Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Emergency measure - Inhalation: Immediately remove person to fresh air. Keep warm and
rested. Seek immediate medical attention.
Emergency measure - Eyes: Wash affected area with clean water for at least 15 minutes,
remove any foreign matter and seek medical attention.
Emergency measure - Skin: Immediately remove contaminated clothing. Rinse the
affected area with running luke-warm water or clean the area
with soap and water. Seek medical attention.
Emergency measure - Ingestion: Seek immediate medical attention.

Fire-fighting measures

Recommended extinguishing agent: Dry chemical powder, carbon dioxide, foam and dry sand can
be used.


In case of fire, restrict area around to authorised
personnel. Cool surrounding facilities with water. Move
containers to safe place, if possible.

Product arising from burning: The polymer is stable at room temperature. No decomposition
occurs below 150°C.

Product determined by test: N

Protective equipment: Fire fighters should wear full protective equipment,
including self-contained breathing apparatus.

Accidental release measures

Emergency measures in case of spillage: In case of spillage remove all unauthorised personnel from
the area. Authorised personnel should wear appropriate
personal protective equipment and work from the windward
side. Remove sources of ignition. Collect the spillage
together and vacuum. Prevent the substance from entering
the drains. The collected material can then be disposed of
by incineration.

Handling and storage

Handling: Prevent chemical inhalation and chemical contact with the
eyes, skin and mucous membranes. Wear appropriate
protective clothing, such as gas masks against organic
gases, gloves, goggles and face-masks, boots, protective
clothing and aprons.


Ensure adequate ventilation in work areas. Prohibit high
temperature, sparks or sources of ignition in work areas.
Use anti-static, explosion-proof electrical instruments in
work areas.


Handle containers with care to prevent them from falling,
being dragged or receiving impact. Avoid spillage when
transferring chemicals from containers.


Wash thoroughly after handling. Change and launder clothes
if contamination occurs.

Storage: Store containers away from direct sunlight in a
well-ventilated area.


Locate storage areas away from fire and heat sources.

Packaging of the substance and or preparation: The test substance is imported in 20 kg craft laminated
paper bags or plastic-lined fibre drums.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Transport: Not classified for transport
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: The polymer is stable under recommended handling conditions.

Chemical reaction with water: None known.

Dust explosion: The test substance is an organic powder. Therefore, care
should be taken to avoid generating dust during handling
operations. Care should also be taken to prevent generation
of sparks/ sources of ignition.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: It is not possible to recover/ recycle used test substance.

Industry - Possibility of neutralisation: Noone reported

Industry - Possibility of destruction: controlled discharge: Not applicable.

Industry - Possibility of destruction - incineration: Incineration is the preferred option (method 660).

Industry - Possibility of destruction - water purification: Not applicable.

Industry - Possibility of destruction - other: None identified.

Public at large - Possibility of recovery/recycling: Not applicable, as the public at large will not use the test
substance.