Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 269-075-7 | CAS number: 68187-15-5 An inorganic pigment that is the reaction product of high temperature calcination in which praseodymium (III) oxide, praseodymium (IV) oxide, silicon oxide, and zirconium (IV) oxide in varying amounts are homogeneously and ionically interdiffused to form a crystalline matrix of zircon. Its composition may include any one or a combination of the modifiers alkali or alkaline earth halides.
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://www.echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_toxicological-information.png)
Endpoint summary
Administrative data
Link to relevant study record(s)
- Endpoint:
- basic toxicokinetics in vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2020-08-0 to 2021-02-17
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Reason / purpose for cross-reference:
- reference to other study
- Reason / purpose for cross-reference:
- reference to same study
- Objective of study:
- absorption
- other: lung clearance
- Qualifier:
- according to guideline
- Guideline:
- other: OECD Guideline 413 (90-day (Subchronic) Inhalation Toxicity Study)
- Version / remarks:
- 2018-06-25
- Deviations:
- yes
- Remarks:
- Ophthalmology not performed (this endpoint is not sensitive in particle studies); urine analysis not performed (endpoint optional in guideline)
- GLP compliance:
- yes (incl. QA statement)
- Remarks:
- GLP certificate signed 2018-11-22.
- Specific details on test material used for the study:
- STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material: at room temperature, dry, protected from light. - Radiolabelling:
- no
- Species:
- rat
- Strain:
- Wistar
- Remarks:
- Wistar (Han)
- Sex:
- male
- Details on test animals or test system and environmental conditions:
- TEST ANIMALS
- Source: Charles River Deutschland, Sulzfeld, Germany
- Females nulliparous and non-pregnant: yes
- Age at study initiation: approx. 8 weeks
- Weight at study initiation: approx. 280 g for males and approx. 180 g for females
- Housing: housed in polycarbonate Makrolon cages type III with softwood (‘ssniff KB 8-15’) bedding material.
- Diet (ad libitum): commercial chow in pellet form (ssniff “V1534”; supplier: ssniff Spezialdiäten GmbH, Soest, Germany).
- Water (ad libitum): tap water
- Acclimation period: approx. one week the animals will be allowed to adjust and become acclimatised to the Fraunhofer ITEM environment. During the 2-3 weeks prior exposure start, all rats will be trained to the 6-hour restraint in nose-only tubes.
ENVIRONMENTAL CONDITIONS
- Temperature (°C): 22 ± 2
- Humidity (%): 55 ± 15
- Photoperiod (hrs dark / hrs light): 12 / 12 - Route of administration:
- inhalation: aerosol
- Vehicle:
- unchanged (no vehicle)
- Remarks:
- filtered air
- Details on exposure:
- TYPE OF INHALATION EXPOSURE: nose only
GENERATION OF TEST ATMOSPHERE / CHAMBER DESCRIPTION
- Exposure apparatus: flow-past nose-only inhalation exposure system
- Method of holding animals in test chamber: restrain tubes with a flexible stopper.
- System of generating particulates/aerosols: The particulate sample aerosols were generated by dry dispersion with pressurized air. Cyclones (in line) were used to reduce the coarse moiety of the aerosol. For each nose-only exposure unit, the aerosol was generated by a high-pressure pneumatic disperser. The disperser was fed with the test/reference items under computerized control, i.e. with a feed back loop to the actual aerosol concentrations measured by an aerosol photometer. The photometer gives a scattering light signal which is proportional to the particle concentration, if the particle size distribution is constant. The ratio between photometer signal and concentration was determined throughout the study by comparing to gravimetric concentrations.
- Temperature, humidity, pressure in air chamber: Parameters were recorded by 20-minute means The were set at 22°C + 2°C for temperature and 55% + 15% for relative humidity.
- Air flow rate: 1 L/min
- Method of particle size determination: The MMAD was determined three to four times (once before exposure start and once per month during the exposure period for each test item exposure unit (3 units) by a cascade impactor (Marple impactor).
- Treatment of exhaust air: exhaled air is drawn off immediately by a cylinder surrounding the aerosol delivery cylinder
TEST ATMOSPHERE
- Brief description of analytical method used: Filter samples of the aerosols were taken daily to control the aerosol concentrations and to calibrate the aerosol photometers. The means are close to the target concentrations.
- Samples taken from breathing zone: yes - Duration and frequency of treatment / exposure:
- 13 weeks (65 exposure days), 6 hours/day, 5 days/week
- Dose / conc.:
- 0.6 mg/m³ air (analytical)
- Remarks:
- SD: ± 0.08 mg/m³; 0.1 mg/lung (calculated total dose using MPPD v3.04)
- Dose / conc.:
- 2.5 mg/m³ air
- Remarks:
- SD: ± 0.38 mg/m³; 0.4 mg/lung (calculated total dose using MPPD v3.04)
- Dose / conc.:
- 9.99 mg/m³ air (analytical)
- Remarks:
- SD: ± 0.94 mg/m³; 1.7 mg/lung (calculated total dose using MPPD v3.04)
- No. of animals per sex per dose / concentration:
- 15 males: 5 males (1 day recovery), 5 males (28 days recovery), and 5 males (90 days recovery)
- Control animals:
- yes, concurrent vehicle
- Positive control reference chemical:
- none
- Details on study design:
- - Dose selection rationale: The concentrations were defined based on the preceding intratracheal instillation dose range finding (DRF A) study (Fraunhofer ITEM no. 02 N 20 502).
- Post-exposure recovery period: 1, 28, and 90 days
The nominal aerosol concentrations of 0.6, 2.5 and 10 mg/m³ were selected to achieve lung burden at the highest concentration that is at or above the lung overload conditions, i.e. impaired lung clearance. The test item deposition in the respiratory tract was modeled using the MPPD model (version 3.04), resulting in a deposited fraction of 4.7% (rel. density=5.1, MMAD/GSD=1.8 µm/1.5).
This deposited fraction was used to calculate the total deposited mass, using the following input parameters:
Morphometry: Semi-symmetric Long Evans
Example for deposited mass at 0.6 mg/m³: 0.2 l minute breathing volume x 360 min exposure/day x 65 exposure days x 0.6 mg/m³ x 4.7% = 0.13 mg/lung
Example for deposited mass at 2.5 mg/m³: 0.2 l minute breathing volume x 360 min exposure/day x 65 exposure days x 2.5 mg/m³ x 4.7% = 0.55 mg/lung
Example for deposited mass at 10 mg/m³: 0.2 l minute breathing volume x 360 min exposure/day x 65 exposure days x 10 mg/m³ x 4.7% = 2.2 mg/lung
Retained mass at 10 mg/m³: approx. 1.7 mg/lung - Details on dosing and sampling:
- TOXICOKINETIC / PHARMACOKINETIC STUDY (Absorption)
- Tissues and body fluids sampled: lungs
- Time and frequency of sampling: 1, 28, and 90 days after the 90-day exposure period
ANALYTICAL METHOD
- Complete description including: lungs of 5 male rats in all exposure groups were subjected to a chemical analysis to verify the predicted retained mass of the test items after 90 days of inhalation 1, 28 and 90 recovery days. For recovery days +1 and +28 whole lungs were available. On +90 days the right lung lobe was available for analysis. Here a conversion factor of 1.67 was applied to extrapolate the lung burden to the whole lung. Between animal sacrifice and sample preparation samples were stored at -20 °C. Prior to microwave digestion lung tissue samples underwent a freeze-drying step (approx. 48 h), followed by plasma ashing (approx. 48 h, cool plasma conditions). Samples were transferred into Pt-crucible and underwent high-temperature fusion using Na2CO3 and Na2B4O7. The melt was taken up in 5 N HCl, with the final sample volume being 50 mL. After appropriate dilution (see raw data) with deionised water samples were analysed by ICP-MS. Since hydrofluoric acid (HF) was used for digest H3BO3 was added during sample dilution (see raw data). Quantification was achieved against matrix matched standards. To ensure validity of the analysis data, samples were bracketed by QC standards.
