Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Measures: Safety implementation  

First adi procedures

Inhalation: Move to fresh air. Call a physician if symptoms develop or persist.

Skin: Remove contaminated clothing. Wash with soap and water. Get medical attention if irritation develops and persists.

Eye: Flush eyes thoroughly with water for at least 15 minutes. Get medical attention if irritation develops or persists.

Oral exposure /Ingestion: In case of oral exposure rinse mouth for at least 15 minutes. For chemical ingestion seek medical attention.

Notes to physician: Treat symptomatically.

General advice: Get medical attention if any discomfort develops.

Fire-fighting measures

Personal precautions, protective equipment: Remove all sources of ignition. Use personal protective equipment

Suitable extinguishing media: Dry chemical, CO2, water spray, fog, or foam.

Unsuitable extinguishing media: Do not use water jet as an extinguisher, as this will spread the fire.

Specific hazards arising from the chemical: By heating and fire, toxic vapors/gases may be formed.

Protective equipment and precautions for firefighters: Move containers from fire area if you can do it without risk. Use water spray to cool unopened containers. Self-contained breathing apparatus and full protective clothing must be worn in case of fire.

Accidental release measures

Personal precautions: Ensure adequate ventilation. For personal protection, see section "Exposure Controls/Personal protection".

Environmental precautions: Do not allow to enter drains, sewers or watercourses.

Methods for containment: Stop leak if you can do so without risk. Dike the spilled material, where this is possible.

Release Measures: Keep away from open flames, hot surfaces and sources of ignition.

Methods for cleaning up: Small Spills: Absorb spillage with non-combustible, absorbent material.

Large Spills: Use a non-combustible material like vermiculite, sand or earth to soak up the product and place into a container for later disposal. Wash area with soap and water.

Handling and storage

Handling: Avoid contact with eyes and prolonged skin contact. Wash hands after contact. Observe good industrial hygiene practices.

Storage: Keep container tightly closed in a dry and well-ventilated place.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
1993
Shipping information
Proper shipping name and description:
Flammable liquid n.o.s.
Labels:
UN1993, Flammable Liquid, n.o.s., (isopropyl alcohol) 3, III
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
1993
Shipping information
Proper shipping name and description:
Flammable liquid n.o.s.
Labels:
UN1993, Flammable Liquid, n.o.s., (isopropyl alcohol) 3, III
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Recommended monitoring procedures: Follow standard monitoring procedures.

Engineering controls / Personal protective equipment : Provide adequate ventilation and minimize the risk of inhalation of vapors and mists.

Eye/face protection: Wear safety glasses, if risk of splashing, wear safety goggles or face shield.

Skin protection: Wear suitable protective clothing.

Respiratory protection: In case of inadequate ventilation or risk of inhalation of vapors, use suitable respiratory equipment. Use a positive-pressure air-supplied respirator if there is any potential for an uncontrolled release, exposure levels are not known, or any other circumstances where air-purifying respirators may not provide adequate protection. Seek advice from local supervisor.

Hand protection: Use impervious gloves.

Stability and reactivity

Chemical stability: Stable at normal conditions.

Possibility of hazardous reactions: Hazardous polymerization does not occur.

Conditions to avoid: Contact with incompatible materials. Ignition sources.

Incompatible materials: Oxidizing agents. Alkaline materials.

Hazardous decomposition product: Oxides of carbon, phosphorous, titanium.

Disposal considerations

Disposal methods: Dispose in accordance with all applicable regulations.

Waste from residues unused products: Dispose of in accordance with local regulations.

Contaminated packaging: Dispose of in accordance with local regulations.