Registration Dossier

Administrative data

First-aid measures

4.1 Description of first aid measures
General advice
: Remove contaminated clothing and shoes.
Ensure that the First Aid Personnel are aware of the product involved, and take precautions to protect themselves (e.g. wear personal protection equipment).

If inhaled
: If inhaled, remove to fresh air.
Get medical advice/ attention.

In case of skin contact
: In case of contact, immediately flush skin with plenty of water.

In case of eye contact
: In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

If swallowed
: If swallowed do not induce vomiting,seek medical advice and show safety datasheet or label

4.2 Most important symptoms and effects, both acute and delayed
Symptoms
:
No symptoms known currently.

Risks
:
None known.

4.3 Indication of any immediate medical attention and special treatment needed
Treatment
:
Treat symptomatically.

Fire-fighting measures

5.1 Extinguishing media
Suitable extinguishing media
: Water spray jet
Foam

Unsuitable extinguishing media
: High volume water jet

5.2 Special hazards arising from the substance or mixture
Specific hazards during fire-fighting
: In case of fire hazardous decomposition products may be produced such as:
Carbon monoxide
Carbon dioxide (CO2)

5.3 Advice for firefighters
Special protective equipment for firefighters
: Self-contained breathing apparatus Full protective suit

Further information
: Cool endangered containers with water spray jet.
Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
Do not disperse powdered product in air.

Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures
Personal precautions
:
Ensure adequate ventilation.
Wear suitable protective equipment.
Keep away sources of ignition.
Information regarding Safe handling, see chapter 7.
For personal protection see section 8.
Information regarding Waste Disposal, see chapter 13.

6.2 Environmental precautions
Environmental precautions
: Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
The product should not be allowed to enter drains, water courses or the soil.

6.3 Methods and material for containment and cleaning up
Methods for cleaning up
: Pick up mechanically. Rinse away rest with water.
Avoid dust formation.
Take measures to prevent the build up of electrostatic charge.
Risk of dust explosion.
Treat recovered material as described in the section "Disposal considerations".

6.4 Reference to other sections
For disposal considerations see section 13., For personal protection see section 8.

Handling and storage

7.1 Precautions for safe handling
Advice on safe handling
: Handle and open container with care.
Avoid dust formation.
Avoid dust accumulation in enclosed space.
Provide adequate ventilation.
Take measures to prevent the build up of electrostatic charge.

Advice on protection against fire and explosion
: Dust can form an explosive mixture in air.
Keep away sources of ignition.
Take precautionary measures against build-up of electrostatic charges, e.g earthing during loading and off-loading operations.
Observe the general rules of industrial fire protection

Hygiene measures
: Wash hands before breaks and at the end of workday.
Use protective skin cream before handling the product.
Take off immediately all contaminated clothing and wash it before reuse.
Do not eat, drink or smoke when using this product.

Dust explosion class
: No data available

7.2 Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers
: Keep only in the original container.

Further information on stor-age conditions
: Keep container tightly closed.
Keep away sources of ignition.

Advice on common storage
: Avoid storage near incompatibile agents (see section 10).
Do not store or transport together with foodstuffs

7.3 Specific end use(s)
Specific use(s)
: No further recommendations.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

8.1 Control parameters
Predicted No Effect Concentration (PNEC) according to Regulation (EC) No. 1907/2006:
No data available

8.2 Exposure controls
Engineering measures
Local ventilation recommended - mechanical ventilation may be used.
Personal protective equipment
Eye protection
: Safety glasses

Hand protection
Remarks
: Long-term exposure
Impervious butyl rubber gloves


For short-term exposure (splash protection):
Nitrile rubber gloves.

Skin and body protection
: working clothes

Respiratory protection : Use respiratory protection unless adequate local exhaust ventilation is provided or exposure assessment demonstrates that exposures are within recommended exposure guidelines.
P2 filter

Protective measures
: Observe the usual precautions for handling chemicals.
Ensure that eyewash stations and safety showers are close to the workstation location.
Avoid contact with skin and eyes.
Do not breathe dust.

Stability and reactivity

10.1 Reactivity
See section 10.3. "Possibility of hazardous reactions"
10.2 Chemical stability
Stable under normal conditions.
10.3 Possibility of hazardous reactions
Hazardous reactions
: No dangerous reaction known under conditions of normal use.
Risk of dust explosion.
Stable

10.4 Conditions to avoid
Conditions to avoid
: Keep away from heat.
Keep away from open flames, hot surfaces and sources of ignition.

10.5 Incompatible materials
Materials to avoid
: Strong acids and strong bases
Strong oxidizing agents

10.6 Hazardous decomposition products
Hazardous decomposition products
:
Carbon monoxide and carbon dioxide
Nitrous oxides (NOx)

Disposal considerations

13.1 Waste treatment methods
Product
: Product should be be taken to a suitable and authorized waste disposal site in accordance with relevant regulations and if necessary after consultation with the waste disposal operator and/or the competent Authorities

Contaminated packaging
: Packaging that cannot be cleaned should be disposed of as product waste