Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 204-287-5 | CAS number: 118-92-3
Guidance on Safe Use
Administrative data
First-aid measures
4.1. Description of first aid measures
General information
Remove soiled or soaked clothing immediately
In case of medical condition, contact a physician and submit safety data sheet.
Adhere to personal protective measures when giving first aid
After inhalation
Immediately remove to fresh air. Consult a physician if irritating symptoms develop and persist.
After contact with skin
In case of contact with skin wash off immediately with plenty of water
If skin problems persist, seek medical advice.
After contact with eyes
Rinse immediately with gently running water for 15 minutes, maintaining eyelids open. Consult at once an ophthalmologist or a physician.
After ingestion
Rinse out mouth and give plenty of water to drink.
Obtain medical assistance.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms
No symptoms known currently.
Hazards
No hazards known at this time.
4.3. Indication of any immediate medical attention and special treatment needed
Treatment
Treat symptomatically.
Fire-fighting measures
5.1. Extinguishing media
Suitable extinguishing media
water spray jet
foam
dry chemical extinguisher
carbon dioxide
5.2. Special hazards arising from the substance or mixture
In case of fires, hazardous combustion gases are formed:
carbon oxides
nitrogen oxides
5.3. Advice for firefighters
Special protective equipment for firefighting
Use self-contained breathing apparatus
Further information
Cool container and metallic parts with a water spray jet
Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Wear personal protective equipment. Unprotected persons must be kept away.
6.2. Environmental precautions
Do not allow entry to drains,water courses or soil
6.3. Methods and material for containment and cleaning up
Take up mechanically
Avoid raising dust
Dispose of absorbed material in accordance with the regulations.
Clean equipment with water.
6.4. Reference to other sections
Additional information
Information regarding Safe handling, see chapter 7.
Handling and storage
7.1. Precautions for safe handling
Advice on safe handling
Keep dry.
Preferably handle in closed system.
Ventilation, local exhaust required.
Avoid the formation and deposition of dust.
Advice on protection against fire and explosion
Avoid formation of dust
Take precautions against accumulation of electrostatic charge
Keep away from sources of ignition.
7.2. Conditions for safe storage, including any incompatibilities
Further information on storage conditions
Keep container tightly closed and dry in a cool, well-ventilated place
Protect from atmospheric moisture and water
7.3. Specific end use(s)
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- not restricted
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- not restricted
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- not restricted
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- not restricted
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
8.1. Control parameters
Exposure limit values
Exposure limit values are not available.
DNEL/DMEL values
DNEL/DMEL values are not available.
PNEC values
PNEC values are not available.
8.2. Exposure controls
General protective measures
Do not inhale dust
Avoid contact with eyes and skin
Hygiene measures
Remove soiled or soaked clothing immediately.
Wash hands before breaks and after work.
Use barrier skin cream.
Respiratory protection : In case of dust formation, use a fine dust face mask.
Hand protection : chemical-resistant gloves
Observe the information of the glove manufacturers on permeability and breakthrough times and other workplace requirements
Eye protection : safety glasses with side protection shield
Body protection : working clothes
Stability and reactivity
10.1. Reactivity
10.2. Chemical stability
Under normal conditions the product is stable.
10.3. Possibility of hazardous reactions
Risk of dust explosions.
strong oxidizing agents
strong bases
10.4. Conditions to avoid
None known.
10.5. Incompatible materials
not known
10.6. Hazardous decomposition products
When used and handled as intended, none.
Disposal considerations
13.1. Waste treatment methods
Product
In accordance with local authority regulations, take to special waste incineration plant
Uncleaned packaging
For disposal local regulation is binding.
Composition
C ( 61,3 %) ,
H ( 5,1 %) ,
N ( 10,2 %) ,
O ( 23,3 %) ,
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
