Dibutyltin di(acetate)

Skin irritation / corrosion

Administrative data

Endpoint:

skin irritation / corrosion

Remarks:

other: in vitro

Type of information:

experimental study

Adequacy of study:

key study

Study period:

The study was performed between 11 May 2010 and 14 May 2010.

Reliability:

1 (reliable without restriction)

Rationale for reliability incl. deficiencies:

other: In vitro corrosion study conducted to recognised guidelines and GLP.

Data source

Reference

Reference Type:

study report

Title:

Unnamed

Year:

2010

Report date:

2010

Materials and methods

Test guideline

Qualifier:

according to guideline

Guideline:

other: OECD Guideline for the Testing of Chemicals No. 431 “In Vitro Skin Corrosion: Human Skin Model Test” (adopted 13 April 2004)

Deviations:

no

GLP compliance:

yes (incl. QA statement)

Test material

Test material information

Constituent 1

Reference substance name:

Dibutyltin di(acetate)

EC Number:

213-928-8

EC Name:

Dibutyltin di(acetate)

Cas Number:

1067-33-0

Molecular formula:

C12H24O4Sn

IUPAC Name:

dibutyltin di(acetate)

Details on test material:

Sponsor's identification: CAS No 1067-33-0
Description: clear colourless liquid
Batch number: 156 004 10/1
Date received: 15 April 2010
Expiry date: 08 September 2010
Storage conditions: room temperature in the dark over silica gel

The integrity of supplied data relating to the identity, purity and stability of the test material is the responsibility of the Sponsor.
A Certificate of Analysis was supplied by the Sponsor.

Test animals

Species:

other: Reconstituted Human Epidermis (RHE)

Strain:

other: Not applicable

Details on test animals or test system and environmental conditions:

The EPISKIN model is a three-dimensional reconstituted human epidermis model consisting of adult human-derived epidermal keratinocytes seeded on a dermal substitute consisting of a collagen type I matrix coated with type IV collagen. A highly differentiated and stratified epidermis model is obtained after a 13 day culture period comprising the main basal, supra basal, spinous and granular layers and a functional stratum corneum.

EPISKIN Model Kit 0.38 cm2
Supplier: SkinEthic Laboratories, Nice, France
Date received: 11 May 2010

Test system

Vehicle:

unchanged (no vehicle)

Controls:

other: Duplicate tissues, treated with 50 µl of 0.9% w/v sodium chloride solution served as negative controls. Duplicate tissues, treated with 50 µl of glacial acetic acid served as positive controls.

Amount / concentration applied:

50 µl of the test material was applied

Duration of treatment / exposure:

Duplicate tissues were treated with the test material for exposure periods of 3, 60 and 240 minutes.

Number of animals:

Not applicable

Results and discussion

In vivo

Results

Results 1

Irritation parameter:

other: Relative mean viability (%)

Basis:

other: n/a

Time point:

other: 3 minutes

Score:

95.9

Reversibility:

not reversible

Results 2

Irritation parameter:

other: Relative mean viability (%)

Basis:

other: n/a

Time point:

other: 60 minutes

Score:

15.7

Reversibility:

not reversible

Results 3

Irritation parameter:

other: Relative mean viability (%)

Basis:

other: n/a

Time point:

other: 240 minutes

Score:

13.2

Reversibility:

not reversible

Irritant / corrosive response data:

Direct MTT Reduction:
The MTT solution containing the test material did not turn blue/purple. This was taken to indicate the test material did not reduce MTT.

Test Material, Positive Control Material and Negative Control Material:
Mean OD540 values and viabilities for the negative control, positive control and test material are given in Table 1.

The relative mean viability of the test material treated tissues was as follows:
240 minutes exposure : 13.2%
60 minutes exposure : 15.7%
3 minutes exposure : 95.9%

The qualitative evaluation of tissue viability is given in Table 2.

Following the 3 Minute exposure period the test material treated tissues appeared blue which was considered to be indicative of viable tissue. Following the 60 and 240 Minute exposure periods the test material treated tissues appeared white which was considered to be indicative of dead tissue.

Quality Criteria:
The relative mean tissue viability for the positive control treated tissues was 19.0% relative to the negative control treated tissues following the 240-minute exposure period. The positive control acceptance criterion was therefore satisfied.

Any other information on results incl. tables

The test material was classified as Corrosive to the skin.

The test material was also classified as corrosive to the skin according to EU labelling regulations Commission Directive 2001/59/EC. The symbol “C”, the indication of danger “Corrosive” and the risk phrase R 34 “CAUSES BURNS” are therefore required. The UN packing group II is also required.

Table 1: Mean OD₅₄₀ Values and Viabilities for the Negative Control Material, Positive Control Material and Test Material

Material	Exposure Period	Mean OD540of duplicate tissues	Relative mean viability (%)
Negative Control Material	240 Minutes	0.121	100*
Positive Control Material	240 Minutes	0.023	19
Test Material	240 Minutes	0.016	13.2
	60 Minutes	0.019	15.7
	3 Minutes	0.116	95.9

* = The mean viability of the negative control tissues is set at 100%

Table 2: Qualitative Evaluation of Tissue Viability (MTT uptake visual evaluation)

Material	Exposure Period	Tissue 1	Tissue 2
Negative Control Material	240 Minutes	-	-
Positive Control Material	240 Minutes	++	++
Test Material	240 Minutes	++	++
	60 Minutes	++	++
	3 Minutes	-	-

MTT Visual Scoring Scheme of EpiSkin Tissues

- = Blue tissue (viable)

+ = Blue/white tissue (semi-viable)

++ = Tissue completely white (dead)

Applicant's summary and conclusion

Interpretation of results:

corrosive

Remarks:

Migrated information

Conclusions:

The test material was classified as Corrosive to the skin.

Executive summary:

The purpose of this test is to evaluate the corrosivity potential of the test material using the EPISKIN^TM in vitro Reconstituted Human Epidermis (RHE) Model after treatment periods of 3, 60 and 240 minutes. This method was designed to meet the requirements of the following:

 OECD Guideline for the Testing of Chemicals No. 431 “In Vitro Skin Corrosion: Human Skin Model Test” (adopted 13 April 2004)

The EPISKIN^TM model is able to distinguish between corrosive and non-corrosive chemicals for all of the chemical types studied, and is also able to distinguish between known R35 (UN packing group I) and R34 (UN packing group II & III) chemicals.

Duplicate tissues were treated with the test material for exposure periods of 3, 60 and 240 minutes. At the end of the exposure period the test material was rinsed from each tissue before each tissue was taken for MTT-loading. After MTT loading a total biopsy of each epidermis was made and placed into micro tubes containing acidified isopropanol for extraction of formazan crystals out of the MTT-loaded tissues.

At the end of the formazan extraction period each tube was mixed thoroughly and duplicate 200 µl samples were transferred to the appropriate wells of a pre-labelled 96 well plate. The optical density was measured at 540 nm.

Data are presented in the form of percentage viability (MTT reduction in the test material treated tissues relative to negative control tissues).

The relative mean viability of the test material treated tissues was:

240 minutes exposure : 13.2%

60 minutes exposure : 15.7%

3 minutes exposure : 95.9%

The quality criteria required for acceptance of results in the test were satisfied.

The test material was classified as Corrosive to the skin.

The test material was also classified as corrosive to the skin according to EU labelling regulations Commission Directive 2001/59/EC. The symbol “C”, the indication of danger “Corrosive” and the risk phrase R 34 “CAUSES BURNS” are therefore required. The UN packing group II is also required.