Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

- Following inhalation:
Move the affected person away from the contaminated area and into the fresh air.
If irritation persists, consult a physician

- Following skin contact:
Wipe off as much as possible
Remove/Take off immediately all contaminated clothing and footwear
Wash with water
If case of redness or irritation, call a physician

- Following eye contact:
Rinse immediately and thoroughly, pulling the eyelids well away from the eye (15 minutes minimum)
Always consult an eye specialist, even if there are no immediate symptoms

- Following ingestion:
Rinse mouth with water
Call medical assistance immediately and show a copy of the material safety data sheet

- Most important symptoms and effects:
Causes serious eye damage
Harmful if swallowed

Fire-fighting measures

- Suitable extinguishing media:
Water spray. Dry chemical. Powder. Alcohol resistant foam

- Unsuitable extinguishing media:
High volume water jet. Carbon dioxide (CO2)

- Special hazards arising from the substance or mixture:
Avoid whirling up material/product because of the danger of dust explosion
Not classified as flammable according to EEC criteria, but may present a risk in the event of a fire
During combustion: harmful fumes can be released

- Advice for fire fighter:
Contaminated extinguishing water must be disposed of in accordance with official regulations. Do not attempt to take action without suitable protective equipment (Self-contained breathing apparatus. Complete protective clothing)

Accidental release measures

- Personal precautions:
Avoid contact with skin and eyes. Do not breathe dust. Avoid dust formation

- Protective equipment and emergency procedures:
Do not attempt to take action without suitable protective equipment

- Environmental precautions:
Contain the spilled material by bunding. Do not discharge into drains or rivers.

- Methods and material for containment and cleaning up:
Sweep up or vacuum up the product.Wash non-recoverable remainder with large amounts of water. Recover the cleaning water for later disposal.
Dispose of materials or solid residues at an authorized site.


Handling and storage

- Precautions for safe handling:
Avoid any direct contact with the product.
Avoid raising powdered material due to explosion hazard.
Do not breathe dust.
Work in a well-ventilated area
Do not drink, eat or smoke in the workplace. Always wash hands after handling the product

- Conditions for safe storage, including any incompatibilities:
Keep container tightly closed. Store in a cool and dry place.
Incompatible materials: None to our knowledge.


Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not applicable
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not applicable
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not applicable
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not applicable
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

- Technical protection measures :
Ensure good ventilation of the work station
Eye fountain

- Organisational protection measures:
Handle in accordance with good industrial hygiene and safety practice

- Hand protection :
Impermeable protective gloves. The protective gloves to be used must comply with the specifications of EC directive 89/686/EEC and the resultant standard EN 374

- Body protection :
Due to colouring properties of the product, closed work clothes should be used to avoid stains during manipulation.

- Eye protection :
Sealed safety goggles. (EN 166)

- Respiratory protection
Suitable respiratory mask (P2)

Stability and reactivity

- Reactivity :
To our knowledge, this product does not present any particular risk, provided it is handled in accordance with good occupational hygiene and safety practice.

- Chemical stability :
Stable under normal conditions of use and storage

- Possibility of hazardous reactions :
Dust explosion hazard.

- Conditions to avoid :
Humidity

- Incompatible materials :
None to our knowledge

- Hazardous decomposition products :
No hazardous decomposition products if stored and handled as prescribed/indicated.
On combustion or on thermal decomposition (pyrolysis) releases: Carbon oxides (CO, CO2). Various hydrocarbon fragments

Disposal considerations

Dispose of in accordance with relevant local regulations.
Uncontaminated packs can be re-used. Packs that cannot be cleaned should be disposed of in the same manner as the contents.