosion to metals:
Corrosive effect on: steel
10.2. Chemical stability
The product is stable if stored and handled as prescribed/indicated.
10.3. Possibility of hazardous reactions
No hazardous reactions when stored and handled according to instructions.
10.4. Conditions to avoid
No conditions to avoid anticipated.
10.5. Incompatible materials
Substances to avoid:
strong oxidizing agents, strong bases, strong acids
10.6. Hazardous decomposition products
Hazardous decomposition products:
No hazardous decomposition products if stored and handled as prescribed/indicated.
13.1. Waste treatment methods
Must be disposed of or incinerated in accordance with local regulations.
Uncontaminated packaging can be re-used.
Packs that cannot be cleaned should be disposed of in the same manner as the contents.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again