Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 701-254-1 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
Description of first aid measures
General advice : Move out of dangerous area.
Consult a physician.
Show this safety data sheet to the doctor in attendance.
If inhaled : Move to fresh air in case of accidental inhalation of dust or
fumes from overheating or combustion.
If symptoms persist, call a physician.
In case of skin contact : Take off contaminated clothing and shoes immediately.
Wash off with soap and plenty of water.
In case of burns apply cold water until pain subsides then
seek medical advice.
In case of eye contact : Flush eyes with water as a precaution.
Remove contact lenses.
Protect unharmed eye.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.
If swallowed : Clean mouth with water and drink afterwards plenty of water.
Do not give milk or alcoholic beverages.
Never give anything by mouth to an unconscious person.
Obtain medical attention.
Fire-fighting measures
5.1 Extinguishing media
Suitable extinguishing
media
: Use water fog, foam, dry chemical or carbon dioxide (CO2) to
extinguish flames
Unsuitable extinguishing
media
: Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.
5.2 Special hazards arising from the substance or mixture
Combustibility : Not classified as flammable or combustible, but will combust if
ignited.
Hazardous combustion
products
: Sulphur oxides
Carbon monoxide, carbon dioxide and unburned
hydrocarbons (smoke).
Flammable properties : See Section 9 for information on flammability.
5.3 Advice for firefighters
Protective equipment and
precautions for firefighters
: In the event of fire, wear self-contained breathing apparatus.
Fire Fighting Instructions : Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.
Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Personal precautions : Advice for emergency responders
Ensure adequate ventilation.
Use personal protective equipment.
For personal protection see section 8.
Advice for non-emergency personnel
Avoid contact with spilled material. Do not touch or walk
through spilled material.
Keep people away from and upwind of spill/leak.
6.2 Environmental precautions
Environmental precautions : See attached ES
Prevent entry into waterways, sewers, basements or
confined areas.
Do not flush into surface water or sanitary sewer system.
If the product contaminates rivers and lakes or drains inform
respective 6.3 Methods and materials for containment and cleaning up
Methods for cleaning up : Prevent further leakage or spillage if safe to do so.
Large Spills: Dyke far ahead of liquid spill for later recovery
and disposal.
Recover by pumping or with suitable absorbent
Report spills as required to appropriate authorities.
Seek the advice of a specialist before using dispersants.
Dispose of according to local regulations.
In the event of a spill or accidental release, notify relevant
authorities in accordance with all applicable regulations.
Material will float on water, use containment booms as a
barrier to protect shorelines.
Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Keep in suitable, closed containers for disposal.authorities.
Handling and storage
7.1 Precautions for safe handling
Smoking, eating and drinking should be prohibited in the application area.
Dispose of rinse water in accordance with local and national regulations.
Normal measures for preventive fire protection.
Products may load from Infineum manufacturing site above the standard loading/unloading range.
Loading/unloading
temperature
: 35 °C (95 ° F) - 60 °C (140 ° F)
Viscosity @
Loading/unloading
temperature
: 130 cSt - 1.200 cSt
Static accumulator : This material is not a static accumulator.
7.2 Conditions for safe storage, including any incompatibilities
Keep container tightly closed in a dry and well-ventilated place.
No decomposition if stored and applied as directed.
Do not reheat above: 60 °C (140 ° F)
Storage temperature : <= 60 °C (140 ° F)
Incompatible materials and
coatings
: no data available
7.3 Specific end use(s)
Specific use(s) : : This material should not be used for any other purpose
than that recommended without expert advice.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- Not regulated
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- Not regulated
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- Not regulated
Shipping information
- Proper shipping name and description:
- Not regulated
- Chemical name:
- Not regulated
- Labels:
- Not regulated
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- Not regulated
Shipping information
- Proper shipping name and description:
- Not regulated
- Chemical name:
- Not regulated
- Labels:
- Not regulated
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Control parameters / Occupational Exposure Limits
Exposure limits for materials that can be formed when handling this product: When mists/aerosols
can occur, the following are recommended: 5mg/m³ - ACGIH TLV, 10 mg/m³ - ACGIH STEL
Limits/standards shown for guidance only. Follow applicable regulations.
Occupational exposure controls
Appropriate engineering
controls
: No special requirements under ordinary conditions of use and
with adequate ventilation.
:
Individual protection measures, such as personal protective equipment
Respiratory protection : In the case of vapour formation use a respirator with an
approved filter.
Hand protection : Polyvinyl alcohol or nitrile- butyl-rubber gloves
Before removing gloves clean them with soap and water.
Please observe the instructions regarding permeability and
breakthrough time which are provided by the supplier of the
gloves. Also take into consideration the specific local
conditions under which the product is used, such as the
danger of cuts, abrasion, and the contact time.
When handling hot material, use heat resistant gloves.
Eye/face protection : Eye wash bottle with pure water
Tightly fitting safety goggles
Skin and body protection : impervious clothing
Choose body protection according to the amount and
concentration of the dangerous substance at the work place.
Long sleeved clothing
Advice on general occupational hygiene
Hygiene measures : Handle in accordance with good industrial hygiene and safety
practice.
When using do not eat or drink.
When using do not smoke.
Wash hands before breaks and at the end of workday.
Stability and reactivity
10.1 Reactivity
No dangerous reaction known under conditions of normal use.
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
Hazardous reactions : No hazards to be specially mentioned.
10.4 Conditions to avoid
Conditions to avoid : Elevated temperatures. Excessive heat.
10.5 Incompatible materials
Incompatible materials : Strong oxidizing agents
10.6 Hazardous decomposition products
Hazardous decomposition
products
: No decomposition if used as directed
Disposal considerations
13.1 Waste treatment methods
Product : The product should not be allowed to enter drains, water
courses or the soil.
Do not contaminate ponds, waterways or ditches with
chemical or used container.
Dispose of contents/ container to an approved waste disposal
plant.
Disposal recommendations based on material as supplied, Disposal must be in accordance with
applicable laws and regulations, and material characteristics at time of disposal
For the safety of persons conducting disposal, recycling or reclamation activities, refer to the
information in Section 8, Exposure control and personal protection.
Empty containers.
Empty Container Warning (where applicable): Empty containers may contain residue and can be
dangerous. Do not attempt to refill or clean containers without proper instructions. Empty drums
should be completely drained and safely stored until appropriately reconditioned or disposed.
Empty containers should be taken for recycling, recovery, or disposal through suitably qualified or
licensed contractor and in accordance with governmental regulations. DO NOT PRESSURISE,
CUT, WELD, BRAZE, SOLDER, DRILL, GRIND, OR EXPOSE SUCH CONTAINERS TO HEAT,
FLAME, SPARKS, STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION. THEY MAY
EXPLODE AND CAUSE INJURY OR DEATH.
Regulatory disposal information
European Waste Code : 13 02 XX
waste engine, gear and lubricating oils
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
