Coconut oil, reaction products with boric acid (H3BO3), diethanolamine and glycerol

Guidance on Safe Use

First-aid measures

Eye: Flush eyes with water immediately while holding the eyelids open. Remove contact lenses, if worn, after initial flushing, and continue flushing for at least 15 minutes. Get medical attention if irritation persists.Skin: Wash skin with water immediately and remove contaminated clothing and shoes. Get medical attention if any symptoms develop. To remove the material from skin, apply a waterless hand cleaner, mineral oil, or petroleum jelly. Then wash with soap and water. Discard contaminated clothing and shoes or thoroughly clean before reuse.Ingestion: If swallowed, get medical attention. Do not induce vomiting. Never give anything by mouth to an unconscious person.Inhalation: Move the exposed person to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention if breathing difficulties continue.

Fire-fighting measures

EXTINGUISHING MEDIA: Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames.PROTECTION OF FIRE FIGHTERS:Fire Fighting Instructions: This material will burn although it is not easily ignited. See Section 7 for proper handling and storage. For fires involving this material, do not enter any enclosed or confined fire space without proper protective equipment, including self-contained breathing apparatus.Combustion Products: Highly dependent on combustion conditions. A complex mixture of airborne solids, liquids, and gases including carbon monoxide, carbon dioxide, and unidentified organic compounds will be evolved when this material undergoes combustion.

Accidental release measures

Protective Measures: Eliminate all sources of ignition in vicinity of spilled material.Spill Management: Stop the source of the release if you can do it without risk. Contain release to prevent further contamination of soil, surface water or groundwater. Clean up spill as soon as possible, observing precautions in Exposure Controls/Personal Protection. Use appropriate techniques such as applying non-combustible absorbent materials or pumping. Where feasible and appropriate, remove contaminated soil. Place contaminated materials in disposable containers and dispose of in a manner consistent with applicable regulations.Reporting: Report spills to local authorities

Handling and storage

Precautionary Measures: Do not get in eyes, on skin, or on clothing. Do not breathe vapor or fumes from heated material. Do not taste or swallow. Do not breathe vapor or fumes. Wash thoroughly after handling.General Handling Information: Avoid contaminating soil or releasing this material into sewage and drainage systems and bodies of water.Static Hazard: Electrostatic charge may accumulate and create a hazardous condition when handling this material. To minimize this hazard, bonding and grounding may be necessary but may not, by themselves, be sufficient. Review all operations which have the potential of generating and accumulating an electrostatic charge and/or a flammable atmosphere (including tank and container filling, splash filling, tank cleaning, sampling, gauging, switch loading, filtering, mixing, agitation, and vacuum truck operations) and use appropriate mitigating procedures.Container Warnings: Container is not designed to contain pressure. Do not use pressure to empty container or it may rupture with explosive force. Empty containers retain product residue (solid, liquid, and/or vapor) and can be dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, static electricity, or other sources of ignition. They may explode and cause injury or death. Empty containers should be completely drained, properly closed, and promptly returned to a drum reconditioner or disposed of properly.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:

UN3082

Shipping information

Proper shipping name and description:

ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.

Chemical name:

BORATED POLYALKYLAMIDO POLYOL

Language:

English

Special provisions / remarks

Special provisions:

Road tunnel restriction code: (E); Hazard ID No.: 90

Inland waterway transport (UN RTDG/ADN(R))

UN number:

UN3082

Shipping information

Proper shipping name and description:

ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.

Chemical name:

BORATED POLYALKYLAMIDO POLYOL

Language:

English

Remarks

Marine transport (UN RTDG/IMDG)

UN number:

UN3082

Shipping information

Proper shipping name and description:

ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.

Chemical name:

BORATED POLYALKYLAMIDO POLYOL

Marine pollutant

Remarks

Air transport (UN RTDG/ICAO/IATA)

UN number:

UN3082

Shipping information

Proper shipping name and description:

ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.

Chemical name:

BORATED POLYALKYLAMIDO POLYOL

Remarks

SpecialProvisions

Exposure controls / personal protection

GENERAL CONSIDERATIONS:Consider the potential hazards of this material (see Section 3), applicable exposure limits, job activities, and other substances in the work place when designing engineering controls and selecting personal protective equipment. If engineering controls or work practices are not adequate to prevent exposure to harmful levels of this material, the personal protective equipment listed below is recommended. The user should read and understand all instructions and limitations supplied with the equipment since protection is usually provided for a limited time or under certain circumstances.ENGINEERING CONTROLS:Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below the recommended exposure limits.PERSONAL PROTECTIVE EQUIPMENT:Eye/Face Protection: Wear protective equipment to prevent eye contact. Selection of protective equipment may include safety glasses, chemical goggles, face shields, or a combination depending on the work operations conducted.Skin Protection: Wear protective clothing to prevent skin contact. Selection of protective clothing may include gloves, apron, boots, and complete facial protection depending on operations conducted. Suggested materials for protective gloves include: Nitrile Rubber, Silver Shield, Viton.Respiratory Protection: Determine if airborne concentrations are below the recommended occupational exposure limits for jurisdiction of use. If airborne concentrations are above the acceptable limits, wear an approved respirator that provides adequate protection from this material, such as: Air-Purifying Respirator for Organic Vapors.Use a positive pressure air-supplying respirator in circumstances where air-purifying respirators may not provide adequate protection.

Stability and reactivity

Chemical Stability: This material is considered stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.Conditions to Avoid: Do not heat above flash point.Incompatibility With Other Materials: May react with strong acids or strong oxidizing agents, such as chlorates, nitrates, peroxides, etc.Hazardous Decomposition Products: None known (None expected)Hazardous Polymerization: Hazardous polymerization will not occur.

Disposal considerations

Use material for its intended purpose or recycle if possible. This material, if it must be discarded, may meetthe criteria of a hazardous waste as defined by international, country, or local laws and regulations.In accordance with European Waste Catalogue (E.W.C.) the codification is the following: 07 07 99.