Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 294-600-1 | CAS number: 91744-38-6
Guidance on Safe Use
Administrative data
First-aid measures
General information: If symptoms persist or in case of doubt, seek medical advice.
After inhalation: Supply fresh air; consult a doctor in case of pain.
After skin contact: Rinse with plenty of water.
After eye contact: Rinse opened eye for several minutes under running water.
After swallowing: Seek medical treatment.
Do not induce vomiting without a physician.
Never give anything by mouth to an unconscious person.
Most important symptoms and effects, both acute and delayed: No further relevant information.
Indication of any immediate medical attention and special treatment needed: Symptomatic treatment.
Fire-fighting measures
Extinguishing media
Suitable extinguishing agents: CO2, extinguishing powder or water spray.
Use fire-fighting measures that suit the environment.
For safety reasons unsuitable extinguishing agents: High volume water jet.
Special hazards arising from the substance or mixture:
No further relevant information available.
Advice for fire fighters:
Protective equipment: Wear self-contained respiratory protective device.
Additional information: Cool endangered receptacles with water spray.
Dispose of fire debris and contaminated fire-fighting water in accordance with official regulations.
Accidental release measures
Personal precautions, protective equipment and emergency procedures:
Wear protective clothing.
Product forms slippery surface when combined with water.
Environmental precautions:
Do not allow product to reach sewage system or any water course.
Do not allow to penetrate the ground/soil.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Make sure to recycle or dispose of in suitable receptacles.
Handling and storage
Precautions for safe handling:
Prevent formation of dust. Any depsoit of dust which cannot be avoided must be regularly removed.
Information about protection against explosions and fires:
Observe the general rules of industrial fire protection.
Conditions for safe storage, including any incompatibilities:
Requirements to be met by storerooms and receptacles:
Store cool and dry in a well ventilated area.
Information about storage in one common storage facility:
Store away from foodstuffs. Store away from feed.
Further information about storage conditions: Protect from heat and direct sunlight.
Storage class: 11 Combustible solids.
Specific end use(s): No further relevant information available.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Additional information about design of technical systems:
Mechanical ventilation/exhaustion is strongly recommended.
Control parameters:
Components with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace.
Additional information: The lists that were valid during the creating were used as basis.
Observe general threshold limit for dust.
Exposure controls:
Personal protective equipment:
General protective and hygienic measures:
The usual precautionary measures should be adhered to when handling chemicals.
Do not inhale dust/smoke/mist.
Breathing equipment:
In the case of unintentional release of substance, exceeding the occupational exposure limit value:
Short term filter device: Filter P2, Filter P3.
Breathing equipment is only to be used in order to handle the residual risk of short term jobs if all other minimizing measures have been carried out e.g. retention and/or local exhaust.
Protection of hands:
Chemical resistant gloves.
The glove material has to be impermeable and resistant to the product/substance/preparation.
Due to missing tests no recommendation to the glove material can be given for the product/preparation/chemical mixture.
Selection of the glove material in consideration of the penetration times, rates of diffuision and the degradation.
Material of gloves:
The selection of suitable gloves depends upon the material, and also upon the quality of the gloves. The degree of protection will vary from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material:
The exact penetration time has to be found out by the maufacturer of the protective gloves and has to be observed.
For the permanent contact gloves made from the following materials are suitable:
Nitrile rubber, NBR
(Thickness: 0.35mm; Permeation time >=480 minutes)
Butyl rubber, BR
(Thickness: 0.5mm; Permeation time >= 480 minutes)
Eye protection: safety glasses.
Body protection: Protective work clothing.
Stability and reactivity
Reactivity:
Chemical stability:
Thermal decomposition / conditions to be avoided:
To avoid thermal decomposition do not overheat.
No decomposition if used and stored according to specifications.
Possibility of hazardous reactions: No dangerous reactions known.
Conditions toavoid: Strong heating, dirt, chemical contamination, sunlight, UV or ionizing radiation.
Incompatible materials: No further relevant information available.
Hazardous decomposition products:
No hazardous decomposition products if instructions for storage and handling are followed.
Disposal considerations
Waste treatment methods:
Recommendation: Disposal according to instructions of local authorities.
Uncleaned packagings:
Recommendation: Disposal must be made according to official regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
