Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Endpoint summary

Administrative data

Description of key information

Appearance / physical state / colour:

The appearance of 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride was observed as off white yellow to brown colored solid organic compound.

Melting point/ Freezing point:

The melting point of 3-(2,6-dichlorophenyl)-5-methylisoxazole-4-carbonyl chloride was determined as 94-96 °C.

Boiling point:

The boiling point of 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride was predicted as 390.9 ± 42.0 °C at 760 mmHg.

Density:

The density of chemical 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride was estimated to be 1.472 ± 0.06 g/cm3, at 20 °C and 760 mmHg pressure.

Particle size distribution (Granulometry):

The particle size distribution of 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride was determined by granulometric analysis with rotap sieve shaker. The particle size distribution was determined to be in the range of 149 micron to 53 micron.

Vapour pressure:

The estimated vapour pressure of the substance 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride at 25 deg C was 0.0004 Pa.

Partition coefficient:

Octanol water partition coefficient of the 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride (CAS no. 4462-55-9) was estimated. The estimated log POW of the 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride was 3.26. On the basis of estimated value, the 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride can be considered as hydrophillic in nature.

Water solubility:

The estimated water solubility of substance 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride at 25 deg C was  22.98 mg/l

Surface tension:

The surface tension for chemical 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride was predicted to be 48.9 ± 3.0 dyne/cm.

Flash point:

The flash point of 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride was estimated as 190.2 ± 27.9 °C.

Autoflammability:

3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride did not catch fire on being exposed to air at room temperature of 27°C pressure of 966 hPa. This indicates that 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride is not auto-flammable.

Flammability:

3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride does not indicate any ignition when the flame of bunsen burner having temperature of approximately 950°C is brought in contact with it. Thus it can be concluded that 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride is not flammable at high temperature. However since such high temperatures are not found under normal circumstances of transportation and use, thus 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride was considered non-flammable for chemical safety assessment.

Explosiveness:

The study does not need to be conducted because there are no chemical groups present in the molecule which are associated with explosive properties.

Oxidising properties:

The study does not need to be conducted because there are no chemical groups present in the molecule which are associated with oxidizing properties and hence the classification procedure does not need to be applied.

Additional information

Appearance / physical state / colour:

Based on available data from obtained reports, the appearance of 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride was observed as off white yellow to brown colored solid organic compound.

Melting point/ Freezing point:

Based on available data from Material safety data sheet, the melting point of 3-(2,6-dichlorophenyl)-5-methylisoxazole-4-carbonyl chloride was determined as 94-96 °C.

Other supporting study from material safety data sheet, also supported the melting point of 3-(2,6-dichlorophenyl)-5-methylisoxazole -4-carbonyl chloride was determined in the range of 92 -95 °C, closer to the selectd key value.

Boiling point:

Based on prediction done using ACD/I-Lab 2.0 and Scifinder, the boiling point of 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride was predicted as 390.9 ± 42.0 °C at 760 mmHg.

Density:

Based on prediction done using ACD/I-Lab 2.0 and Scifinder, the density of chemical 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole -4-carbonyl chloride was estimated to be 1.472 ± 0.06 g/cm3, at 20 °C and 760 mmHg pressure.

Particle size distribution (Granulometry):

The particle size distribution of 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride was determined by granulometric analysis with rotap sieve shaker. The particle size distribution was determined to be in the range of 149 micron to 53 micron.

Vapour pressure:

Modified Grain method (Mean of Antoine and Modified Grain methods) was used to estimate the vapour pressure of the substance 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride using MPBPVP v1.43 of EPI SUITE.

The estimated vapour pressure of the substance 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride at 25 deg C was0.0004Pa.

Partition coefficient:

Octanol water partition coefficient of the 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride (CAS no. 4462-55-9) was estimated. The estimated log POW of the 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride was 3.26. On the basis of estimated value, the 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride can be considered as hydrophillic in nature.

Water solubility:

WSKOW v1.42 was used to estimate the water solubility of substance 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride.

The estimated water solubility of the substance 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride at 25 deg C was 22.98 mg/l.

Based on the estimated value, the test substance 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride was considered to be slightly soluble in water.

Surface tension:

Based on the prediction done by ACD labs Software (v12.1.0.50375), the surface tension for chemical 3-(2,6-dichlorophenyl)-5-methyl -1,2-oxazole-4-carbonyl chloride was predicted to be 48.9 ± 3.0 dyne/cm.

Flash point:

Based on available data from authoritative database Scifinder, the flash point of 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride was estimated as 190.2 ± 27.9 °C.

Thus accroding to estimated value the given chemical was not classified as flammable.

Autoflammability:

3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride did not catch fire on being exposed to air at room temperature of 27°C pressure of 966 hPa. This indicates that 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride is not auto-flammable.

Flammability:

3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride does not indicate any ignition when the flame of bunsen burner having temperature of approximately 950°C is brought in contact with it. Thus it can be concluded that 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole -4-carbonyl chloride is not flammable at high temperature. However since such high temperatures are not found under normal circumstances of transportation and use, thus 3-(2,6-dichlorophenyl)-5-methyl-1,2-oxazole-4-carbonyl chloride was considered non-flammable for chemical safety assessment.

Explosiveness:

The study does not need to be conducted because there are no chemical groups present in the molecule which are associated with explosive properties.

Oxidising properties:

The study does not need to be conducted because there are no chemical groups present in the molecule which are associated with oxidizing properties and hence the classification procedure does not need to be applied.