Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 289-969-0 | CAS number: 90046-02-9 Extractives and their physically modified derivatives such as tinctures, concretes, absolutes, essential oils, oleoresins, terpenes, terpene-free fractions, distillates, residues, etc., obtained from Juniperus oxycedrus, Cupressaceae.
Guidance on Safe Use
Administrative data
First-aid measures
4.1 Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
4.1.1 If inhaled :
If breathed in move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
4.1.2 In case of skin contact:
Wash off with soap and plenty of water. Consult a physician.
4.1.3 In case of eye contact:
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
4.1.4 If swallowed: Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
4.2 Most important symptoms and effects, both acute and delayed
May cause an allergic skin reaction.
Causes serious eye irritation.
4.3 Indication of any immediate medical attention and special treatment needed
See 4.1
Fire-fighting measures
5.1 Extinquishing media
Suitable extinguishing media
For small (incipient) fires, use media such as "alcohol" foam, dry chemical, or carbon dioxide. For large fires, apply water from as far as possible. Use very large quantities (flooding) of water applied as a mist or spray; solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water.
5.2 Special hazards arising from the substance or mixture
Nature of decomposition products not known.
5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
5.4 Further informations
Use water spray to cool unopened containers..
Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures:
Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas.
For personal protection see section 8.
6.2 Environmental precautions:
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
6.3 Methods and material for containment and cleaning up:
Contain spillage and use inert absorbing material.
6.4 Reference to other sections:
For disposal see section 13.
Handling and storage
7.1 Precautions for safe handling:
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist. Keep away from sources of ignition -No smoking.Take measures to prevent the buildup of electrostatic charge. For precautions see section 2.2.
7.2 Conditions for safe storage, including eventual incompatibilites:
Store in cool place. Keep away from direct sunlight. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.
7.3 Specific end use(s):
A part from the uses mentioned in section 1.2 no other specific uses are stipulated.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- No data
Shipping information
- Proper shipping name and description:
- Extracts, aromatic, liquid
- Chemical name:
- Cade Oil
- Language:
- English
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
8.1 Control parameters
Components with workplace control parameters
8.2 Exposure controls
8.2.1 Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
8.2.2 Personal protective equipment
Eye/face protection - Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection - Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Body protection - Impervious clothing, Flame retardant antistatic protective clothing, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection - Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU)
8.2.3 Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Stability and reactivity
10.1 Reactivity
No data available
10.2 Stability
Stable under recommended storage conditions
10.3 Possibility of hazardous reactions
No data available
10.4 Conditions to avoid
Strong heating, flames and sparks
10.5 Incompatible materials
Strong oxidizing agents
10.6 Hazardous decomposition products
No data available
Disposal considerations
13.1 Waste treatment methods
Avoid release to the environment. Dispose of this material and its container to an authorized waste collection point. Dispose of according to local safety regulations (Regulation (EC) 2008/98 for Europe).
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
