Octylamine

Guidance on Safe Use

First-aid measures

- Inhalation

Keep at rest. Aerate with fresh air. Call a physician immediately. Symptoms of poisoning may develop many hours after exposure.

- Skin

Wash off with 3% acetic acid followed by large amounts of plain water for at least 5 min as a final step. Immediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficulty.

- Eyes

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses. Immediate medical attention is required.

- Ingestion

Call a physician immediately. Do not induce vomiting without medical advice.

Most important symptoms and effects, both acute and delayed

Main symptoms

shortness of breath, convulsions, cough, hypertensive effect.

Special hazard: Stomach perforation, Lung oedema.

Indication of any immediate medical attention and special treatment needed

General advice

Remove contaminated, soaked clothing immediately and dispose of safely. First aider needs to protect himself.

Treat as an alkaline substance (similar to ammonia). If ingested, irrigate the stomach. Treat skin and mucous membranes with antihistamine and corticoids. In caseof lung irritation, first treatment with cortisone spray. Symptoms may be delayed. Later control for pneumonia and lung oedema.

Fire-fighting measures

Extinguishing media

- Suitable extinguishing media

alcohol-resistant foam, dry chemical, carbon dioxide (CO2), water spray

- Unsuitable Extinguishing Media

Do not use a solid water stream as it may scatter and spread fire.

Special hazards arising from the substance or mixture

Under conditions giving incomplete combustion, hazardous gases produced may consist of:

- carbon monoxide (CO)

- carbon dioxide (CO2)

- nitrogen oxides (NOx)

Combustion gases of organic materials must in principle be graded as inhalation poisons

Vapours are heavier than air and may spread along floors

Advice for firefighters

- Special protective equipment for firefighters

Fire fighter protection should include a self-contained breathing apparatus (NIOSH-approved or EN 133) and full fire-fighting turn out gear.

- Precautions for firefighting

Cool containers / tanks with water spray. Water run-off and vapor cloud may be corrosive. Water run-off can cause environmental damage. Do not allow run-off from fire fighting to enter drains or water courses. Dike and collect water used to fight fire. Keep people away from and upwind of fire.

Accidental release measures

Personal precautions, protective equipment and emergency procedures

For non-emergency personnel: For personal protective equipment see section 8. Avoid contact with skin and eyes. Avoid breathing vapors or mists. Keep people away from and upwind of spill/leak. Ensure adequate ventilation, especially in confined areas. Keep away from heat and sources of ignition. For emergency responders: Personal protection see SDS.

Environmental precautions

Prevent further leakage or spillage. Do not discharge product into the aquatic environment without pretreatment (biological treatment plant). Water runoff can cause environmental damage.

Methods and material for containment and cleaning up

- Methods for containment

Stop the flow of material, if possible without risk. Dike spilled material, where this is possible.

- Methods for cleaning up

Soak up with inert absorbent material. DO NOT use combustible materials such as sawdust. Keep in suitable, closed containers for disposal. If liquid has been spilt in large quantities clean up promptly by scoop or vacuum. Dispose of in accordance with local regulations. Take necessary action to avoid static electricity discharge (which might cause ignition of organic vapours).

Handling and storage

Precautions for safe handling

Advice on safe handling: Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product.

Provide sufficient air exchange and/or exhaust in work rooms. Refill and handle product only in closed system.

Hygiene measures

When using, do not eat, drink or smoke. Take off all contaminated clothing immediately. Wash hands before breaks and immediately after handling the product.

Incompatible products

- strong acids

- oxidizing agents

Conditions for safe storage, including any incompatibilities

Advice on protection against fire and explosion

Keep away from sources of ignition - No smoking. Take necessary action to avoid static electricity discharge (which might cause ignition of organic vapours). In case of fire, emergency cooling with water spray should be available. Ground and bond containers when transferring material.

Technical measures/Storage conditions

Keep containers tightly closed in a cool, well-ventilated place. Handle and open container with care. Handle under nitrogen, protect from moisture. Keep at temperatures between -1 and 38 °C (30 and 100 °F).

