Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

- General advice:

      Show the safety data sheet to the doctor in attendance.

      First aider needs to protect himself.

      Place affected clothing in a sealed bag for subsequent decontamination.

- Following inhalation:

      Move to fresh air.

- Following skin contact:

      Take off contaminated clothing and shoes immediately.

      Wash off with soap and plenty of water.

      If skin irritation occurs, seek medical advice/attention.

- Following eye contact:

      Rinse with running water whilst keeping the eyes wide open (at least 15 minutes)

      If eye irritation persists, consult a specialist.

- Following ingestion:

      Do NOT induce vomiting.

      Rinse mouth with water.

      If symptoms persist, call a physician.

- Most important symptoms and effects:

      No data available

Fire-fighting measures

- Suitable extinguishing media:

      Water spray

      Carbon dioxide (CO2)

      Foam

      Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

- Unsuitable extinguishing media:

      

      High volume water jet

- Special hazards arising from the substance or mixture:

      Harmful or toxic vapours are released.

      Combustible solid.

      Risk of dust explosion.

- Advice for fire fighter:

      Special protective equipment for firefighters

             Special protective equipment for firefighters

             Wear self-contained breathing apparatus for firefighting if necessary.

             Self-contained breathing apparatus (EN 133)

      Specific fire fighting methods

             Use appropriate means for fighting adjacent fires.

             Evacuate personnel to safe areas.

             Cool containers/tanks with water spray.

Accidental release measures

- Personal precautions, Protective equipment and emergency procedures:

      Remove all sources of ignition.

      Avoid contact with eyes

      Do not breathe vapour.

      Personal protective equipment

      Wear suitable gloves.

      Safety glasses

      Boots

      Mark the contaminated area with signs and prevent access to unauthorized personnel.

      Signal word

      Ventilate the area.

- Environmental precautions:

      Do not allow uncontrolled discharge of product into the environment.

- Methods and material for containment and cleaning up:

      Recovery

             Shovel or sweep up.

             Avoid dust formation.

             Use only non-sparking tools.

             Keep in properly labelled containers.

             Keep in suitable, closed containers for disposal.

      Decontamination/cleaning

             Wash off with plenty of water.

             Recover the cleaning water for subsequent disposal.

      Disposal

             Treat recovered material as described in the section "Disposal considerations".

Handling and storage

- Precautions for safe handling:

      Ground/bond container and receiving equipment.

      Potential dust explosion hazard.

      Non-sparking tools should be used.

      Dry powders can build static electricity charges when subjected to the friction of transfer and mixing operations.

      It is recommended that all dust control equipment such as local exhaust ventilation and material transport systems involved in handling of this product contain explosion relief vents or an explosion suppression system or an oxygen deficient environment.

      Avoid dust formation.

      Dust must be extracted directly at the point of origin.

- Hygiene measures

      - The substance/product is registered with strictly controlled conditions as defined in Article 18(4) of Regulation (EC) No. 1907/2006 (REACH Regulation) and must therefore be handled as such.

      - Wash hands before breaks and at the end of workday.

      - When using do not eat, drink or smoke.

- Conditions for safe storage, including any incompatibilities:

      Technical measures/Storage conditions

             The floor of the depot should be impermeable and designed to form a water-tight basin.

             Stable under normal conditions.

             Keep container tightly closed and dry.

             Keep away from open flames, hot surfaces and sources of ignition.

             Keep away from: Strong oxidizing agents

      Packaging material

             Suitable material

                    Coated steels.

             Remarks

                    Steel drums with an inner lining.

                    glass bottles

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
not regulated
Shippingopen allclose all
Labels:
not regulated
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
not regulated
Shippingopen allclose all
Labels:
not regulated
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
not regulated
Shipping information
Proper shipping name and description:
not regulated
Chemical name:
not regulated
Labels:
not regulated
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
not regulated
Shipping information
Proper shipping name and description:
not regulated
Chemical name:
not regulated
Labels:
not regulated
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates and, in case the substance is transported to other sites for further processing, the substance should be handled at these sites under the Strictly Controlled Conditions as specified in REACH regulation Article 18(4). Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each manufacturing site.

Written confirmation of application of Strictly Controlled Conditions has been received from every affected Distributor and Downstream Processor/User of the Registrant’s intermediate.

1. Engineering measures

      Effective exhaust ventilation system

2. Protection measures

      Selection of appropriate personal protective equipment should be based on an evaluation of the performance characteristics of the protective equipment relative to the task(s) to be performed, conditions present, duration of use, and the potential hazards and/or risks that may occur during use.

      The protective equipment must be selected in accordance with current local standards and in cooperation with the supplier of the protective equipment.

      The protective equipment must be selected in accordance with current CEN standards and in cooperation with the supplier of the protective equipment.

3. Hand protection

      Where there is a risk of contact with hands, use appropriate gloves

      Gloves must be inspected prior to use.

      Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough

      The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.

5. Body protection

      Choose body protection according to the amount and concentration of the dangerous substance at the work place.

      Remove and wash contaminated clothing.

      Wear suitable protective clothing, gloves and eye/face protection.

      Remove and wash contaminated clothing before re-use.

6. Eye protection

      Safety glasses with side-shields

7. Respiratory protection

      Use a respirator with an approved filter if a risk assessment indicates this is necessary.

8. Hygiene measures

      The substance/product is registered with strictly controlled conditions as defined in Article 18(4) of Regulation (EC) No. 1907/2006 (REACH Regulation) and must therefore be handled as such.

      Wash hands before breaks and at the end of workday.

      When using do not eat, drink or smoke.

Stability and reactivity

1. Reactivity

      No hazards to be specially mentioned.

2. Chemical stability

      Stable at room temperature.

3. Possibility of hazardous reactions

      - Hazardous polymerisation does not occur.

4. Conditions to avoid

      Heat, flames and sparks.

      Static electricity

      Avoid dust formation.

5. Incompatible materials

      Strong oxidizing agents

6. Hazardous decomposition products

      On combustion or on thermal decomposition (pyrolysis) releases:

      Toxic Gas

      Carbon oxides

Disposal considerations

Product Disposal Prohibition :

      Do not dispose of with domestic refuse.

      Must be incinerated in a suitable incineration plant holding a permit delivered by the competent authorities.

Advice on cleaning and disposal of packaging

      Allow it to drain thoroughly.

      Must be incinerated in a suitable incineration plant holding a permit delivered by the competent authorities.

      Dispose of in accordance with local regulations.

Measure for waste avoidance or recovery

      Do not dispose of with domestic refuse.

Categories Display