Parameter/Setting:
System: icap Q (ThermoScientific) or icap TQ in single quadrupole mode (ThermoScientific);
Autosampler: Cetac ASX 520 or ESI 4DX;
Interface: High matrix;
Mode: KED (Helium);
Plasma [W]: 1.550;
Spray chamber: Cyclonic;
Number of main runs: 5;
Analytes (m/z) (Qualifier; Quantifier): 141Pr;
Internal standards (m/z): Chromium: 115In, 175Lu.
Limit of quantification: 0.25 µg Pr/lung - Statistics:
- Differences between groups will be considered statistically significant at p < 0.05. Data will be analysed using analysis of variance. If the group means differ significantly by the analysis of variance, the means of the treated groups will be compared with the means of the control groups using Dunnett’s test. The statistical evaluation of the histopathological findings will be done with the two-tailed Fisher test by the PROVANTIS system.
- Preliminary studies:
- A dose range finding study by intratracheal instillation was conducted. For further information please refer to the study record in section 7.2.4.
- Type:
- absorption
- Results:
- Lung burden with zirconium praseodymium yellow zircon after 1, 28, and 90 days after the 90-day exposure period:
- control: < LOQ;
- 0.6 mg/m3: 252, 149 and 84 µg/lung;
- 2.5 mg/m3: 1475, 1280 and 1161 µg/lung;
- 9.99 mg/m3: 5247, 4760 and 3868 µg/lung. - Type:
- other: lung clearance half-time
- Results:
- after exposure to 0.6 mg zriconium praseodymium yellow zircon: 59.2 days
- Type:
- other: lung clearance half-time
- Results:
- after exposure to 2.5 mg zriconium praseodymium yellow zircon: 277.2 days
- Type:
- other: lung clearance half-time
- Results:
- after exposure to 9.99 mg zriconium praseodymium yellow zircon/m3: 210.0 days
- Details on absorption:
- For detailed information of absorption in lung tissue please refer to the filed "overall remarks, attachments".
- Details on distribution in tissues:
- not examined
- Details on excretion:
- not examined
- Metabolites identified:
- not measured
- Enzymatic activity measured:
- not examined
- Bioaccessibility (or Bioavailability) testing results:
- not examined
- Conclusions:
- Male rats were exposed to concentrations of 0.6, 2.5 and 9.99 mg zirconium praseodymium yellow zircon/m3 air for 6 hours per day, 5 days/week for 90 days via nose-only inhalation. The lung burden and clearance with zirconium praseodymium yellow zircon were determined 1, 28 and 90 days after the 90-day exposure period.
One day, 1 month and 3 months after end of exposure, in the low dose groups 0.25, 0.15 and 0.08 mg/lung, in the mid dose groups 1.48, 1.28 and 1.16 mg/lung, and in the high dose groups 5.25, 4.76 and 3.87 mg/lung of the test item Zirconium Praseodymium Yellow Zircon (Pigment 5) were determined, respectively.
The clearance half-time of the test item amounted to 59 days in the low dose group, thus was very close to the physiological half-time of approx. 60 days (ECETOC; 2013) or 50.5 days (median over all 5 sub-chronic inhalation toxicity studies, low-dose animals). In the mid and high dose group, half-times of 277 and 210 days, respectively, were determined, being well above a 4- to 5-fold increase as compared to the physiological values of 50.5 or 60 days. The concentration-dependent increase in clearance half-times is indicative for a poorly soluble low toxicity (PSLT) particle, which may lead to a lung overload condition, i.e. impaired clearance in which the deposited dose of inhaled PSLT in the lung overwhelms clearance from the alveolar region leading to a reduction in the ability of the lung to remove particles. The prolongation of the clearance half-time of two or more-fold above the physiological value in the high dose group demonstrates that an overload of particle clearance condition has been reached (Driscoll and Borm, 2020). - Endpoint:
- basic toxicokinetics in vitro / ex vivo
- Remarks:
- Bioaccessibility - transformation/dissolution in artificial physiological media
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- comparable to guideline study
- Objective of study:
- other: Bioaccessibility
- Qualifier:
- equivalent or similar to guideline
- Guideline:
- OECD Series on Testing and Assessment No. 29 (23-Jul-2001): Guidance document on transformation/dissolution of metals and metal compounds in aqueous media
- Deviations:
- yes
- Remarks:
- Bioaccessibility testing: loading of 100 mg/L; five artificial physiological media agitated at 100 rpm, at 37 °C ± 2 °C; sampling after 2h and 24h; determination of Pr, Si and Zr concentrations after filtration by AAS-GF and ICP-OES
- Principles of method if other than guideline:
- Solubility of test item in simulated human fluids. Principle of test is similar to Transformation/Dissolution testing according to OECD Series 29 (2001)
- GLP compliance:
- no
- Species:
- other: in vitro (simulated human body fluids)
- Details on exposure:
- The test item was exposed to five different test media at a pH range from 1.7 to 7.4. The following synthetic biological fluids were used:
• Gamble’s solution (GMB, pH 7.4) which mimics the interstitial fluid within the deep lung under normal health conditions (de Meringo et. Al. 1994).
• Phosphate-buffered saline (PBS, pH 7.2), which is a standard physiological solution that mimics the ionic strength of human blood serum. It is widely used in the research (e.g. Norlin et al, 2002) and medical health care community (e.g. Hanawa et al, 2004, Okazaki and Gotoh, 2005) as a reference test solution for comparison of data under simulated physiological conditions.
• Artificial sweat (ASW, pH 6.5) which simulates the hypoosmolar fluid, linked to hyponatraemia (loss of Na+ from blood), which is excreted from the body upon sweating. The fluid is recommended in the available standard for testing of nickel release from nickel containing products (EN 1811, 1998).
• Artificial lysosomal fluid (ALF, pH 4.5), which simulates intracellular conditions in lung cells occurring in conjunction with phagocytosis and represents relatively harsh conditions (Moss 1979).
• Artificial gastric fluid (GST, pH 1.7), which mimics the very harsh digestion milieu of high acidity in the stomach (Hamel et al, 1998; ASTM, 2003).
The test media were selected in order to simulate human exposure as far as possible, e.g. skin contact. Ingestion to the gastro-intestinal tract can either be direct, or previously inhaled particles can be translocated from the respiratory tract to the gastro-intestinal tract by mucociliary clearance. It should be stressed though, that the different test media only simulate physiological conditions to a limited extent, as the complexity and function of the real body fluids are difficult to simulate. However, in vitro results in such synthetic biological media can, in a simple way, provide information that could be relevant for a real situation.
The test solutions were prepared using ultra-pure water and chemicals of analytical grades.
The pH of ALF and GMB was adjusted using 50 % NaOH and 25 % HCl, respectively. The pH of ASW and PBS was adjusted with 1% ammonia solution and 50 % NaOH, respectively.
Artificial gastric fluid, pH 1.6, was prepared according to the ASTM standard using 4 g of 25 % HCl solution diluted with ultra -pure water to 1 L (ASTM D5517, 2003). - Duration and frequency of treatment / exposure:
- Samples were taken after 2 h and 24h.
- Dose / conc.:
- 100 other: mg of the test item /L artificial media
- Details on study design:
- Experimental Procedure
Triplicate samples were prepared for exposure in different test media, each for two different time periods. In addition, one blank sample (without addition of test item) containing only the test solution was incubated together with the triplicate samples for each time period. 5 ± 0.5 mg of the test item was weighed using a Mettler AT20 balance with readability of 2 μg, and placed in a PMP Nalgene® jar. 50 mL of the test solution (no adjustment of solution volume to powder mass was made) was then added to the Nalgene® jar containing the test item, before incubated in a Platform- Rocker incubator SI 80 regulated at 37 ± 2 °C. The solution was gently shaken (bi-linearly) with an intensity of 25 cycles per minute for 2 and 24 hours, respectively. - Details on dosing and sampling:
- A “standard loading” of 0.1 g/L was selected, which has some physiological relevance. It further allows a comparison of the generated data with results from the OECD Transformation/Dissolution test (OECD, 2001) and similar bioaccessibility tests conducted with other materials under the same conditions .
