Bis(neodecanoyloxy)dioctylstannane

Guidance on Safe Use

First-aid measures

· 4.1 Description of first aid measures

· General information

Symptoms of poisoning may even occur after several hours; therefore medical observation for at

least 48 hours after the accident.

· After inhalation Supply fresh air; consult doctor in case of symptoms.

· After skin contact

Immediately wash with water and soap and rinse thoroughly.

If skin irritation continues, consult a doctor.

· After eye contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor.

· After swallowing Instantly call for doctor.

· 4.2 Most important symptoms and effects, both acute and delayed

No further relevant information available.

· 4.3 Indication of any immediate medical attention and special treatment needed

No further relevant information available.

Fire-fighting measures

· 5.1 Extinguishing media

· Suitable extinguishing agents

CO2, extinguishing powder or water spray. Fight larger fire with alcohol-resistant foam.

Use fire fighting measures that suit the environment.

· 5.2 Special hazards arising from the substance or mixture

Formation of toxic gases is possible during heating or in case of fire.

- carbon dioxide, carbon monoxide

- tin oxide

5.3 Advice for firefighters

· Protective equipment: Wear self-contained breathing apparatus.

Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures Not required.

· 6.2 Environmental precautions: No special measures required.

· 6.3 Methods and material for containment and cleaning up:

Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).

Dispose of contaminated material as waste according to item 13.

Ensure adequate ventilation.

· 6.4 Reference to other sections

See Section 7 for information on safe handling

See Section 8 for information on personal protection equipment.

See Section 13 for information on disposal.

Handling and storage

· 7.1 Precautions for safe handling

Store in cool, dry place in tightly closed containers.

Ensure good ventilation/exhaustion at the workplace.

Prevent formation of aerosols.

· Information about protection against explosions and fires: No special measures required.

· 7.2 Conditions for safe storage, including any incompatibilities

· Storage

· Requirements to be met by storerooms and containers: No special requirements.

· Information about storage in one common storage facility: Not required.

· Further information about storage conditions: Keep container tightly sealed.

· Storage class LGK 10-13

· 7.3 Specific end use(s) No further relevant information available.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:

Void

Shipping

Labels:

Void

SpecialProvisions

Inland waterway transport (UN RTDG/ADN(R))

UN number:

Void

Shipping

Labels:

Void

Remarks

Marine transport (UN RTDG/IMDG)

UN number:

Void

Shipping information

Proper shipping name and description:

Void

Chemical name:

Void

Labels:

Void

Remarks

Air transport (UN RTDG/ICAO/IATA)

UN number:

Void

Shipping information

Proper shipping name and description:

Void

Chemical name:

Void

Labels:

Void

Remarks

SpecialProvisions

Exposure controls / personal protection

Additional information about design of technical systems: No further data; see item 7.

· 8.1 Control parameters

· Components with limit values that require monitoring at the workplace: Not required.

· Additional information: The lists that were valid during the compilation were used as basis.

· 8.2 Exposure controls

· Personal protective equipment

· General protective and hygienic measures

Keep away from foodstuffs, beverages and food.

Take off immediately all contaminated clothing

Wash hands during breaks and at the end of the work.

Avoid contact with the eyes and skin.

· Breathing equipment:

In case of brief exposure or low pollution use breathing filter apparatus. In case of intensive or

longer exposure use breathing apparatus that is independent of circulating air.

· Protection of hands:

Protective gloves.

The glove material has to be impermeable and resistant to the product/ the substance/ the

preparation.

Selection of the glove material on consideration of the penetration times, rates of diffusion and the

degradation

· Material of gloves

The selection of the suitable gloves does not only depend on the material, but also on further marks

of quality and varies from manufacturer to manufacturer. As the product is a preparation of several

substances, the resistance of the glove material can not be calculated in advance and has therefore

to be checked prior to the application.

· Penetration time of glove material

The exact break trough time has to be found out by the manufacturer of the protective gloves and

has to be observed.

· Eye protection: Tightly sealed safety glasses.

· Body protection: Protective work clothing.

Stability and reactivity

· 10.1 Reactivity No further relevant information available.

· 10.2 Chemical stability

· Thermal decomposition / conditions to be avoided:

No decomposition if used according to specifications.

· 10.3 Possibility of hazardous reactions No dangerous reactions known

· 10.4 Conditions to avoid Protect from moisture.

· 10.5 Incompatible materials: water

· 10.6 Hazardous decomposition products: In case of fire: see Section 5.

Disposal considerations

· 13.1 Waste treatment methods

· Recommendation Must be specially treated under adherence to official regulations.

· Uncleaned packagings:

· Recommendation: Disposal must be made according to official regulations.