1,1-dimethyl-N,N'-bis(1-methylpropyl)silanediamine

Partition coefficient

Link to relevant study record(s)

Reference

Reference 1

Endpoint:

partition coefficient

Data waiving:

study technically not feasible

Justification for data waiving:

the study does not need to be conducted because the substance decomposes

Reference 2

Endpoint:

partition coefficient

Type of information:

(Q)SAR

Adequacy of study:

key study

Reliability:

2 (reliable with restrictions)

Rationale for reliability incl. deficiencies:

results derived from a valid (Q)SAR model and falling into its applicability domain, with adequate and reliable documentation / justification

Justification for type of information:

See attached QMRF/QPRF

Principles of method if other than guideline:

The result was obtained using an appropriate QSAR method (see attached QMRF and QPRF for details).

The model is the publicly available KOWWIN v1.68 program (USEPA 2011). KOWWIN is part of EPI Suite v4.1 and may be downloaded from http://www.epa.gov/oppt/exposure/pubs/episuite.htm. The model is based on fragment values. That is, the chemical structure is broken down into its constituent functional groups, and the contribution of each group toward the overall partition coefficient is calculated. The constants used within KOWWIN have been derived by SRC from a wide range of organic chemicals. The authors of this QMRF have carried out additional validation and found the method to be applicable to organosilicon compounds, excluding di- and tri-alkoxysilanes.

USEPA 2011. KOWWIN v. 1.68, US EPA. 2011. Estimation Programs Interface Suite™ for Microsoft® Windows, v 4.10. United States Environmental Protection Agency, Washington, DC, USA. Available at http://www.epa.gov/oppt/exposure/pubs/episuite.htm.

Partition coefficient type:

octanol-water

Key result

Type:

log Pow

Partition coefficient:

-0.4

Temp.:

20 °C

pH:

ca. 7

Conclusions:

An octanol-water partition coefficient value of -0.4 was obtained using an accepted calculation method. The result is considered to be reliable.

Description of key information

Log K_ow [ 1,1-dimethyl-N,N'-bis(1-methylpropyl)silanediamine]: not relevant

Log K_ow [dimethylsilanediol]: -0.4 at 20°C (QSAR)

Log K_ow [sec -butylamine]: 0.74

Additional information

The requirement to conduct an n-octanol/water partition coefficient for the registered substance is waived because in contact with water the substance hydrolyses very rapidly to form dimethylsilanediol (CAS No. 1066-42-8) and sec-butylamine (CAS No. 13952-84-6).

The log K_ow of the silanol hydrolysis product, dimethylsilanediol has been predicted to be -0.4 at 20°C using a validated QSAR estimation method.

A partition coefficient value of 0.74 was reported for sec-butylamine (Hansch et al 1995).

Reference:

Hansch, C., Leo, A., D. Hoekman (1995). Exploring QSAR - Hydrophobic, Electronic, and Steric Constants. Washington, DC: American Chemical Society., 1995., p. 10