The time periods for exposure of the test item were selected to have some relevance to the inhalation/ingestion scenario and to enable comparison with other reported metal release/dissolution data generated for similar time periods. The approximate time for the gastric phase of digestion is about 2 hours, and therefore this exposure time period was considered relevant for testing in artificial gastric fluid (Hamel et al, 1998). The
24 hour exposure was selected as a standard time duration that is relatively easy to compare with existing metal release/dissolution data as well as toxicity data for further evaluation of the bioaccessibility of released metals. Moreover, it can be assumed that human exposure to particles last no longer than 24 hours at ambient conditions.
After exposure, the samples were allowed to cool to ambient room temperature before the final pH of the test solution was measured. The test medium was then separated from the powder particles by centrifugation at 10000 rpm for 10 minutes, resulting in a visually clear supernatant with remaining particles in the bottom of the centrifuging tube. Dynamic light scattering, (Malvern Zetasizer nano ZS instrument) was used to confirm the successful removal of all pigment particles. The supernatant solution was decanted into a polypropylene storage flask and acidified to a pH less than 2 (not needed in the case of artificial gastric fluid) with 65 % pure HNO3 prior to solution analysis - Type:
- other: Bioaccessibility
- Results:
- Highest dissolution at a loading of 0.1 g/L after 24 hours: Zr: 2.4 ± 0.8 µg/L (ALF), Si: 62.7 ± 5.8 µg/L (GST), Pr: 574 ± 18 µg/L (GST); after 2 hours: Zr: 1.5 µg/L (ASW), Si: 36.7 ± 3.0 µg/L (ALF), Pr: 348 ± 123 µg/L (GST)
- Conclusions:
- As highest dissolved Zr, Si and Pr concentrations were below 2.4 µg/L (ALF, 24h), 62.7 µg/L (GST, 24h) and 574 µg/L (GST, 24h), respectively, even at the highest loading of 0.1 g/L, referring to a solubility of 0.0024 %, 0.063 % and 0.574 %, respectively, the pigment is considered biologically inert.
- Executive summary:
The bioaccessibility of zirconium praseodumium yellow zircon has been investigated experimentally in vitro by simulating dissolution under physiological conditions considered to mimic the most relevant exposure routes (oral, dermal and inhalation), as follows:
- Gamble’s solution (GMB, pH 7.4) which mimics the interstitial fluid within the deep lung under normal health conditions,
- Phosphate-buffered saline (PBS, pH 7.2), which is a standard physiological solution that mimics the ionic strength of human blood serum,
- Artificial sweat (ASW, pH 6.5) which simulates the hypoosmolar fluid, linked to hyponatraemia (loss of Na+ from blood), which is excreted from the body upon sweating,
- Artificial lysosomal fluid (ALF, pH 4.5), which simulates intracellular conditions in lung cells occurring in conjunction with phagocytosis and represents relatively harsh conditions and
- Artificial gastric fluid (GST, pH 1.5), which mimics the very harsh digestion milieu of high acidity in the stomach.
The dissolution of zirconium of the test item zirconium praseodumium yellow zircon is at a loading of 0.1 g/L in a range of <LOD (GMB, PBS, GST) and 1.5 µg/L (ASW) after 2 hours and below 2.4 µg/L (ALF) after 24 hours.
The dissolution of silicium of the test item zirconium praseodumium yellow zircon is at a loading of 0.1 g/L in a range of <blank (GMB, ASW) and 36.7 µg/L (ALF) after 2 hours and below 62.7 µg/L after 24 hours.
The dissolution of praesodymium of the test item zirconium praseodumium yellow zircon is at a loading of 0.1 g/L in a range of <LOD (GMB) and 348 µg/L (GST) after 2 hours and below 574 µg/L after 24 hours.
Therefore, zirconium praseodumium yellow zircon may reasonably be considered not bioaccessible.
- Endpoint:
- basic toxicokinetics, other
- Remarks:
- mass balance
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2015-03-01 to 2015-03-04
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- test procedure in accordance with generally accepted scientific standards and described in sufficient detail
- Objective of study:
- other: mass balance
- Qualifier:
- no guideline followed
- Principles of method if other than guideline:
- Groups of 5 male and 5 female Crl:CD(SD) rats were dosed orally with a singel administration of zirconium praseodymium yellow zircon, vehicle (0.8 % aqueous hydroxyl propyl methylcellulose gel), or reference item (praseodymium chloride) via gavage. Clinical signs, mortality and body weight were recorded. Furthermore, urine and faeces of all animals were collected in metabolic cages after administration (sampling period: 0 - 24 hours, 24 - 48 hours, and 48 - 72 hours). Lastly, gross pathology was conducted and organ weights were determined.
- GLP compliance:
- yes (incl. QA statement)
- Remarks:
- signed 2014-05-14
- Specific details on test material used for the study:
- STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material: at room temperature, keep dry in a tightly closed container - Radiolabelling:
- no
- Species:
- rat
- Strain:
- other: Crl:CD(SD)
- Details on species / strain selection:
- The rat is a commonly used rodent species for toxicity studies.
- Sex:
- male/female
- Details on test animals or test system and environmental conditions:
- TEST ANIMALS
- Source: Charles River Laboratories Germany GmbH, Sandhofer Weg 7, 97633 Sulzfeld, Germany
- Age at dosing: males: 48 days; females: 53 days
- Weight at dosing: males: 234.7 - 263.7 g; females: 183.4 - 221.3 g
- Housing (exception: sampling period): kept singly in MAKROLON cages (type III plus) with a basal surface of approx. 39 cm × 23 cm and a height of approx. 18 cm; bedding material: granulated textured wood (Granulat A2, J. Brandenburg, 49424 Goldenstedt, Germany)
- Diet (ad libitum): commercial ssniff® R/M-H V1534 (ssniff Spezialdiäten GmbH, 59494 Soest, Germany)
- Water (ad libitum): drinking water
- Acclimation period: 11 days
ENVIRONMENTAL CONDITIONS
- Temperature: 22 °C ± 3 °C (maximum range)
- Relative humidity: 55% ± 15% (maximum range)
- Photoperiod (hrs dark / hrs light): 12/12 - Route of administration:
- oral: gavage
- Vehicle:
- other: zirconium praseodymium yellow zircon: 0.8% aqueous hydroxyl propyl methylcellulose gel; reference item (praseodymium chloride): water
- Details on exposure:
- PREPARATION OF DOSING SOLUTIONS:
1) Zirconium praseodymium yellow zircon
The test item formulations were freshly prepared on the administration day by dissolving the test item in the vehicle to the appropriate concentrations. During and after preparation the formulation was stirred and the homogeneity of the suspension was checked by visual appraisal.
Administration volume: 10 mL/kg bw
The administration formulations were continuously agitated by stirring throughout the entire administration procedure.
The amount of the test item was adjusted to the animal's current body weight on the administration day.
2) Reference item (Praseodymium chloride (purity: 99.99 %)
The following dose was administered to the rats via gavage:
70 mg praseodymium chloride/kg bw
The test item formulations were freshly prepared on the administration day by dissolving the reference items in the vehicle to the appropriate concentrations. During and after preparation the formulation was stirred and the homogeneity of the suspension was checked by visual appraisal.
Administration volume: 10 mL/kg bw
The administration formulations were continuously agitated by stirring throughout the entire administration procedure.
The amount of the reference item was adjusted to the animal's current body weight on the administration day. - Duration and frequency of treatment / exposure:
- single administration
- Dose / conc.:
- 1 000 mg/kg bw/day (actual dose received)
- No. of animals per sex per dose / concentration:
- 5 males / 5 females
- Control animals:
- yes, concurrent vehicle
- Positive control reference chemical:
- none
- Details on study design:
- - Dose selection rationale: the dose levels for this study have been selected after consultation with the Sponsor based on available toxicity data:
The oral LD50 value for the reference item was as follows:
The oral LD50 value for praseodymium chloride is not available; oral bioavailability of soluble Pr substance is given in the public domain with <1%.
