Registration Dossier

Administrative data

First-aid measures

After inhalation: fresh air.
After skin contact: wash off with plenty of water. Remove contaminated clothing.
After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. If swallowed: give water to drink (two glasses at most). Seek medical advice immediately. In exceptional cases only, if medical care is not available within one hour, induce vomiting (only in persons who are wide awake and fully conscious), administer activated charcoal (20 - 40 g in a 10% slurry) and consult a doctor as quickly as possible.

irritant effects
Risk of blindness!
No information available.

Fire-fighting measures

Use extinguishing measures that are appropriate to local circumstances and the surrounding
environment.
For this substance/mixture no limitations of extinguishing agents are given.
Not combustible.
Ambient fire may liberate hazardous vapours.
Fire may cause evolution of:
Hydrogen fluoride, Oxides of phosphorus
Special protective equipment for fire-fighters
In the event of fire, wear self-contained breathing apparatus.
Further information
Suppress (knock down) gases/vapours/mists with a water spray jet. Prevent fire extinguishing
water from contaminating surface water or the ground water system.

Accidental release measures

Advice for non-emergency personnel: Avoid substance contact.Avoid inhalation of dusts. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Cover drains. Collect, bind, and pump off spills.Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts.

Handling and storage

Observe label precautions.
Tightly closed. Dry.
Store at +15°C to +25°C.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Technical measures and appropriate working operations should be given priority over the use of
personal protective equipment.
Protective clothing needs to be selected specifically for the workplace, depending on
concentrations and quantities of the hazardous substances handled. The chemical resistance of
the protective equipment should be enquired at the respective supplier.
Hygiene measures
Change contaminated clothing. Wash hands after working with substance.
Eye/face protection
Tightly fitting safety goggles
Hand protection
splash contact:
Glove material: butyl-rubber
Glove thickness: 0,7 mm
Break through time: > 10 min
The protective gloves to be used must comply with the specifications of EC Directive
89/686/EEC and the related standard EN374.
protective clothing
Respiratory protection
required when dust are generated
Do not let product enter drains.

Stability and reactivity

The product is chemically stable under standard ambient conditions (room temperature) .Violent reactions possible with:
Strong oxidizing agents

Disposal considerations

Waste material must be disposed of in accordance with the Directive on waste 2008/98/EC as
well as other national and local regulations. Leave chemicals in original containers. No mixing
with other waste. Handle uncleaned containers like the product itself.