Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

General information:

Remove soiled or soaked clothing immediately. If someone exposed to the product feels unwell, contact a doctor and show this safety data

sheet.

After inhalation: Remove the casualty into fresh air and keep him calm.

After contact with skin:

In case of contact with skin wash off immediately with polyethylene glycol 400, then with plenty of water. If polyethylene glycol is not available, rinse of with plenty of water. Consult a doctor if skin irritation persists.

After contact with eyes:

Rinse the affected eye immediately with plenty of water at the same time keep the unaffected eye well protected.

After ingestion: Call in a physician immediately and show him the Safety Data Sheet.

Fire-fighting measures

Suitable extinguishing media: water spray jet, foam

Extinguishing media that must not be used for safety reasons: Full water jet, carbon dioxide, dry powder

Special hazards from the substance itself, its combustion products or from its vapours:

In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO), Nitrous gases (NOx)

Special protective equipment for firefighting: Use self-contained breathing apparatus

Further information: Fire residues and contaminated firefighting water must be disposed of in accordance with the local regulations.

Accidental release measures

Personal precautions:

Wear suitable personal protective equipment. Avoid contact with skin and eyes. Remove persons to safety.

Environmental precautions: Do not allow entry to drains,water courses or soil

Methods for cleaning up/taking up:

Take up mechanically. Avoid dust formation and electrical charging (sparking) because dust explosion might occur. When picked up, treat material as prescribed under heading "Disposal".

Handling and storage

Advice on safe handling: When used and handled appropriately no special measures are needed. Avoid dust formation.

Advice on protection against fire and explosion:

Observe the general rules of industrial fire protection. Take precautionary measures against electrostatic charges - earthing necessary during loading operations. Keep away from sources of ignition. Dust can form an explosive mixture with air.

Dust explosion class : ST1 Capable of dust explosion

Further information on storage conditions

Keep container tightly closed in a cool, well-ventilated place, open and handle carefully.

Keep away from sources of ignition.

Storage class:

11 Combustible solids

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
not restricted
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
not restricted
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
not restricted
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
not restricted
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

During its lifecycle the substance is handled under strictly controlled conditions and is rigorously contained in accordance with Art. 18.

Based on the knowledge of the basic hazards to humans and environment technical, organizational and PPE measures are taken to minimize release and exposure of this substance. National regulatory requirements for the handling of chemicals are also fulfilled. Employees are regularly trained. The efficiency of these measures is controlled e.g. by workplace measurements. In case of deviations these measures are adapted.

General protective measures:

Observe the usual precautions for handling chemicals. Do not inhale dust. Avoid contact with eyes and skin. Do not inhale dust/fumes/aerosols.

Hygiene measures:

Wash hands before breaks and after work. Use barrier skin cream. Remove soiled or soaked clothing immediately and clean thoroughly before using again.

Respiratory protection : Wear dust mask when handling large quantities.

Hand protection :

Nitrile rubber gloves. Minimum breakthrough time (glove): not determined. Minimum thickness (glove): not determined

Observe the information of the glove manufacturers on permeability and breakthrough times and other workplace requirements

Eye protection : safety glasses

Body protection : working clothes

Stability and reactivity

Thermal decomposition : 335 °C, Method : DSC

Hazardous reactions: When handled and stored appropriately no dangerous reactions are known

Hazardous decomposition products: Nitrous gases

Disposal considerations

Product: Special waste incineration plant, after consultation with operators

Uncleaned packaging: Packaging that cannot be cleaned should be disposed of as product waste