The test item oral dose of 1000 mg/kg bw corresponds to the limit dose used in a separate 28-day oral toxicity study and is considered to be the maximum feasible dose. Based on the chemical composition of the test item, a dose of 1000 mg/kg bw of zirconium praseodymium yellow zircon equates to a dose of 40 mg Pr/kg bw, corresponding to a dose of 70 mg PrCl3/kg bw (anhydrous compounds).
The dose level for the reference item praseodymium chloride has been confirmed in a preliminary experiment (non-GLP) employing two animals per group (please also refere to IUCLID Section 7.1.1: k_Leuschner_2017_ in vivo). No toxicity was observed. - Details on dosing and sampling:
- TOXICOKINETIC / PHARMACOKINETIC STUDY (Absorption, distribution, excretion)
- Tissues and body fluids sampled: urine and faeces
- Time and frequency of sampling: all animals of the test item, vehicle and reference item groups were scheduled for urine and faeces sampling. After the single administration, the animals were kept in metabolism cages. Urine and faeces were collected in 3 fractions/animal (sampling periods: 0 - 24 hours, 24 - 48 hours, and 48 - 72 hours).
The urine and faeces weight per collection fraction and animal were determined upon removal of the sample fraction.
All samples were frozen at -20°C or colder and stored at this temperature until analysis.
OBSERVATIONS
- clinical signs: before and after dosing as well as regularly throughout the working day (7.30 a.m. to 4.30 p.m.) and on Saturdays and Sundays (8.00 a.m. to 12.00 noon; final check at approx. 4.00 p.m).
- mortality: early in the morning and again in the afternoon of each working day as well as on Saturdays and Sundays (final check at approx. 4.00 p.m).
- body weight: at the time of group allocation and on the day of administration
GROSS PATHLOLOHY / HISTOPATHOLOGY
- Necrospy and macroscopic inspection: on test day 4 (approx. 72 hours after the administration) the animals were dissected.
The animals were sacrificed, weighed, dissected, and inspected macroscopically.
All superficial tissues were examined visually and by palpation and the cranial roof was removed to allow observation of the brain, pituitary gland, and cranial nerves. After ventral midline incision and skin reflection all subcutaneous tissues were examined. The condition of the thoracic viscera was noted with due attention to the thymus, lymph nodes and heart.
The abdominal viscera were examined before and after removal; the urinary bladder was examined externally and by palpation. The gastro-intestinal tract was examined as a whole. The stomach and caecum were incised and examined. The lungs were removed and all pleural surfaces examined under suitable illumination. The liver and the kidneys were examined. Any abnormalities in the appearance and size of the gonads, adrenal glands, uterus, intra-abdominal lymph nodes, and accessory reproductive organs were recorded.
The weight of the following organs of all animals was determined: adrenal gland (2), brain, heart, kidney (2), liver, lungs, lymph nodes (cervical (1), mesenteric (1)), ovary (2), pituitary, prostate, spleen, testicle (2), thymus, and thyroid (1) (including parathyroids).
Paired organs were weighed individually and identified as left or right.
TEST ITEM FORMULATION ANALYSIS
Remaining administration formulations (approx. 5 mL) of each test and reference item that were mixed with a vehicle were stored at ≤-20°C until analysis (number of samples: 2). - Statistics:
- The test item-treated and reference item-treated groups were compared statistically to the vehicle control group.
The following statistical method was used:
Multiple t-test based on DUNNETT, C. W. New tables for multiple comparisons with a control. Biometrics, 482-491 (Sept 1964): body weight / relative and absolute organ weights (p ≤ 0.01 and p ≤ 0.05) - Preliminary studies:
- Please refer to the field "Details on study design" above.
- Details on absorption:
- Urinary excretion for Pr and Zr was negligible and below 0.00001%.
- Details on excretion:
- Animals that received 1000 mg pigment /kg bw excreted 102% Pr and 74.3% Zr of the administered dose via urine and faeces during the first three days after exposure (mean for 10 animals). Within the first 24 hours approximately 100% of Pr and 74.3% Zr were excreted via faeces as largest fraction. Further 1.75% and 0.14% (Pr) were excreted via faeces on the second and third day.
Urinary excretion for Pr was negligible and below 0.00001%. - Conclusions:
- Overall the mass balances for Pr and Zr is essentially complete and indicates that the element contained in the pigment "Zirconium praseodymium yellow zircon", present as Pr3+ and Zr4+ are not absorbed in the gastrointestinal tracts to any significant extent, but pass the animal effectively unchanged.
- Executive summary:
Animals that received 1000 mg pigment /kg bw excreted 102% Pr and 74.3% Zr of the administered dose via urine and faeces during the first three days after exposure (mean for 10 animals). Within the first 24 hours approximately 100% of Pr and 74.3% Zr were excreted via faeces as largest fraction. Further 1.75% and 0.14% (Pr) were excreted via faeces on the second and third day.
Urinary excretion for Pr was negligible and below 0.00001%.
Approximately 67.5 % of the administered dose for Pr and 72.8% for Zr were determined indirectly by weighing the undigested pigment which could visually be observed and isolated in/from the faeces residues of the 0-24 h samples after the digestion procedure in highly acidic media in an ultrasonic bath.
Samples for the 28-48 and 48-72 hour intervals did not show any obvious pigment residues (see pictures attached to this robust study summary “K_Leuschner_2019_mass balance”) which is in line with the observations received from other pigment studies that the majority of the pigment doses are excreted within the first 24 hours.
Since Zr4+has a very low absorbance ability within the g.i. tract (<1%) a hypothesis that this fraction was contained in the exsanguinated blood of the animals or has distributed to the organs seems not appropriate.
Overall the mass balances for Pr and Zr is essentially complete and indicates that the element contained in the pigment "Zirconium praseodymium yellow zircon", present as Pr3+ and Zr4+ are not absorbed in the gastrointestinal tracts to any significant extent, but pass the animal effectively unchanged.
- Endpoint:
- basic toxicokinetics in vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2015-03-09 to 2015-03-12
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Objective of study:
- toxicokinetics
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 417 (Toxicokinetics)
- Version / remarks:
- 2010-07-22
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Remarks:
- signed 2014-05-14
- Specific details on test material used for the study:
- STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material: at room temperature, kept dry and stored in a tightly closed container. - Radiolabelling:
- no
- Species:
- rat
- Strain:
- other: Crl:CD(SD)
- Details on species / strain selection:
- The rat is a commonly used rodent species for toxicity studies.
- Sex:
- male/female
- Details on test animals or test system and environmental conditions:
- TEST ANIMALS
- Source: Charles River Laboratories, Research Models and Services, Germany GmbH, Sandhofer Weg 7, 97633 Sulzfeld, Germany
- Age at dosing: males: 45 days; females: 52 days
- Weight at dosing: males: 206 - 233 g; females: 192 - 214 g
- Housing: kept singly in MAKROLON cages (type III plus) with a basal surface of approx. 39 x 23 cm and a height of approx. 18 cm; bedding material: granulated textured wood (Granulat A2, J. Brandenburg, 49424 Goldenstedt, Germany)
- Diet (ad libitum): commercial ssniff® R/M-H V1534 (ssniff Spezialdiäten GmbH, 59494 Soest, Germany)
- Water (ad libitum): drinking water
- Acclimation period: 5 days
ENVIRONMENTAL CONDITIONS
- Temperature: 22°C ± 3°C (maximum range)
- Relative humidity: 55% ± 15% (maximum range)
- Photoperiod (hrs dark / hrs light): 12/12 - Route of administration:
- other: zirconium praseodymium yellow zircon: oral (gavage); reference item (praseodymium chloride): oral (gavage) and intravenously injected
- Vehicle:
- other: zirconium praseodymium yellow zircon: 0.8% aqueous hydroxyl propyl methylcellulose gel; reference item (praseodymium chloride): water (gavage) or water for injection (intravenously injected)
- Details on exposure:
- PREPARATION OF DOSING SOLUTIONS:
1) Zirconium praseodymium yellow zircon:
The test item formulation was freshly prepared on the administration day by dissolving the test item in the vehicle to the appropriate concentrations.
