Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 210-838-0
CAS number: 624-24-8
Take off all contaminated clothing immediately.
Remove to fresh air. If symptoms persist, call a physician.
After contact with skin, wash immediately with plenty of soap and water. If skin reactions occur, contact a physician.
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
If swallowed, seek medical advice immediately and show this container or label.
Suitable extinguishing media:
Water spray jet, Foam, Dry powder, Carbon dioxide (CO2), Carbon monoxide (CO)
Vapours may form explosive mixtures with air.
Unsuitable extinguishing agents:
High volume water jet
Fire may cause evolution of: Carbon oxide
Special protective equipment for fire-fighters:
In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.
Use personal protective equipment.
Do not flush into surface water or sanitary sewer system.
Methods for cleaning or taking up:
Cover spilt product with liqiud-binding material (sand, silica gel, acid binder, universal binder, hybilat). Take up mechanically and fill into labelled, closed containers.
Further accidental release measures:
Keep away from/remove sources of ignition.
Avoid formation of aerosol. Only handle product with local exhaust ventilation. Avoid contact with skin, eyes and clothing.
Fire and explosion protection:
Take measures to prevent the build up of electrostatic charge. Keep away from open flames, hot surfaces and sources of ignition.
For storage suitable stores with adequate product-reception volume must be used. During handling local official regulations must be observed in
order to avert impairment of water by the product.
This intermediate is handled under Strictly Controlled Conditions in accordance with the ECHA REACH Guidance on Intermediates. Site documentation to demonstrate safe handling arrangements in accordance with risk-based management systems is available at each Manufacturing site.
Personal protective equipment
Respiratory protection: respirator with P3 filter
Eye protection: safety glasses with side-shields
Hand protection: During the handling of the substance according to the intended use protection gloves from nitrile rubber have been proved. During the handling of pure solid substances or powder mixtures a permeation of the rubber material is not to be expected. In case of doubt, especially
during handling of the substance together with organic solvents, the stability of the protection gloves has to be clarified with the manufacturer.
Skin and body protection: Choose body protection according to the amount and concentration of the dangerous substance at the work place.
Condition to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents
Hazardous reactions with: Bases, Acids, Oxidizing agents, Vapours may form explosive mixture with air.
Product: Dispose of as special waste in compliance with local and national regulations
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again