Dinaphtho[1,2,3-cd:3',2',1'-lm]perylene-5,10-dione, (9,10-dihydro-9,10-dioxo-1-anthracenyl)amino derivs.

Flammability

Link to relevant study record(s)

Reference

Endpoint:

flammable solids

Type of information:

experimental study

Adequacy of study:

key study

Study period:

Study completion date: 11 May, 2015

Reliability:

1 (reliable without restriction)

Rationale for reliability incl. deficiencies:

guideline study

Qualifier:

according to guideline

Guideline:

EU Method A.10 (Flammability (Solids))

Deviations:

no

Principles of method if other than guideline:

Guideline followed

GLP compliance:

no

Specific details on test material used for the study:

- Product: FAT 45082/I TE
- Lot: JL1101V5C

Key result

Test procedure:

burning rate test: preliminary screening test

Remarks on result:

substance does not ignite and propagate combustion either by burning with flame or smouldering along 200 mm of the powder train within the 2 minutes test period

Findings

Safety Pre-Test

A small amount of the test item was heated on a magnesia groove with a gas burner. Glowing was observed. The test item showed no signs of ignition.

Preliminary screening test

The test item was heated with the flame of a teclu burner. Glowing was observed during heating. No ignition occurred within two minutes.

Interpretation of results:

GHS criteria not met

Conclusions:

FAT 45082/I TE should be considered as not highly flammable.

Executive summary:

The flammability of FAT 45082/I TE was evaluated in a study conducted according to EU Method A.10. A preliminary screening test was performed to determine if, on ignition by a gas flame, propagation by burning with flame or smoldering occurs. If propagation over 200 mm of the train piled from test substance, occurs within a specified time, then a full test programme to determine the burning rate was to be carried out. However no ignition occured within two minutes, hence the test item was classified as not highly flammable and no determination of burning rate was necessary.

Description of key information

The flammability of FAT 45082/I was evaluated in a study conducted according to EU Method A.10. A preliminary screening test was performed to determine if, on ignition by a gas flame, propagation by burning with flame or smoldering occurs. If propagation over 200 mm of the train piled from test substance, occurs within a specified time, then a full test programme to determine the burning rate was to be carried out. However, no ignition occured within two minutes, hence the test item was classified as not highly flammable and no determination of burning rate was necessary.

Key value for chemical safety assessment

Flammability:

non flammable

Justification for classification or non-classification

FAT 45082/I was considered to be not flammable. Hence, it does not warrant classification according to the criteria of Regulation (EC) No. 1272/2008 (CLP).