2) Reference item (Praseodymium chloride (purity: 99.99 %))
The reference item formulation was freshly prepared on the administration day by dissolving the reference item in the vehicle to the appropriate concentrations.
The following dosages of the reference item were administered:
a) oral administration: 70 mg praseodymium chloride/kg bw
b) intravenous administration: 0.7 mg praseodymium chloride/kg bw
The administration formulations were continuously agitated by stirring throughout the entire administration procedure.
Administration volume (oral administration / intravenous administration): 10 mL/kg bw
Injection speed (intravenous adminsitration): dose per approx. 15 seconds
The amount of test item and reference item was adjusted to each animal's current body weight on the administration day. - Duration and frequency of treatment / exposure:
- single administration
- Dose / conc.:
- 1 000 mg/kg bw/day (actual dose received)
- No. of animals per sex per dose / concentration:
- 5 males / 5 females
- Control animals:
- no
- Positive control reference chemical:
- none
- Details on study design:
- - Dose selection rationale: the dose levels for this study had been selected after consultation with the Sponsor based on available toxicity data:
The oral LD50 value for the reference item was as follows:
The oral LD50 value for praseodymium chloride is not available in the public domain; oral bioavailability of soluble Pr substance is given in the public domain with <1%.
The test item oral dose of 1000 mg/kg bw corresponds to the limit dose used in a separate 28-day oral toxicity study, which is considered the maximum feasible dose. Based on the chemical composition of the test item, a dose of 1000 mg/kg b.w. of zirconium praseodymium yellow zircon equates to a dose of 40 mg Pr/kg, corresponding to a dose of 70 mg PrCl3/kg bw. (anhydrous compounds).
The dosage for the reference item administered by intravenous injection was set 1% of the dose of the test item on a stoichiometric basis for each metal, thereby lowering the dose for reasons of tolerability of the test animals. This equates to a dose of 0.4 mg Pr/kg bw, corresponding to a dose of 0.7 mg PrCl3/kg bw (anhydrous compounds).
The dose levels for the reference item praseodymium chloride (oral (gavage) and intravenously injected) have been confirmed in a preliminary experiment (non-GLP) employing two animals per group. No toxicity was observed. - Details on dosing and sampling:
- TOXICOKINETIC / PHARMACOKINETIC STUDY (Absorption, distribution, excretion)
- Tissues and body fluids sampled: plasma
- Time and frequency of sampling: blood was collected 0 (predose), 1, 2, 4, 8, 12, 24, 48, and 72 hours after administration. The whole blood samples were cooled using an IsoTherm-Rack system until centrifugation. Immediately after centrifugation, the plasma was frozen at ≤-20°C, and stored at this temperature until analysis.
In addition, 4 mL pooled blank plasma (approx. 2 mL per sex) were obtained from spare animals.
A toxicokinetic evaluation of the data on zirconium praseodymium yellow zircon plasma levels will be performed. A non-compartment model will be employed. The following parameters will be determined, if possible:
AUC0-inf = extrapolated area from zero to infinity
AUC0-t last = extrapolated area from time zero to the last quantifiable plasma concentration >LOQ
Kel = elimination rate constant
t½ = elimination half-life
Cmax values will be the highest measured plasma concentrations, and tmax values will be the time points of highest plasma concentrations.
Elimination rate constants (Kel) and plasma elimination half-lives (t½) will be calculated by linear regression analysis of the log/linear portion of the individual plasma concentration-time curves (c = concentration, t = time).
Area under the curve (AUC) values will be calculated using the linear trapezoidal method and extrapolated to infinite time by dividing the last measurable plasma concentration by the elimination rate constant. Plasma concentrations at time zero will be taken to be those at the first blood sampling time.
Furthermore, AUC0-t last-value will be calculated according to the linear trapezoidal rule. Values below or at the limit of quantification (LOQ) will be excluded from the calculation.
In addition, the bioavailability will be calculated for the mixture.
OBSERVATIONS
- clinical signs: before and after dosing as well as regularly throughout the working day (7.30 a.m. to 4.30 p.m.) and on Saturdays and Sundays (8.00 a.m. to 12.00 noon; final check at approx. 4.00 p.m).
- mortality: early in the morning and again in the afternoon of each working day as well as on Saturdays and Sundays (final check at approx. 4.00 p.m).
- body weight: at the time of group allocation and on the administration day.
TEST ITEM FORMULATION ANALYSIS
The remaining administration formulations of each test and reference item that was mixed with a vehicle were stored at ≤- 20°C (approximately 5 mL per formulation, in total 3 samples). - Statistics:
- The reference item-treated group (oral administration) was compared to the test item treated group.
The following statistical method was used:
STUDENT's t-test: body weight (p ≤ 0.01 and p ≤ 0.05)
The following limits were used:
p = 0.05 / 0.01 about t = 2.3060 / 3.3554
(for 8 degrees of freedom) - Preliminary studies:
- Please refer to the field "Details on study design" above.
- Toxicokinetic parameters:
- other: bioavailability
- Remarks:
- The relative bioavailability of orally administered pigment was determined in relation to a soluble Pr3+compound (PrCl3) injected i.v... Result: relative bioavailability 0.000011% (Pr).
- Bioaccessibility (or Bioavailability) testing results:
- For Pr an absolute bioavailability of 0.000055%% (mean m/f) was calculated from soluble PrCl3 following oral administration compared to intravenous administration, and a relative bioavailability of approximately 0.000011% (mean m/f) for Pr present in the pigment.
- Conclusions:
- In a relative bioavailability study, the relative bioavailability of orally administered pigment was calculated relative (0.000011% (Pr)) in relation to a soluble Pr3+ compound (PrCl3) injected i.v..
- Executive summary:
In conclusion, the oral relative bioavailability of the pigment "Zirconium praseodymium yellow zircon" can be assumed to be negligible. The absolute bioavailability of orally administered soluble Pr3+compound (PrCl3) in relation to soluble Pr3+compound (PrCl3), injected i.v. was calculated to be 0.000055% (Pr). A relative bioavailability of orally administered pigment was calculated as 0.000011% (Pr).
Referenceopen allclose all
BET-analysis:
The specific surface area, measured by BET-analysis is 0.52 m²/g. It should be underlined that this specific surface area is measured by nitrogen absorption and includes also the surface of surface pores.
Abbreviations:
GMB: Gamble´s solution, PBS: phosphate buffered saline, ASW: artificial sweat, ALF: artificial lysosomal fluid, GST: gastric fluid.
Average total concentration of released elements [μg/L] and the standard deviation of triplicate samples in the different media. Blank values for each individual media and exposure period have been subtracted.
(test item) | Exposure | GMB | PBS | ASW | ALF | GST |
Material | period | pH 7.4 | pH 7.2 | pH 6.5 | pH 4.5 | pH 1.7 |
ZrSiPr | 2 h | < LOD | < LOD | 1.5 | 0.9 | < LOD |
Zr release | 24 h | < LOD | < LOD | < LOD | 2.4 ± 0.8 | 2.0 |
ZrSiPr | 2 h | < blank | 25.8 ± 7.4 | < blank | 36.7 ± 3.0 | 26.8 ± 10.9 |
Si release | 24 h | < blank | 6.3 ± 30.2 | 9.0 ± 3.0 | 3.8 ± 1.9 | 62.7 ± 5.8 |
ZrSiPr | 2 h | < LOD | 12.6 | 140 ± 118 | 17.3 | 348 ± 123 |
Pr release | 24 h | < LOD | < LOD | 141 ± 96 | 57.4 ± 70.2 | 574 ± 18 |
Release rate of elements given by the BET surface area [μg/cm² h].
