Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Inhalation : Move exposed persons to fresh air. Seek medical assistance in case of adverse reactions
to the product, such as chest pain, difficulty breathing, loss of consciousness and other adverse effects which may be delayed. IF BREATHING HAS STOPPED, START BASIC LIFE SUPPORT AND SEEK IMMEDIATE MEDICAL ATTENTION.

Skin contact : In the event of adverse skin reactions, remove contaminated clothing and immediately
flush affected are with copious amounts of water for at least 15 minutes. Obtain medical attention if skin reaction occurs which may be immediate or delayed. Do NOT use chemical neutralisers.

Eye contact: Immediately flush eyes with copious amounts of water for at least 15 minutes. Do NOT use chemical neutralisers. Seek medical advice.

Ingestion : In the event of swallowing, give copious amounts of water and seek medical advice. Do not induce vomiting.

Fire-fighting measures

EXTINGUISHING MEDIA: Water spray, Dry chemical, Foam or CO2.
Toxic gases formed upon combustion. ; CO, CO2, ZnO2.
Firefighters should be equipped with self-contained breathing apparatus and appropriate personal protective equipment.
Shut off all sources of ignition-heat, sparks, open flame.

Accidental release measures

Shut off all sources of ignition; No flares, smoking or flames should be present in the spillage area. The substance should be swept up (taking care to avoid dust generation; wetting is permitted if feasible) and place in a bag, and hold for waste disposal. Consult an expert on the disposal of recovered material. Remove leaking containers to a safe place, if feasible. Do not dispose of to drain or associated sewerage systems.

Handling and storage

HANDLING:
Use only in the well-ventilated areas. Do not breathe dust. Keep container tightly.
Avoid contact with skin or eyes. Wash thoroughly after handling. When using do not eat or drink.
STORAGE:
Store in a cool, well-ventilated place away from bright sunlight. Take care to avoid breakages. Keep containers upright and tightly closed when in no use. Keep away from heat, steam pipe or sunlight.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
1325
Shipping information
Proper shipping name and description:
Flamm. Solid Org., N.O.S.
Chemical name:
Bontron E-84
Language:
English
Labels:
Flamm. Solid
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not applicable.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
1325
Shipping information
Proper shipping name and description:
Flamm. Solid Org., N.O.S.
Chemical name:
Bontron E-84
Labels:
Flamm. Solid
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
1325
Shipping information
Proper shipping name and description:
Flamm. Solid Org., N.O.S.
Chemical name:
Bontron E-84
Labels:
Flamm. Solid
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

The product is not proposed to cause a hazard when used appropriately. General guidance is as follows:

Respiratory protection : Provide adequate general ventilation. If handling the "neat" toner, local exhaust ventilation should be utilised.

Hand protection : Avoid excessive exposure. Use protective gloves made of rubber or plastic should excessive exposure be unavoidable.

Eye protection : Avoid contact with eyes. Wear safety goggles in circumstances if eye is unavoidable.

Skin protection : Wear appropriate protective clothing as for hands above should excessive skin contact be unavoidable.

Stability and reactivity

Stability : The substance is considered to be stable under normal conditions of storage and use. Direct sunlight and sources of heat and ignition should be avoided. The substance does not polymerise.

Conditions to Avoid : Heat and flames.

Hazardous Decomposition or By-products : Incomplete combustion produces smoke and oxides of Zinc.

Disposal considerations

It is recommended that the waste should be burned in a chemical incinerator equipped with an afterburner and scrubber. Extra care should be exerted in igniting as this product is highly flammable. Spillages should be swept up and disposed of as special waste. Disposal to the aquatic environment should be avoided at all costs. Paper containing the toner with the product can be disposed of as normal office waste, and subject to recycling programmes as appropriate.