Registration Dossier

Administrative data

First-aid measures

General advice: Remove contaminated clothing.
If inhaled: If difficulties occur after dust has been inhaled, remove to fresh air and seek medical attention.
On skin contact: Wash thoroughly with soap and water.
On contact with eyes: Wash affected eyes for at least 15 minutes under running water with eyelids held open.
On ingestion: Rinse mouth and then drink plenty of water.
Note to physician: Treatment: Treat according to symptoms (decontamination, vital functions), no known specific antidote.

Fire-fighting measures

Suitable extinguishing media: Dry extinguishing media, foam
Unsuitable extinguishing media for safety reasons: carbon dioxide
Additional information: Avoid whirling up the material/product because of the danger of dust explosion.
Specific hazards: harmful vapours, Evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of fire.
Special protective equipment: Wear a self-contained breathing apparatus.
Further information: The degree of risk is governed by the burning substance and the fire conditions. Contaminated extinguishing water must be disposed of in accordance with official regulations

Accidental release measures

Personal precautions: Avoid dust formation. Use personal protective clothing.
Environmental precautions: Contain contaminated water/firefighting water. Do not discharge into drains/surface waters/groundwater.
Methods for cleaning up or taking up:
- For small amounts: Pick up with suitable appliance and dispose of.
- For large amounts: Contain with dust binding material and dispose of.
- Avoid raising dust.

Handling and storage

- Breathing must be protected when large quantities are decanted without local exhaust ventilation.
- Protection against fire and explosion:
- Avoid dust formation. Take precautionary measures against static discharges.
- Dust explosion class: Dust explosion class 1 (Kst-value >0 up to 200 bar m s-1).
- Dust explosion class 1 (Kst-value >0 up to 200 bar m s-1).

- Further information on storage conditions: Keep container tightly closed and dry; store in a cool place. Keep only in the original container.

Transport information

Land transport (ADR/RID)

Shippingopen allclose all
ADR Not classified as a dangerous good under transport regulations
RID Not classified as a dangerous good under transport regulations
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

Shippingopen allclose all
ADNR Not classified as a dangerous good under transport regulations
Remarksopen allclose all

Marine transport (IMDG)

IMDG Not classified as a dangerous good under transport regulations
Remarksopen allclose all

Air transport ICAO/IATA

IATA/ICAO Not classified as a dangerous good under transport regulations
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Personal protective equipment
Respiratory protection:
Suitable respiratory protection for lower concentrations or short-term effect: Particle filter with medium efficiency for solid and liquid particles (e.g. EN 143 or 149, Type P2 or FFP2)

Hand protection:
Chemical resistant protective gloves (EN 374)
Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374):
e.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), polyvinylchloride (0.7 mm) and other
Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing.
Manufacturer's directions for use should be observed because of great diversity of types.

Eye protection:
Safety glasses with side-shields (frame goggles) (e.g. EN 166)

General safety and hygiene measures:
Handle in accordance with good industrial hygiene and safety practice. Wearing of closed work clothing is recommended.

Stability and reactivity

Conditions to avoid:
Avoid electro-static discharge.

Hazardous decomposition products:
hydrogen chloride
carbon oxides, nitrogen oxides, toxic gases/vapours

Disposal considerations

Must be dumped or incinerated in accordance with local regulations.

Contaminated packaging:
Uncontaminated packaging can be re-used.
Packs that cannot be cleaned should be disposed of in the same manner as the contents.