(test item) | Exposure | GMB | PBS | ASW | ALF | GST |
Material | period | pH 7.4 | pH 7.2 | pH 6.5 | pH 4.5 | pH 1.7 |
ZrSiPr | 2 h | < LOD | < LOD | 0.0014 | 0.0008 | < LOD |
Zr release | 24 h | < LOD | < LOD | < LOD | 0.0002 ± 0.0001 | 0.0002 |
ZrSiPr | 2 h | < blank | 0.026 ± 0.0075 | < blank | 0.034 ± 0.0036 | 0.025 ± 0.010 |
Si release | 24 h | < blank | 0.0005 ± 0.0025 | 0.0008 ± 0.0003 | 0.0003 ± 0.0002 | 0.0050 ± 0.0005 |
ZrSiPr | 2 h | < LOD | 0.013 | 0.14 ± 0.11 | 0.017 | 0.33 ± 0.12 |
Pr release | 24 h | < LOD | < LOD | 0.012 ± 0.0078 | 0.0046 ± 0.0056 | 0.046 ± 0.0017 |
Released/dissolved amount of elements per total amount of loaded material [μg/μg].
(test item) | Exposure | GMB | PBS | ASW | ALF | GST |
Material | period | pH 7.4 | pH 7.2 | pH 6.5 | pH 4.5 | pH 1.7 |
ZrSiPr | 2 h | < LOD | < LOD | 0.00002 | 0.000009 | < LOD |
Zr release | 24 h | < LOD | < LOD | < LOD | 0.00003 ± 0.000008 | 0.00002 |
ZrSiPr | 2 h | < blank | 0.0003 ± 0.00008 | < blank | 0.0004 ± 0.00004 | 0.0003 ± 0.0001 |
Si release | 24 h | < blank | 0.00007 ± 0.00031 | 0.00009 ± 0.00003 | 0.00004 ± 0.00002 | 0.0006 ± 0.00006 |
ZrSiPr | 2 h | < LOD | 0.0001 | 0.0014 ± 0.0012 | 0.0002 | 0.0035 ± 0.0012 |
Pr release | 24 h | < LOD | < LOD | 0.0015 ± 0.001 | 0.0006 ± 0.0007 | 0.0057 ± 0.0002 |
Elements transformed [mass %], equivalent to their percentage of the elemental content of the total amount of particles loaded; shown as average of triplicate samples in the different media. Blank values for each individual media and exposure period have been subtracted.
(test item) | Exposure | GMB | PBS | ASW | ALF | GST |
Material | period | pH 7.4 | pH 7.2 | pH 6.5 | pH 4.5 | pH 1.7 |
ZrSiPr | 2 h | < LOD | < LOD | 0.0015 | 0.0009 | < LOD |
Zr release | 24 h | < LOD | < LOD | < LOD | 0.0025 ± 0.0008 | 0.002 |
ZrSiPr | 2 h | < blank | 0.027 ± 0.0079 | < blank | 0.036 ± 0.0038 | 0.027 ± 0.011 |
Si release | 24 h | < blank | 0.0068 ± 0.031 | 0.0094 ± 0.0031 | 0.0039 ± 0.0019 | 0.063 ± 0.014 |
ZrSiPr | 2 h | < LOD | 0.013 | 0.14 ± 0.12 | 0.018 | 0.35 ± 0.12 |
Pr release | 24 h | < LOD | < LOD | 0.15 ± 0.098 | 0.058 ± 0.070 | 0.57 ± 0.02 |
Total released/dissolved amount of elements per total amount of loaded material [μg/μg] in %.
Exposure | GMB | PBS | ASW | ALF | GST | |
Test item | time | pH 7.4 | pH 7.2 | pH 6.5 | pH 4.5 | pH 1.7 |
ZrSiPr | 24 h | < LOD | 0.007 ± 0.031 | 0.16 ± 0.10 | 0.065 ± 0.073 | 0.64 ± 0.03 |
Elements transformed [mass %], equivalent to the percentage of the released element compared to its amount within the amount of particles loaded.
(test item) | Exposure | GMB | PBS | ASW | ALF | GST |
Material | period | pH 7.4 | pH 7.2 | pH 6.5 | pH 4.5 | pH 1.7 |
ZrSiPr | 2 h | < LOD | < LOD | 0.0035 ± 0.0004 | 0.0020 ± 0.004 | < LOD |
Zr release | 24 h | < LOD | < LOD | < LOD | 0.0058 ± 0.0018 | 0.0046 ± 0.0011 |
ZrSiPr | 2 h | < blank | 0.17 ± 0.049 | < blank | 0.23 ± 0.024 | 0.17 ± 0.067 |
Si release | 24 h | < blank | 0.042 ± 0.19 | 0.058 ± 0.019 | 0.024 ± 0.012 | 0.39 ± 0.039 |
ZrSiPr | 2 h | < LOD | 0.34 | 3.6 ± 3.0 | 0.44 | 8.7 ± 3.1 |
Pr release | 24 h | < LOD | < LOD | 3.7 ± 2.5 | 1.5 ± 1.8 | 14.5 ± 0.53 |
CLINICAL SIGNS, MORTALITY, BODY WEIGHT, AND GROSS PATHOLOGY
- none of the rats treated once orally with 1000 mg Zirconium praseodymium yellow zircon/kg bw or 70 mg Praseodymium chloride/kg bw showed any changes in behaviour or external appearance.
- faeces of control and test and reference item-treated animals were normally formed.
- none of the rats died prematurely.
- individual body weights ranged from 234.7 to 263.7 g for the male animals and from 183.4 to 221.3 g for the female animals on test day 1 and were within the expected range.
- no changes were noted for the animals treated once orally with 1000 mg Zirconium praseodymium yellow zircon/kg bw or 70 mg Praseodymium chloride/kg bw at macroscopic inspection at necropsy.
- no test or reference item-related changes in relative and absolute organ weights were noted for the male and female rats treated with 1000 mg Zircon praseodymium yellow zircon/kg bw or 70 mg Praseodymium chloride/kg bw.
Statistically significant differences (p ≤ 0.05) in relative and absolute organ weights compared to the control which are not considered to be test item-related are given below:
females (reference item; test day 4): increased relative left kidney weight
males (test item; test day 4): increased absolute left testis weight
LOCAL TOLERANCE (REFERENCE ITEM; INTRAVENOUS ADMINISTRATION)
No signs of local intolerance reactions were noted at the injection sites of the rats treated once intravenously with 0.7 mg praseodymium chloride/kg bw.
CLINICAL SIGNS, MORTALITY, AND BODY WEIGHT
Zirconium praseodymium yellow zircon:
None of the rats treated once orally with 1000 mg Zircon praseodymium yellow zircon/kg bw showed any changes in behaviour or external appearance.
The faeces of the animals were normally formed.
None of the rats died prematurely.
Body weight of all animals was in the expected range on test day 1.
Reference item (oral administration):
None of the rats treated once orally with 70 mg Praseodymium chloride/kg bw showed any changes in behaviour or external appearance.
The faeces of the animals were normally formed.
None of the rats died prematurely.
Body weight of all animals was in the expected range on test day 1.
Reference item (intravenous administration):
None of the rats treated once intravenously with 0.7 mg Praseodymium chloride/kg bw showed any changes in behaviour or external appearance.
The faeces of the animals were normally formed.
None of the rats died prematurely.
Body weight of all animals was in the expected range on test day 1.
Description of key information
The in-vitro and in-vivo experiments described above are in very good agreement with regards to the negligible level of bioavailability of the elements Zr and Pr contained in the pigment.
(1) In in-vitro dissolution experiments in five different artificial physiological media, : the highest dissolved Zr, Si and Pr concentrations were below 2.4 µg/L (24h, ALF), 62.7 µg/L (24h, ALF) and 574 µg/L (24h, GST), respectively, even at the highest loading of 0.1 g/L, referring to a solubility of 0.0024 %, 0.063 % and 0.574 %, respectively. Thus, the pigment is considered biologically inert. The dissolved Zr, Pr and Si concentrations from this pigment in GST, after 2h hours (2-hour gastric passage) were below LoD, 350 μg/L and 30 μg/L, respectively, even at the highest loading of 0.1g/L, corresponding to a solubility of less than 0.4 %.
(2) In a 28-day oral toxicity study with 1,000 mg/kg pigment no increase in Zr and Pr plasma and urine concentrations were observed when sampled at the end of the 28-day exposure period. From a final dose of 1,000 mg/kg of the pigment that the animals received on the last day of the study, only cumulated relative amounts of << 0.001 % (m/f) were found in the terminal 24-h urine collection period.
