Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 606-460-4
CAS number: 201855-65-4
After inhalation: Move the affected person to fresh air, put at rest, keep the victim warm.After skin contact: Immediately remove contaminated clothing, wash off the skin with plenty of water.After eye contact: Rinse the eyes with water for several minutes with eyelids open wide. Having rinsed the eyes, obtain ophthalmologic attention as soon as possible.After swallowing: Wash out the mouth with plenty of water, give plenty of water to drink, then obtain medical attenton immediately.Information for doctor: The physician must be informed on the time, type and extent of exposure. If needed, show the safety data sheet to the physician.
Suitable extinguishing media: Available extinguishing media: water spray, extinguishing powder, carbon dioxid, foam.Unsuitable extinguishing media: Full waterjet are not suitable for extinguishing.Special hazards arising from the substance or mixture:Substance is combustible. Combustion products: hydrogen fluoride, nitrogenoxides, carbonmonoxide/dioxide.Advice for firefighters:Outdoors stay on the weatherside and extinguish from there. In closed places, and in case of wreck, wear fireproof working clothes and use selfcontained breathing apparatus.
Personal precautions, protective equipment and emergency procedures:Only the trained personnel in charge of release is allowed to be present at the site of spilling, wearing the prescribed protective equipments.Environmental precautions:Hinder the spilled substance from entering the soil, sewers or living water.Methods and material for containment and cleaning up:Collect spilt substance aspiring to the lowest possible dustlevel. Put the collected substance into adequately labelled empties and transport them to the site of disposal, then wash the contaminated area with plenty of water.
Precautions for safe handling:Take off contaminated clothing avoiding contamination of skin. It is necessary to wash a hand and a face with water and a soap after the work made with the substance. All work processes must always be designed so minimize or exclude the risk of exposure.Conditions for safe storage, including any incompatibilities:Store it in a wellventilated, cool, dry place. Storage in a tightly fitting package.
This intermediate is handled under Strictly Controlled Conditions in accordance with the ECHA REACH Guidance on Intermediates.The substance is rigorously contained during storage, the packaging is opened only in case of sampling, and when the substance is used in the process. When the substance is put in the reactor, air filtration (99% efficiency) is used along with personal protective equipment. The process is thereafter fully closed; no emission is detected until sampling of the reaction mass. During sampling air filtration (99% efficiency) is used along with personal protective equipment. At the end of the process, during the unloading of the substance and the sampling general air filtration is used along with personal protective equipment.No occupational limits have been established.Individual protection measures / personal protective equipment:The personal protective equipment for the working process are determined by internal standards.Wear closed protection glasses. Closed protective clothing against particulate matter. Protective gloves made of neopren-Wear P3 dust mask for respiatory protection.
The substance is stabil on 15-30 °C for 9 months.Chemical stability: Stable under normal circumstances.Possibility of hazardous reactions: danger of electrostatic charge. May react with substance in section Incompantibility materials.Conditions to avoid: intense light, intense heat.Incompatible materials: strong mineral acids, strong basics, strong oxidisers.
Suggestions for disposal procedures of the substance/product:Incineration in a special waste incineration plant. Halogen, nitrogen content of the substance should be considered when incinerated.Suggestions for disposal procedures of contaminated packaging (vessels):Flammable empties must be incinerated in waste increation plant, in compliance with local regulations. Empties should be washed with plenty of water before reuse/recycling.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again