Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove subject to fresh air. Give artificial respiration if
breathing has stopped. Seek immediate medical attention.
Emergency measure - Eyes: Wash with copious amounts of water for 15-20 minutes. Seek
medical attention.
Emergency measure - Skin: Remove contaminated clothing and wash affected area with
soap and water for at least 15 minutes. Seek medical
attention if irritation develops or persists.
Emergency measure - Ingestion: Seek medical attention immediately. Rinse mouth throroughly
with water if subject is conscious.

Fire-fighting measures

Recommended extinguishing agent: Use agents appropriate for surrounding environment. Water or
foam are suitable.

Product arising from burning: Combustion may result in the formation of carbon dioxide,
carbon monoxide and oxides of nitrogen.

Product determined by test: N

Protective equipment: Use full protective clothing, with self-contained breathing
apparatus.

Accidental release measures

Emergency measures in case of spillage: Protective clothing and a respirator must be worn by
operators cleaning up any spillage.

Collect material to minimize dust generation; use wet mop,
damp sponge or wet/dry HEPA vacuum. Place collected
substance into a suitable container for disposal. Spill area
should be washed and well ventilated.

Handling and storage

Handling: Care must be taken by the operator to avoid causing the
substance to become airborne. Approved respiratory
protection to EN 136 standard must be worn while handling.
For manufacturing areas, skin protection must be provided in
the form of coveralls, or full air suits along with latex or
other impermeable gloves. Rubber, neoprene or other gloves
may be required if solvents, corrosives or other chemicals
are present. Chemical safety glasses(EN 166 personal eye
protection specification) should be worn if a full face
respirator is not being worn.

Storage: The drums used for storage are 200 litre plastic-lined fibre
drums. Store in sealed, upright containers at 15-30 °C.
Store in a dry area away from heat sources. Ensure
containers are correctly labelled.

Packaging of the substance and or preparation: UN approved 200 litre, plastic-lined fibre drums.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport: No UN number has been assigned. Use normal procedures for
transport of industrial chemicals not considered hazardous
for transport. Ensure the containers are securely held to
prevent falling over.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None known.

Chemical reaction with water: None known.

Dust explosion: The substance has been tested as a combustible dust. As with
any organic material, a suspended dust cloud of the
substance may ignite if subject to a strong ignition source
of static electricity. Provide appropriate bonding and
grounding to control static changes.

Dust explosion determined by test: Y

Disposal considerations

Industry - Possibility of recovery/recycling: BMS 183040-01 is consumed in the drug synthesis reaction in
which it is employed. Significant residue levels in the
reactor effluent are not expected. No practical means of
recovery or recycling are known.

Industry - Possibility of neutralisation: No method of neutralisation is known.

Industry - Possibility of destruction: controlled discharge: Trace quantities are destroyed by biological oxidation in
the waste water treatment plant prior to discharge to the
sewage system (defined in Annex V 'categories of recommended
measures for rendering the substance harmless' as 641 -
Removal by controlled discharge to waste water plant).

Industry - Possibility of destruction - incineration: Incineration is recommended for larger quantities. A
closed-cycle incinerator with scrubbers should be employed.
National regulations must be observed (defined in Annex V
'categories of recommended measures for rendering the
substance harmless' as 663 - Incinerate, high temperature,
long burn with blue gas scrubbing).

Industry - Possibility of destruction - water purification: Trace quantities of material (0.5%) in aqueous washes and in
other liquors will be treated in secondary biological waste
water treatment plants before discharge to sewage works.

Industry - Possibility of destruction - other: None.

Public at large - Possibility of recovery/recycling: Not applicable. The substance will not be released to the
public.

Public at large - Possibility of neutralisation: Not applicable. The substance is not intended for use by the
public.

Public at large - Possibility of destruction: controlled discharge: Not applicable.

Public at large - Possibility of destruction - incineration: Not applicable.

Public at large - Possibility of destruction - water purification: Not applicable.

Public at large - Possibility of destruction - others: Not applicable.