(3) In a mass balance study with a single oral dose of 1,000 mg/kg of the pigment, 102 % Pr of the dose and 74.3 % Zr were excreted via faeces within 3 days, with only <0.00001 % Pr and < 0.00002% Zr of the dose being excreted via urine at the same time.
(4) In a bioavailability study, the absolute (0.000055 % (Pr)) and relative (0.000011 % (Pr)) bioavailability of orally administered pigment was calculated in relation to a soluble Pr3+ compound (PrCl3), injected i.v..
Comparing the findings of in-vitro dissolution testing (1) with in-vivo results (2-4), the in-vivo data consistently demonstrates slightly lower bioavailability. This is in agreement with the general understanding that in-vitro experiments in simulated gastric juice provide a conservative estimate of actual (in-vivo) bioavailability.
In conclusion, the oral relative bioavailability of the pigment "Zirconium praseodymium yellow zircon" can be assumed to be negligible, as demonstrated in three independent in-vivo studies in rats yielding very comparably results supported by an in-vitro dissolution experiment in five different artificial physiological media.
A rounded value of <<0.01 % for oral absorption can be taken forward from (i) terminal urine/plasma sampling in a study involving 28 repeated oral doses of 1,000 mg pigment/kg bw/d (<<0.001 % for Pr) and (ii) a mass balance study involving a single dose of 1,000 mg pigment/kg bw (0.00003 % for Pr and <<0.00001 % for Zr).
Key value for chemical safety assessment
- Bioaccumulation potential:
- no bioaccumulation potential
Additional information
The toxicity data in this registration dossier refer explicitly to the pigment Zirconium praseodymium yellow zircon and document its negligible bioavailability and the complete lack of any human health hazard. Experiments on the bioavailability of the pigment are summarised and discussed in this section.
Summary of in-vitro bioaccessibility experiments (Herting, Wallinder, 2010)
The chemical and physiological properties of the pigment Zirconium praseodymium yellow zircon are characterised by inertness because of the specific synthetic process (calcination at high temperatures, approximately 1000 °C), rendering the substance to be of a unique, stable crystalline structure in which all atoms are tightly bound and not prone to dissolution in environmental and physiological media. This manufacturing process leads to a very low bioaccessibility of the elements contained in the pigment. This has been investigated experimentally in vitro by simulating dissolution under physiological conditions considered to mimic the most relevant exposure routes (oral, dermal and inhalation), as follows:
1.) Gamble’s solution (GMB, pH 7.4) which mimics the interstitial fluid within the deep lung under normal health conditions,
2.) Phosphate-buffered saline (PBS, pH 7.2), which is a standard physiological solution that mimics the ionic strength of human blood serum,
3.) Aartificial sweat (ASW, pH 6.5) which simulates the hypoosmolar fluid, linked to hyponatraemia (loss of Na+ from blood), which is excreted from the body upon sweating,
4.) Artificial lysosomal fluid (ALF, pH 4.5), which simulates intracellular conditions in lung cells occurring in conjunction with phagocytosis and represents relatively harsh conditions and
5.) Artificial gastric fluid (GST, pH 1.7), which mimics the very harsh digestion milieu of high acidity in the stomach.
The dissolution of zirconium from the test item Zirconium praseodymium yellow zircon was in a range of < LoD and 1.5 μg/L (pH 6.5) after 2 hours and in a range of < LoD and 2.4 μg/L (pH 4.5) at a loading of 0.1g/L after 24 hours.
Further, the dissolution of praseodymium from the test item Zirconium praseodymium yellow zircon was in a range of < LoD (pH 7.4) and 348 μg/L (pH 1.7) after 2 hours and in a range of < LoD (pH 7.2 and 7.4) and 574 μg/L (pH 1.7) at a loading of 0.1g/L after 24 hours.
Dissolution of Si was determined to be < blank (pH 6.5 and 7.4) and 36.7 μg/L (pH 4.5) after 2 hours and in a range of < blank (pH 7.4) and 62.7 μg/L (pH 1.7) at a loading of 0.1g/L after 24 hours.
In conclusion, since the highest dissolved Zr, Si and Pr concentrations from this pigment were below 2.4 µg/L (24h, ALF), 62.7 µg/L (24h, GST) and 574 µg/L (24h, GST), respectively, even at the highest loading of 0.1 g/L, referring to a solubility of 0.0024 %, 0.063 % and 0.574 %, respectively, the pigment is considered biologically inert. The dissolved Zr, Pr and Si concentrations from this pigment in GST, after 2h hours (2-hour gastric passage) were below LoD, 350 μg/L and 30 μg/L, respectively, even at the highest loading of 0.1g/L, corresponding to a solubility of less than 0.4 %.
Toxicokinetic screening data from a 28 day repeated dose oral toxicity study (Leuschner, 2019)
In a 28 day repeated dose toxicity study, male and female rats were given a daily dose of the pigment "Zirconium praseodymium yellow zircon" of 1,000 mg/kg bw/day via gavage. Individual urine samples were collected from all animals prior to sacrifice in one cumulated 24-h fraction/animal after the last oral application, and blood samples were collected from each animal upon sacrifice. The plasma and urine samples were analysed for total zirconium and praseodymium content.
The uptake of zirconium and praseodymium during a 24 hour urine and plasma sampling period was demonstrated to be negligible considering that <<0.001 % of the dose was excreted via urine for both metals, mirrored by either minimal or no increases in blood plasma concentrations.
The zirconium and praseodymium concentrations of the 24h-urine samples, collected during the day before final sacrifice, ranged from: 0.005 – 0.015 μg/L urine (mean: 0.009 ± 0.004) and 0.001 – 0.019 μg/L urine (mean: 0.011 ± 0.015) for Pr and from 0.261 – 0.648 μg/L urine (mean: 0.376 ± 0.155) and 0.118 – 0.434 μg/L urine (mean: 0.267 ± 0.14) for Zr for the male and female animals of the control group, respectively.
For the dosed group, the concentrations were 0.012 – 0.03 μg/L urine (mean: 0.023 ± 0.007) and 0.015 – 0.102 μg/L urine (mean: 0.048 ± 0.036)for Pr and 0.088 – 0.287 μg/L urine (mean: 0.22 ± 0.08) and 0.184 – 0.61 μg/L urine (mean: 0.396 ± 0.159) for Zr for the male and female animals, respectively.
Following a subtraction of the background urinary element excretion (control group), and considering the excreted urine volume (mean 21.4 mL (m) and 14.6 mL (f)) and the body weight of the animals at the end of the study (mean 369.2 g (m) and 223.92 g (f)), the following conclusion can be made:
From a final dose of 1,000 mg/kg of the pigment that the animals received on the last day of the study, only cumulated relative amounts of 0.000015 % (m) or 0.0000037 % (f) were found in the terminal 24-h urine collection period.
Summary of comparative Mass-Balance Study (Leuschner 2019a):
In a comparative mass balance study involving oral dosing of (i) the inorganic pigment "Zirconium praseodymium yellow zircon" and (ii) a soluble salt of the element contained therein (Pr3+), the gastrointestinal absorption as well as urinary and faecal excretion were compared, plus consideration of dietary „background“ intake/excretion via a vehicle-dosed control. For details, please refer to the corresponding robust study summary.
In brief, 10 (5m/ 5f) animals per group received a single oral dose of 1000 mg/kg of the pigment or 70 mg PrCl3,(corresponding to 40 mg/kg Pr). A third group served as vehicle treated control. Animals were individually housed in metabolic cages and daily samples of urine and faeces were collected for three days. All samples were analysed for praseodymium. The averaged “background” excretion via urine and faeces of the control animals was subtracted from the amounts excreted by the dosed animals, and a mass balance was calculated.
Animals that received 40 mg Pr/Kg bw (administered as PrCl3) excreted 91.5 % (Pr) of the administered dose (as mean, male and female animals) via urine (0.00015 %) and faeces (91.5 %) during the first three days after exposure.The largest fraction (85.49 % Pr) was excreted via faeces and urine already within the first 24 h.
