Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 809-911-5
CAS number: 1431329-07-5
Three studies are available:Drop-Weight Impact Sensitivity Tests: The sample did not show any sign of “explosion” when subjected to the highest impact energy of 100 J (Baker, 2015).Friction Sensitivity Tests: The sample did not show any sign of “explosion” when tested at the highest friction load setting of the apparatus (360 N) (Baker, 2015).Explosion Severity (Pmax, KSt) Tests: The sample was highly explosible having a KSt value of 255 bar-m/sec (Baker, 2015).
Three studies are available:
The Drop-Weight Impact test indicates that the sample showed no
"explosion" when subjected to strong impact stimuli. In the process
environment, efforts should be made to try and minimize the exposure of
this material to very strong impact energies (>100 J) (Baker, 2015).
Friction sensitivity test results indicate that the sample is not
sensitive to friction stimuli under the conditions tested. The sample
did not show any sign of "explosion" when tested at the highest
friction load setting of the apparatus (360 N). The UN Manual of Tests
and Criteria for Transportation of Dangerous Goods considers this sample
to be safe for transport since the limiting loads are greater than 80 N
The sample was highly explosible having a KSt value of 255
bar-m/sec, thus, classifying it as an St2 class dust. Mitigation
strategies will be required when handling this powder to minimize the
risk of an explosion (Baker, 2015).
The test substance does not show any sign of "explosion" when subjected
to the highest impact energy of 100 J and tested at the highest friction
load setting of the apparatus (360 N).
Therefore in accordance with Regulation (EC) No. 1272/2008 section
220.127.116.11 the substance shall not be classified as explosive.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again