Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove to fresh air. Give artificial respiration if not
breathing. Get immediate medical attention.
Emergency measure - Eyes: Immediately flush eyes with running water for 15 minutes,
lifting the upper and lower eyelids occasionally. Get
immediate medical attention.
Emergency measure - Skin: Immediately wash skin with soap and water. Remove
contaminated clothing and shoes. Get immediate medical
attention if irritation persists after washing.
Emergency measure - Ingestion: Get immediate medical attention.

Fire-fighting measures

Recommended extinguishing agent: Dry chemical, carbon dioxide, dry sand.

Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg carbon oxides). However,
there is no experimental evidence to support the anticipated
combustion products.

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.


Wear appropriate personal protective equipment conforming to
the relevant national or international standards as
mentioned in section 2.3.10.


Absorb spillages of solutions with a suitable inert material
(eg sand or soil). Carefully transfer the spillage to
wastecontainers, or use a sealed industrial vacuum machine.
Containers filled with waste material must be labelled
in the same way as the original containers.



Clean the spillage area with water and detergent.


Do not discharge to drain.


Dispose of waste material by incineration in accordance with
local regulations.

Handling and storage

Handling: The substance should be stored, handled and used in
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure by contact
and inhalation.


Engineering controls are necessary to reduce exposure to the
substance.


When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipmemt should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard EN374

Chemical resistant clothing to Standard EN368

Eye protection to Standard EN166



The standards mentioned above should be regarded as a
minimum.

Storage: Store in a cool, dry, well-ventilated, flammable liquid
storage area or cabinet.


Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: 20 litre steel can and 200 litre steel drum

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: None
Transport: Not applicable to IMDG/IATA. Keep in tightly closed
container. Avoid direct sunlight, heat, shock and sources
of ignition. Handle with care.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None reported.

Dust explosion: Not applicable to a liquid.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Handling of the substance will be by trained operators and
will be kept to a minimum.


Discharge to the environment will not occur. Recovery from
minor spillages or accidental discharge is not economically
or technically feasible, and such waste material will be
disposed of by incineration. In principle, it may be
possible to recover larger spillages of uncontaminated
material for subsequent use.

Industry - Possibility of neutralisation: No chemical treatment is practicable to neutralise the
hazardous health properties.

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with
inert material (eg sand or soil) may be disposed of by
landfill at an authorised tip in accordance with local
regulations.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg carbon oxides)
could be formed.

Industry - Possibility of destruction - water purification: Should not be discharged.

Industry - Possibility of destruction - other: None known.

Public at large - Possibility of recovery/recycling: Not applicable.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: Not applicable.

Public at large - Possibility of destruction - incineration: Not applicable.

Public at large - Possibility of destruction - water purification: Not applicable.

Public at large - Possibility of destruction - others: Not applicable.