Animals that received 1000 mg pigment /kg bw excreted 102 % Pr and 74.3 % Zr of the administered dose via urine and faeces during the first three days after exposure (mean for 10 animals). Within the first 24 hours approximately 100 % of Pr and 74.3 % Zr were excreted via faeces as largest fraction. Further 1.75 % and 0.14 % (Pr) were excreted via faeces on the second and third day.
Urinary excretion for Pr was negligible and below 0.00001 % and for Zr was < 0.00002 %.
Approximately 67.5 % of the administered dose for Pr and 72.8 % for Zr were determined indirectly by weighing the undigested pigment which could visually be observed and isolated in the faeces residues of the 0-24 h samples after the digestion procedure in highly acidic media in an ultrasonic bath. Samples for the 28-48 and 48-72 hour intervals did not show any obvious pigment residues (see pictures attached to the robust study summary “K_Leuschner_2017_mass balance”) which is in line with the observations received from other pigment studies that the majority of the pigment doses are excreted within the first 24 hours.
Since Zr4+ has a very low absorbance ability within the g.i. tract (<1 %) a hypothesis that this fraction was contained in the exsanguinated blood of the animals or has distributed to the organs seems not appropriate.
Overall the mass balances for Pr is essentially complete and indicates that the element contained in the pigment "Zirconium praseodymium yellow zircon", present as Pr3+ is not absorbed in the gastrointestinal tracts to any significant extent, but pass the animal effectively unchanged.
Summary of relative bioavailability study (Leuschner 2019b):
A relative bioavailability study involving serum kinetics over a period of 72 hours p. a. involving an i. v. dosing of a soluble Pr reference substance (praseodymium chloride) compared to single oral doses of the same substances and the pigment was performed. For details, please refer to the corresponding robust study summary. In brief, 10 animals (5m/5f) per group received single doses of (1) 0.7 mg/kg PrCl3intravenously, (2) 70 mg/kg PrCl3, via oral gavage, and (3) 1000 mg/kg of the pigment via oral gavage.
Blood samples were taken at 0, 1, 2, 4, 8, 12, 24, 48 and 72 hours post exposure and blood plasma samples were prepared and analysed for the element Pr.
Cmax-levels in plasma of 4.23 µg Pr/g and 4.40 µg Pr/g, were noted 1 hour (tmaxas mean m/f) after intravenous administration of a mixture of 0.7 mg/kg PrCl3for the male and female rats on test day 1, respectively.
Furthermore, Cmax-levels of 0.0002 µg Pr/g and 0.0001 µg Pr/g were noted ~3.2, or 1.2 hours (tmaxas mean m/f) after oral administration of 70 mg/kg PrCl3for the male and female rats on test day 1, respectively.
Lastly, Cmax-levels of 0.0002 µg Pr/g and 0.0001 µg Pr/g, were noted 0 - 1 hour (tmaxas mean m/f) after oral administration of 1000 mg pigment/kg for the male and female rats on test day 1, respectively. For comparison, the average (n=30) concentration of praseodymium in plasma taken before exposure at t=0 h was 6.8*10-6 µg Pr/g.
The plasma concentrations declined post dosing with an elimination half-life ranging from 2 to 25.5 hours for Pr.
For Pr an absolute bioavailability of 0.000048/ 0.000062 % (m/f) calculated from soluble PrCl3 following oral administration compared to intravenous administration, and a relative bioavailability of approximately 0.000007/0.000015 % (m/f) for Pr present in the pigment could be calculated.
In sum, experimentally determined plasma kinetic values for Pr are very consistent and the very low relative bioavailabilities of Pr from the pigment demonstrates that the pigment can be considered inert without any systemic hazard potential for human health.
Summary of lung burden analysis after 90-day inhalation (Creutzenberg, 2022)
Male rats were exposed to concentrations of 0.6, 2.5 and 9.99 mg zirconium praseodymium yellow zircon/m3 air for 6 hours per day, 5 days/week for 90 days via nose-only inhalation. The lung burden and clearance with zirconium praseodymium yellow zircon were determined 1, 28 and 90 days after the 90-day exposure period.
One day, 1 month and 3 months after end of exposure, in the low dose groups 0.25, 0.15 and 0.08 mg/lung, in the mid dose groups 1.48, 1.28 and 1.16 mg/lung, and in the high dose groups 5.25, 4.76 and 3.87 mg/lung of the test item Zirconium Praseodymium Yellow Zircon (Pigment 5) were determined, respectively.
The clearance half-time of the test item amounted to 59 days in the low dose group, thus was very close to the physiological half-time of approx. 60 days (ECETOC; 2013) or 50.5 days (median over all 5 sub-chronic inhalation toxicity studies, low-dose animals). In the mid and high dose group, half-times of 277 and 210 days, respectively, were determined, being well above a 4- to 5-fold increase as compared to the physiological values of 50.5 or 60 days. The concentration-dependent increase in clearance half-times is indicative for a poorly soluble low toxicity (PSLT) particle, which may lead to a lung overload condition, i.e. impaired clearance in which the deposited dose of inhaled PSLT in the lung overwhelms clearance from the alveolar region leading to a reduction in the ability of the lung to remove particles. The prolongation of the clearance half-time of two or more-fold above the physiological value in the high dose group demonstrates that an overload of particle clearance condition has been reached (Driscoll and Borm, 2020).
Overall conclusion:
The in-vitro and in-vivo experiments described above are in very good agreement with regards to the negligible level of bioavailability of the elements Zr and Pr contained in the pigment.
(1) In in-vitro dissolution experiments in artificial gastric fluid, dissolved Zr, Pr and Si concentrations from this pigment after 2h hours (2-hour gastric passage) were below LoD, 350 μg/L and 30 μg/L, respectively, even at the highest loading of 0.1g/L, corresponding to a solubility of less than 0.4 %.
(2) In a 28-day oral toxicity study with 1,000 mg/kg pigment no increase in Zr and Pr plasma and urine concentrations were observed when sampled at the end of the 28-day exposure period. From a final dose of 1,000 mg/kg of the pigment that the animals received on the last day of the study, only cumulated relative amounts of << 0.001 % (m/f) were found in the terminal 24-h urine collection period.
(3) In a mass balance study with a single oral dose of 1,000 mg/kg of the pigment, 102 % Pr and 74.3 % Zr of the administered dose was excreterd via urine and faeces during the first three days after exposure (mean for 10 animals). Within the first 24 hours approximately 100 % of Pr and 74.3 % Zr were excreted via faeces as largest fraction. Further 1.75 % and 0.14 % (Pr) were excreted via faeces on the second and third day.
Urinary excretion for Pr was negligible and below 0.00001 % and for Zr was < 0.00002 %.
(4) In a bioavailability study, the absolute (0.000055 % (Pr)) and relative (0.000011 % (Pr)) bioavailability of orally administered pigment was calculated in relation to a soluble Pr3+ compound (PrCl3), injected i.v..
(5) lung clearance half-time measurements in combination with the absence of local adverse effects after sub-chronic inhalation exposure in rats clearly show that Zirconium praseodymium yellow zircon fulfils the criteria as being a poorly soluble low toxicity particle (PSLT) with no intrinsic toxicity.
Comparing the findings of in-vitro dissolution testing (1) with in-vivo results (2-5), the in-vivo data consistently demonstrates slightly lower bioavailability and the general inertness of the substance. This is in agreement with the general understanding that in-vitro experiments in simulated gastric juice provide a conservative estimate of actual (in-vivo) bioavailability.
In conclusion, the oral relative bioavailability of the pigment "Zirconium praseodymium yellow zircon" can be assumed to be negligible, as demonstrated in three independent in-vivo studies in rats yielding very comparably results supported by an in-vitro dissolution experiment in five different artificial physiological media.
A rounded value of <<0.01 % for oral absorption can be taken forward from (i) terminal urine/plasma sampling in a study involving 28 repeated oral doses of 1,000 mg pigment/kg bw/d (<<0.001 % for Pr) and (ii) a mass balance study involving a single dose of 1,000 mg pigment/kg bw (0.00003 % for Pr and <<0.00001 % for Zr).
Absorption rate - oral: << 0.01 %
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)