Temperature class

T3

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:

UN 2734

Shipping information

Proper shipping name and description:

Amines, liquid, corrosive, flammable, n.o.s.

Chemical name:

n-Octylamine

Language:

English

SpecialProvisions

Inland waterway transport (UN RTDG/ADN(R))

UN number:

UN 2734

Shipping information

Proper shipping name and description:

Amines, liquid, corrosive, flammable, n.o.s.

Chemical name:

n-Octylamine

Language:

English

Special provisions / remarks

Remarks:

ADN Taker forbidden

Marine transport (UN RTDG/IMDG)

UN number:

UN 2734

Shipping information

Proper shipping name and description:

Amines, liquid, corrosive, flammable, n.o.s.

Chemical name:

n-Octylamine

Marine pollutant

Remarks

Air transport (UN RTDG/ICAO/IATA)

UN number:

UN 2734

Shipping information

Proper shipping name and description:

Amines, liquid, corrosive, flammable, n.o.s.

Chemical name:

n-Octylamine

Remarks

Additional transport information

Additional information

Special provisions / remarks / other:

Fish & Tree Marking for all regulations needed

Exposure controls / personal protection

Appropriate Engineering controls

General or dilution ventilation is frequently insufficient as the sole means of controlling employee exposure. Local ventilation is usually preferred. Explosion-proof equipment (for example fans, switches, and grounded ducts) should be used in mechanical ventilation systems.

Personal protective equipment

- General industrial hygiene practice

Avoid contact with skin, eyes and clothing. Do not breathe vapours or spray mist. Ensure that eyewash stations and safety showers are close to the workstation location.

- Hygiene measures

When using, do not eat, drink or smoke. Take off all contaminated clothing immediately. Wash hands before breaks and immediately after handling the product.

- Eye protection

Tightly fitting safety goggles. In addition to goggles, wear a face shield if there is a reasonable chance for splash to the face. Equipment should conform to EN 166

- Hand protection

Wear protective gloves. Recommendations are listed below. Other protective material may be used, depending on the situation, if adequate degradation and permeation data is available. If other chemicals are used in conjunction with this chemical, material selection should be based on protection for all chemicals present.

      Suitable material:       nitrile rubber

      Evaluation:              according to EN 374: level 3

      Glove thickness:       approx 0,55 mm

      Break through time:       approx 60 min

      Suitable material:       polyvinylchloride

      Evaluation:              Information derived from practical experience

      Glove thickness:       approx 0,8 mm

- Skin and body protection

Impervious clothing. Wear face-shield and protective suit for abnormal processing problems.

- Respiratory protection

Respirator with A filter. Full mask with above mentioned filter according to producers using requirements or self-contained breathing apparatus. Equipment should conform to EN 136 or EN 140 and EN 143.

Environmental exposure controls

Use product only in closed system. If leakage can not be prevented, the substance needs to be suck off at the emersion point, if possible without danger. If recycling is not practicable, dispose of in compliance with local regulations. Inform the responsible authorities in case of leakage into the atmosphere, or of entry into waterways, soil or drains.

Stability and reactivity

- Reactivity

The reactivity of the product corresponds to the typical reactivity shown by the substance group as described in any ext book on organic chemistry.

- Chemical stability

Stable under recommended storage conditions.

- Possibility of hazardous reactions

Hazardous polymerisation does not occur.

- Conditions to avoid

Avoid contact with heat, sparks, open flame and static discharge. Avoid any source of ignition.

- Incompatible materials

strong acids, oxidizing agents.

- Hazardous decomposition products

No decomposition if stored and applied as directed. If heated to thermal decomposition the following decomposition products may occur depending on the conditions. carbon monoxide (CO). nitrogen oxides (NOx). cyanides. nitric acid. nitriles.

Disposal considerations

Waste treatment methods

- Product Information

Disposal required in compliance with all waste management related state and local regulations. The choice of the appropriate method of disposal depends on the product composition by the time of disposal as well as the local statutes and possibilities for disposal.

Hazardous waste according to European Waste Catalogue (EWC)

- Uncleaned empty packaging

Contaminated packaging should be emptied as far as possible and after appropriate cleansing may be taken for reuse.