Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Move to fresh air. In case of shortness of breath, give
oxygen. Call a physician immediately.
Emergency measure - Eyes: Flush immediately with plenty of water and consult a
specialist.
Emergency measure - Skin: Rinse with plenty of water. If skin irritaion persists call
a physician.
Emergency measure - Ingestion: Rinse mouth and give plenty of water to drink.

Call a physician or Poison Control Centre immediately.

Fire-fighting measures

Recommended extinguishing agent: All extinguishing media are suitable.

Product arising from burning: Nitrous gases, hydrochloric acid, carbon oxides.

Product determined by test: N

Protective equipment: Self-contained breathing apparatus and chemical-resistant
protective suit.

Accidental release measures

Emergency measures in case of spillage: In all cases of accidental release personal protective
equipment has to be worn.

Provide for adequate ventilation. Avoid dust formation and
remove all sources of ignition.

Do not inhale dust. Avoid contact with skin, eyes and
clothing.

Do not flush into surface water or sanitary sewer

system. Avoid subsoil penetration.

Moisten substance before taking up. Fill in sealable and
adequately labelled containers and dispose off in accordance
with local regulations.

Handling and storage

Handling: Inhalation of the substance as well as eye-and skin contact
should be avoided. Appropriate exhaust ventilation at
machinery and at places where dust can be generated has to
be provided. The extracted air should only be returned to
the work area after adequate cleaning using tested
equipment.

If technical exhaustion- or ventilation mesasures are
insufficient or not possible respiratory protection is
required (mask with suitable particle filter). To avoid skin
contact protective gloves made out nitrile rubber should be
worn and suitable protective clothing (e.g. :::) must be
worn. A safe eye protection is necessary: tightly fitting
safety goggles and full face visor or shield. Adequate
washing facilities should be available in the immediate
vicinity of the work area and eye douches should be made
available and their location indicated conspicuously. After
skin contact, the affected parts of the skin should be
cleaned thoroughly using (:::).

Use of closed systems or at least dust protected machines
for refilling, dosing and mixing. To avoid dust explosions
any dust deposits which can not be avoided have to be taken
up regularily. Static electricity discharges have to be
avoided, eg. by grounding of containers, equipments, pumps
and exhaustion devices. Eating,drinking or smoking at the
workplace is not allowed, hands to be washed before breaks
and immediately after handling the product. Contaminated
clothing has to be changed immediately.

Special skin-protection and skin-care measures are
recommended. A skin-protection plan must be drawn up.

Storage: Store in a cool and dry place in well closed and break-
resistant containers which are protected against falling
down. Containers have to be labelled correctly. Rests of
product on the containers should be avoided.

Provisions for storage of water-endangering substances have
to be observed.

Packaging of the substance and or preparation: Sealable plastic- or cardboard drums with inner plastic

bag (maximum 50 kg).

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: UN-Nr. 3261
Transport: Transport in break-resistant and properly labelled
containers protected aganist fallong down.


Further transport-codes: class 8, PG II.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None known.

Chemical reaction with water: Substance hydrolyzes but does not react vigorously with
water.

Dust explosion: Danger of dust explosion.

Dust explosion determined by test: Y

Disposal considerations

Industry - Possibility of recovery/recycling: Dissolve soiled material in a suitable solvent and purify by
repeated recrystallisation.

Industry - Possibility of neutralisation: Neutralize with soda in case of accidental release.

Industry - Possibility of destruction - incineration: Incineration plant with flue gas purification.

Public at large - Possibility of recovery/recycling: No possibility due to low amount in finished product and
chemical reaction.

Public at large - Possibility of neutralisation: No possibilities.

Public at large - Possibility of destruction - others: Cosmetic finished products which may contain rests of the
product are disposed off with household waste.