Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

- Inhalation: If symptomatic, move to fresh air. Get medical attention if symptoms occur.
- Skin contact: Immediately flush with plenty of water for at least 15 minutes and wash using soap. Get medical attention if symptoms occur.
- Eye contact: In case of contact with eyes, flush immediately with plenty of water and seek medical attention.
- Ingestion: Do not induce vomiting. Give victim a glass of water. Get medical attention immediately. Never give anything by mouth to an unconscious person.

Fire-fighting measures

- Extinguishing media: Use appropriate agent for adjacent fire.
- Special fire-fighting procedures: Wear self-contained breathing apparatus and protective clothing.
- Hazardous combustion products: None.
- Unusual fire and explosion hazards: Powdered material may form explosive dust-air mixtures.

Accidental release measures

- Personal precautions: Refer to field "Exposure controls/ personal protection"
- Environmental precautions: Collect up and put in a suitable container. Avoid dust formation. Clean surface thoroughly to remove residual contamination.
- Waste disposal: Dispose of in accordance with local regulations.

Handling and storage

- Personal precautions: Avoid breathing dust. Avoid contact with eyes, skin and clothing. Use with adequate ventilation. Wash thoroughly after handling.
- Prevention of fire and explosion: Keep from contact with oxidising materials.
- Storage: Cool conditions (5 - 30 ºC). Keep container tightly closed. Keep away from incompatible substances (strong oxidising agents).
- Ventilation: Match ventilation rates to conditions of use so as not to exceed any applicable exposure limits. Good general ventilation of 10 of more room volumes per hour in the work area is recommended.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
UN3077
Shipping information
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Substituted tert-butyl phenol oligomer)
Chemical name:
2-[[2-(acetyloxy)-3-(1,1-dimethylethyl)-5-methylphenyl]methyl]-6-(1,1-dimethylethyl)-4-methylphenol
Language:
English
Special provisions / remarks
Remarks:
The package in your possession may carry a different version of the label depending on the date of manufacture. Depending on inner packaging quantities and packaging instructions, it may be subject to specific regulatory exceptions. Please consult product packaging for further details.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
UN3077
Shipping information
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Substituted tert-butyl phenol oligomer)
Chemical name:
2-[[2-(acetyloxy)-3-(1,1-dimethylethyl)-5-methylphenyl]methyl]-6-(1,1-dimethylethyl)-4-methylphenol
Marine pollutant
Special provisions / remarks
Remarks:
The package in your possession may carry a different version of the label depending on the date of manufacture. Depending on inner packaging quantities and packaging instructions, it may be subject to specific regulatory exceptions. Please consult product packaging for further details.

Air transport (UN RTDG/ICAO/IATA)

UN number:
UN3077
Shipping information
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Substituted tert-butyl phenol oligomer)
Chemical name:
2-[[2-(acetyloxy)-3-(1,1-dimethylethyl)-5-methylphenyl]methyl]-6-(1,1-dimethylethyl)-4-methylphenol
Special provisions / remarks
Remarks:
The package in your possession may carry a different version of the label depending on the date of manufacture. Depending on inner packaging quantities and packaging instructions, it may be subject to specific regulatory exceptions. Please consult product packaging for further details.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

- Occupational exposure controls: Not established
- Ventilation: Avoid exposure to mists and vapours by mixing solutions in closed vessels and/or under local exhaust ventilation. Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions.
- Respiratory protection: In case of insufficient ventilation wear suitable respiratory protection.
- Eye protection: Wear safety glasses with side shields (or goggles).
- Skin and body protection: Seek the advice of the glove supplier as to the most suitable glove material. Avoid contact when mixing or handling the substance/preparation or a mixture by wearing impervious gloves and protective clothing appropriate to the risk of exposure.

Use chemical resistant gloves. In case of prolonged immersion or frequently repeated contact:
- Nitrile rubber ( ≥ 0.38 mm thick; > 480 min breakthrough time)
- Neoprene ( ≥ 0.65 mm thick; > 240 min breakthrough time)
- Butyl rubber (≥ 0.36 mm thick; > 480 min breakthrough time).

Avoid natural rubber gloves. The protective glove used must comply with the specifications of the EC directive 89/686/EEC and the resultant standard EN 374.
- Recommended decontamination facilities: Safety shower, eye wash, washing facilities as appropriate to condition of use.

Stability and reactivity

- Stability: Stable under normal conditions. No exotherm to 400 ºC by HPDSC
- Incompatibility: strong oxidising agents.
- Hazardous decomposition products: None under normal conditions of use.
- Hazardous polymerisation: Hazardous polymerisation does not occur.

Disposal considerations

- Dispose according to the local regulations or guidelines that apply to the category of waste. Ensure the use of properly authorised waste management companies.
- Waste material: Waste material is currently classified as hazardous under Council Directive 91/689/EEC. The European Waste Catalogue Code is 09 01 99 Wastes not otherwise specified. Dispose according to the local regulations or guidelines that apply to the category of waste. Ensure the use of properly authorised waste management companies.
- Product containers: If thoroughly cleaned, preferably by rinsing at least three times with small quantities of water, waste product packaging may be consigned for recovery or disposal as non hazardous waste. The European Waste Catalogue Code is 15 01 02 plastic packaging. Waste product packaging contaminated by residues of hazardous contents should be consigned for disposal as hazardous waste. In this case, the European Waste Catalogue Code is 15 01 10 packaging containing residues of or contaminated by dangerous substances.

Categories Display