Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: - Immediately move to fresh air, seek medical attention and
notify supervisor.
Emergency measure - Eyes: - Immediately flush eyes thouroughly with water, seek
medical attention and notify supervisor.
Emergency measure - Skin: - Immediately wash thouroughly with soap and water for 15

minutes seek medical attention and notify supervisor.
Emergency measure - Ingestion: - Drink two glasses (8-12 oz. or 250 ml) of water, seek
medical attention immediately and notify supervisor.

Fire-fighting measures

Recommended extinguishing agent: - Water, dry powder, foam, carbon dioxide

Product arising from burning: - Not known.

Product determined by test: N

Protective equipment: - Wear full protective clothing and NIOSH/MSHA-approved,

positive pressure, self-contained breathing apparatus.

Decontaminate all equipment after use.

Accidental release measures

Emergency measures in case of spillage: - If material is released or spilled, cordon off spill area.

Take proper precautions to minimize exposure by using

appropriate personal protective equipment. Full face mask
with self-contained breathing apparatus, acid resistant
gloves and disposable tyveck suits must be worn. For
small spills of solids, do not attempt to sweep up dry
materials use water or an appropriate solvent to dilute
and clean up. Soak up material with paper towels and wash
spill area thouroughly with soap and water. For larger
spills, wet down spilled material with water or an
appropriate solvent to minimize dust generation. Scoop
into suitable containers appropriate for either recovery
or disposal to avoid exposure and to comply with
applicable waste disposal regulations. Alternatively,

use an industrial vacuum cleaner equipped with a high
efficiency particulate filter. Remove filter and dispose
of it in a manner to avoid exposure and to comply with
applicable waste disposal regulations.

Handling and storage

Handling: - Avoid generation of dust. Handle in enclosed or contained
process equipment with effective local exhaust ventilation
with appropriate filtering units to remove all
particulates. During transfer of substance to enclosed
process equipment full face shields with air purifying
respiratory equipment must be worn, along with rubber
gloves and disposable suits to minimize potential for eye,
skin and respiratory exposure.

Storage: - Store upright in sealed and secure polylined fiberboard
containers that meet the international shipping

standards and regulations. Store in a well ventilated
warehouse or equivalent that meets current fire protection
standards, at room temperature.


Dust residue on outside of containers should be avoided.

If necessary the container may be swabbed with a damp

cloth to remove any traces of dust before storage.

Packaging of the substance and or preparation: - 50 kg substance is packed in plasticsack and in 100 l

fiber drums.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: - Not assigned per U.S. DOT or IATA
Transport: Transport in well sealed suitable containers (polyethylene

sacks in fiberboard drums conforming to UN standards). The

containers should be secured to prevent falling over.

Containers are labelled in accordance with pertinent

regulations.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: - Not known.

Chemical reaction with water: - None.

Dust explosion: Not to be expected if handled under good industrial

hygiene pratice.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: - Recovery/recycling of the substance is not possible.

Industry - Possibility of neutralisation: - Not applicable.

Industry - Possibility of destruction: controlled discharge: - Not recommended; see incineration.

Industry - Possibility of destruction - incineration: - The waste is dissolved in a suitable solvent and inciner-
ated in a suitable plant.

Industry - Possibility of destruction - water purification: - Not recommended; see incineration.

Industry - Possibility of destruction - other: - None.

Public at large - Possibility of recovery/recycling: - The substance will not be released to the public.

Public at large - Possibility of neutralisation: - Not applicable.

Public at large - Possibility of destruction: controlled discharge: - Not applicable.

Public at large - Possibility of destruction - incineration: - Not applicable.

Public at large - Possibility of destruction - water purification: - Not applicable.

Public at large - Possibility of destruction - others: - Not applicable.